Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tice
If you’re searching for Gate Repair in Tice, you’re probably dealing with a gate that won’t close, won’t open, or got knocked out of plumb by the last storm. We fix that. Tampa Gate Company serves Tice daily with a gate-only repair crew that diagnoses the problem, quotes the price, and does the work right. Call (866) 976-0095 for a free estimate, and we’ll get your gate secure again.
We know Tice’s gates better than most because we see what this area does to them. Unincorporated lots off Palm Beach Boulevard mean older chain-link and wrought-iron drive gates, not HOA-approved aluminum builds. Saturated sandy soil shifts. Salt-humid air eats posts. Hurricanes slam gates hard. Our repair work reflects all of that, not a generic checklist.
Why Tampa Gate Company Is Tice’s Preferred Gate Repair Company
Tice homeowners and property managers call us for one reason: we’re a gate company, not a general contractor with a gate sideline. Every technician we send to Tice works on gates all day, every day. We recognize a rusted D&D hinge post or a failing Mighty Mule arm on sight, and we stock the parts to fix it without waiting a week.
Our repair-first approach matters here. Tice’s housing stock is older, much of it 1950s through 70s concrete-block and wood-frame on big lots. People don’t want a sales pitch for a $4,000 replacement when a $260 hinge-post reset gets the gate swinging again. We quote repair first, and we only recommend replacement when the repair honestly won’t last. Noel Carver, our owner, built Tampa Gate Company on that principle.
We also know the local terrain. Lots in Tice run flat and low, with sandy soil that drains poorly after heavy rain. Posts set without adequate footings heave. Photocells corrode in the wet-season humidity. Gates warp under the subtropical sun. We plan repairs around those conditions, not around what worked in a Tampa subdivision.
Styles & brands we work with
Wood Gate Repair in Tice
Wood Gate Repair in Tice usually means one of two things: a sagging frame that drags on the ground, or a rotted post and rail assembly that’s started to lean. Tice’s humid, rainy summers and intense UV punish wood gates faster than most of Southwest Florida. We reset hinge posts with fresh concrete, sister rotted rails, replace snapped hinges, and straighten frames until the gate closes clean.
What does wood gate repair cost in Tice? A simple hinge-and-latch adjustment runs $120 – $220. Replacing a rotted post and resetting the footing is $280 – $450. Reframing a gate panel or replacing substantial rot can push $500 – $800 depending on lumber size and hardware. Every job gets a written quote before we start, and you’ll approve the price before any work happens.
Fixing sagging and dragging gates
Most sagging wood gates in Tice fail at the hinge side, not the latch side. The post leans under the gate’s weight, the hinges pull loose, and the gate drags a groove into the grass or concrete. We solve it by re-plumbing the post, upgrading hinge screws to structural fasteners, and sometimes adding a tension cable or wheel.
Replacing rotted posts and rails
Ground contact is the killer here. Tice’s wet season holds moisture against the post base for months, and untreated wood rots fast at that transition point. We dig out the old post, pour a proper footing, and set a pressure-treated or steel-reinforced post that drains instead of soaking.
Driveway Gate Repair in Tice
Driveway Gate Repair in Tice almost always starts with the question, “Is it the post, the frame, or the opener?” On most Tice lots, it’s the post. The gate posts on older properties along roads like Buckingham Road and Ortiz Avenue were set decades ago, often with shallow footings never designed for Southwest Florida storms. Saturated sandy soil loosens them, and the whole gate leans and binds.
Costs for driveway gate repair in Tice run $180 – $340 for hinge and latch work on a metal gate. If a post needs to be pulled, re-footed, and re-set with fresh concrete, expect $350 – $650. Full re-alignment of a double-leaf driveway gate with new hardware can reach $700 – $950 depending on gate size and post condition. You’ll get the exact number before we touch the gate, not after.
Post resets and footing repair
We pull the existing post, inspect the underground condition, and re-set it in fresh concrete with a deeper footing than the original. In Tice’s sandy soil, a 3-foot footing beats a 18-inch footing, period. We also check the second gate leaf and the latch side while we’re in the ground.
Electric driveway gate repair
If the motor runs but the gate won’t move, or the gate moves but the motor screams, we dig into the operator, the control board, and the safety photocells. We service LiftMaster, Mighty Mule, and FAAC units specifically, and we carry most common boards and sensors on the truck. Same-day service for Tice calls depends on the call volume, not on our willingness.
Trusted Brands We Service in Tice
We work on the brands you actually have. LiftMaster swing gate operators are everywhere in Tice, from older homes with vintage models to newer retrofits. We also service Mighty Mule and FAAC units on a regular basis, plus the full spread of major gate brands. Because we see these systems in Tice day in and day out, our trucks carry the parts that matter locally: photocells, control boards, hinge rebuild kits, and post-repair hardware. That means fewer trips and faster repairs for you.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tice Homes
- Hinge posts heaved out of sandy soil after heavy rain. A summer squall drops three inches of rain, the sandy ground under the post turns to slurry, and the post tips. The gate frame is still fine, but it’s now a full post reset job.
- Rusted posts snapping at the footing, not at the hinge. Salt-laden humid air attacks the steel right where it meets the concrete. The visible metal looks okay, but the underground section is nearly gone. We cut, sleeve, and re-anchor.
- Power cuts leaving automatic gates stuck open or dead. After a storm knocks out power, the operator won’t respond, and the gate is stuck. The manual release matters here. More on that below.
- UV-damaged safety photocells and sensors. The plastic housings and lenses on retrofitted openers cloud, crack, and misread. That triggers the auto-reverse or stops the gate entirely. We replace the sensors and recalibrate the entrapment protection.
Pricing for Gate Repair in Tice, FL
Here’s what gate repair actually costs in Tice, based on the jobs we do here every week. Minor hinge and latch work runs $120 – $230. Gate re-alignment and sag correction runs $180 – $340. Post re-setting with new concrete runs $350 – $650. Electric gate diagnosis and board or sensor replacement runs $220 – $480. Full gate replacement starts around $800 and goes up from there, but repairs are almost always the more affordable answer on Tice’s older gates. Every estimate is free, and the price is locked in before work starts.
We Also Serve Cities Near Tice
If you’re just outside Tice, Gate Repair in Tice covers the surrounding communities too. We regularly serve Lochmoor Waterway Estates, North Fort Myers, Buckingham, and Fort Myers Shores. Same team, same gate-only specialty, same fast response across the east Fort Myers area.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tice
Pull the manual release handle on the operator, which disengages the motor from the drive mechanism, then push the gate open slowly by hand. On LiftMaster and Mighty Mule swing operators, the release is usually a red handle or pull-cord near the motor. After you restore power, cycle the gate, and if it won’t re-lock into gear or it faults, call (866) 976-0095 and we’ll sort it out. Never force the gate when the motor is still engaged. That bends the drive arm and strips the gear.
Because Tice sits on sandy soil that saturates fast in a storm, and the waterlogged ground loses its grip on shallow footings. The post doesn’t snap; it tilts or lifts as the soil around it liquifies. The fix is a deeper footing with new concrete, not just bracing the post upright. We see this on nearly every post-storm call out here.
The hinge post is almost certainly tipped or sunk, which throws the gate out of square and makes it drag. On most Tice gates, the frame is fine and the real problem is at the base of the post, underground, where you can’t see it. We reset and re-anchor the post and the sag usually disappears without touching the gate panel itself.
Place a solid object in the gate’s path and try to close it. The gate should stop and reverse before making firm contact. If it doesn’t, the safety photocells, the current sensing circuit, or the control board has a problem that could seriously injure someone. UL 325 requires operational entrapment protection on every automatic gate. If yours isn’t working, treat it as urgent and call us for a safety inspection.
Yes, almost always. We repair first. That’s the whole point of our company. We replaced rusted posts, rebuilt hinges, swapped out boards and sensors, and kept vintage operators running on Tice properties for years. Replacement only comes up when the gate or operator is beyond a safe, lasting repair.
Call (866) 976-0095 for gate repair in Tice. We’ll answer, ask you a few questions, and show up ready to fix the gate. Free estimates, upfront pricing, and the work is done right the first time by a gate specialist, not a handyman.
Written by Noel Carver, Owner at Tampa Gate Company, serving Tice and the east Fort Myers area.