Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Temple Terrace, FL
Gate installation in Temple Terrace usually runs $1,800 to $7,500 for a complete residential system, with the final number driven by gate width, material, and whether you’re adding automation from day one. Most Temple Terrace homes we visit sit on older lots where driveway and pool-enclosure gates have been in place for decades, so our work here leans heavily toward replacing worn posts and hardware on existing openings rather than starting from bare ground. If your gate is sagging, rusted through, or no longer closes square, call Tampa Gate Company at (866) 976-0095 for a straight answer on repair versus replacement.
Why Temple Terrace Homes Are Different
Temple Terrace is an established, mostly built-out city in ZIP 33617 where a large share of driveway and pool-enclosure gates sit on older lots under mature live-oak canopy. That canopy keeps gate posts and hinges chronically damp and shaded, so rust and wood rot show up on the hardware even when the rest of the fence looks fine. We see this constantly: a homeowner calls about a gate that drags, and the real problem is a post that’s been quietly rotting at ground level for five years.
The housing stock here ranges from mid-century ranch and block homes to later infill, typically with driveways, side-yard gates, and screened pool enclosures. Many gate posts are original and decades old. What that means practically is that Temple Terrace gate work is often about correcting long-term sag, rust, and post settle on aging installations rather than new construction. It’s a fully residential, non-HOA-dominated context, so most calls come from individual homeowners who just want their gate working and their yard secure again. The humid subtropical climate, with its heavy summer rains and hurricane-season wind, accelerates the rust cycle. Salt air is not a major factor this far inland, but humidity and storm exposure absolutely are.
Styles & brands we work with
Our Main Temple Terrace Services
Most Temple Terrace homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric gate that has stopped responding entirely. Both are covered below with dedicated pages for the full detail.
Gate Repair in Temple Terrace
Gate repair in Temple Terrace is frequently about correcting what decades of humidity and post settle have done to an older installation. We rebuild sagging frames, reset posts that have shifted out of square, replace rusted hinges and latch hardware, and get the gate swinging or sliding cleanly again. In this climate, a hinge that’s been quietly corroding under the oak canopy will eventually seize or snap, and the fix is often straightforward once the right part is matched. We repair first on principle: replacement is only the recommendation when repair genuinely isn’t the right answer for the gate you have. Get the full breakdown on our Gate Repair in Temple Terrace page.
Electric Gate Repair in Temple Terrace
Electric gate breakdowns in Temple Terrace tend to follow a pattern: heavy rain finds a weak point in a control box seal, humidity takes a toll on a board connection, or a lightning-adjacent storm surge cooks a transformer. We diagnose the motor, the control board, and the safety loop, not just the obvious, because the visible symptom is rarely the root cause. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems specifically, so your opener isn’t a mystery to us. Full detail is on our Electric Gate Repair in Temple Terrace page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Temple Terrace
Gate installation in Temple Terrace is usually a replacement-first conversation. The homes here were built over decades, the lots are established, and the original gate systems are often at the end of their useful life. When you’re putting in a new gate in this city, the two questions that matter most are whether the existing posts can be saved and whether the new gate should be automated from the start. We walk through both before quoting anything, and every price is agreed in writing before we touch a tool.
We handle the full scope: automatic gates, manual gates, driveway and pedestrian gates, sliding and swing configurations. We’ll spec the right system for the opening you have, not sell you a one-size-fits-all package. If you’re still deciding between repair and replacement, read the detail on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You want the gate to open from the car or the house without stepping out, or you’re replacing an opener that has failed beyond the point of sensible repair.
What it costs in Temple Terrace
Automatic gate installation in Temple Terrace typically runs $3,000 to $9,500 depending on gate size, opener type, and whether new posts or conduit runs are required.
How we do it
We set or confirm the posts, mount the opener and arm, run the power and control wiring, install the safety edges and photo eyes, then cycle the gate and adjust limits until it opens and closes cleanly every time.
Driveway Gate Installation
Signs you need it
Your current driveway gate is sagging past adjustment, the posts are rotted or leaning, or you’re closing off a driveway that was never gated before and needs a clean, matched installation.
What it costs in Temple Terrace
A new driveway gate in Temple Terrace typically lands between $1,800 and $8,500, with the spread set by width, material, and whether you add an opener.
How we do it
We measure the opening, check the ground for level and drainage, set reinforced posts in concrete, hang the gate leaf, align the latch and stops, and if it’s automated, wire the opener and safety loop before final testing.
What Gate Installation Costs in Temple Terrace
| Item | Typical range in Temple Terrace |
|---|---|
| Manual driveway gate, single leaf | $1,800 – $5,500 |
| Automatic gate system with opener | $3,000 – $9,500 |
| Pool enclosure gate replacement | $450 – $1,400 |
Does Temple Terrace require a permit for a new gate?
Within Temple Terrace city limits, most driveway and side-yard gate replacements do not require a building permit, but any new electrical run for an automatic opener may need an electrical permit. We’ll tell you what applies to your specific job before quoting. Call (866) 976-0095 and we’ll check the requirements for your address.
How long does a gate installation take in Temple Terrace?
Most manual gate replacements take one day on site. Automatic gate installations range from one to two days depending on the power run, the opener type, and whether we’re removing rotted posts and pouring new footings. We’ll give you a firm timeline with your written quote. Call (866) 976-0095 to schedule a measure.
Brands We Service in Temple Terrace
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, along with most other major gate brands in the field. That brand familiarity is what lets us identify a control board, safety loop, or opener arm on sight and get the right part ordered fast. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Temple Terrace, FL
| Service | Typical range in Temple Terrace |
|---|---|
| Manual driveway gate installation | $1,800 – $5,500 |
| Pool enclosure gate replacement | $450 – $1,400 |
| Gate opener motor replacement | $600 – $1,600 |
| Control board replacement | $400 – $950 |
| Hinge and latch rebuild | $220 – $520 |
| Post reset or replacement | $350 – $850 |
| Safety sensor or loop repair | $300 – $700 |
| Full gate frame rebuild | $900 – $2,600 |
In Temple Terrace, prices get pushed higher by rotted original posts that need full removal and new concrete, plus any time we’re working around mature oak roots that have shifted an opening out of square. Regardless of the job size, you’ll get a written price agreed before any work starts, so the invoice never surprises you.
Neighborhoods We Serve in Temple Terrace
We cover the entire city from the older mid-century blocks near the Hillsborough River eastward through the infill neighborhoods off Harney and Bullard. Most Temple Terrace calls are within a short drive, so we can typically be on site quickly for gate repairs and schedule installations without long lead times.
- Temple Terrace Estates
- Bon-Air
- Temple Park
- Avon Springs
- Terrace Park
Service Area – Cities Near Temple Terrace
Beyond Temple Terrace, we regularly work in the communities that border the city and share the same housing era and climate pattern. That includes East Lake-Orient Park, FL, University, FL, Pebble Creek, FL, and Thonotosassa, FL. If you’re in one of these areas and your gate is failing, call and we’ll get you on the schedule.
Serving Temple Terrace, FL — Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Temple Terrace
For gate repairs that leave your yard unsecured, we prioritize Temple Terrace calls and can usually be on site fast. Installations and new automatic gate builds are scheduled with a written measure and a firm date. Call (866) 976-0095 and we’ll tell you the next available slot.
Most Temple Terrace neighborhoods are not HOA-governed, so a straightforward like-for-like replacement rarely needs an approval letter. If you’re changing the gate’s height, material, or style, and you do have a deed restriction, we’ll help you check what’s needed. Bring us a photo and we’ll walk you through it.
Sometimes yes. If the posts are solid and square, we can swap just the gate leaf and hardware. In Temple Terrace’s damp, shaded lots, the most common situation is a post that looks fine above ground but is failing below it. We’ll assess that on site and tell you honestly whether the posts are reusable.
If your Temple Terrace gate is sagging, rusted, or refusing to open, call Tampa Gate Company at (866) 976-0095 for a free estimate. One call to a specialist, not a generalist with a side interest in gates.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple Terrace Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett