Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in University, FL
Gate installation in University, FL means something different than it does almost anywhere else in the Tampa Bay area. This is not a market of single-family homeowners adding a decorative driveway gate. It’s property managers, landlords, and HOAs responsible for shared community gates, pool enclosures, and amenity access points that hundreds of student tenants depend on every day. Tampa Gate Company has served University since 2013, and we know these systems inside out. When a gate fails here, it’s rarely a convenience issue. It’s a security and access problem that needs a specialist who can diagnose and fix it right the first time. Call us at (866) 976-0095 for a free estimate on any gate project in the 33613 corridor.
Why University Homes Are Different
The 33613 zip code runs through the heart of USF-area housing, and that shapes almost every gate job we take on here. The housing stock leans heavily toward 1970s and 80s apartment complexes, rental duplexes, and a growing number of newer mid-rise student housing buildings. Most of the gates we service in University are shared vehicular entry gates on aging wrought iron or chain-link, plus pool and amenity enclosures that see constant traffic during the school year. These are not ornamental residential gates. They’re workhorse systems that open and close dozens or hundreds of times a day, and they fail accordingly.
The climate pushes hard on that aging hardware, too. Subtropical Tampa Bay heat, heavy summer thunderstorms, and hurricane-season wind loads mean operator motors, hinges, and posts in University fail from humidity and storm damage far more than from cold. Salt-laden air from nearby Tampa Bay accelerates rust on ironwork, especially on older community gates that may have been installed before modern corrosion-resistant coatings were standard. We see the same pattern repeatedly: a motor that worked fine for years suddenly trips during a storm, or a hinge that quietly rusted through until a wind gust finished it.
August move-in week at USF is the hard deadline that most outsiders don’t understand. Hundreds of student tenants arrive with U-Hauls and gate codes that all need to work on day one. A community access gate or pool gate that goes down in late July is an emergency for the property manager, even if it looks like a routine repair on paper. That timing pressure is part of why University homeowners and property managers need a gate company that diagnoses fast and carries the right parts. We plan our University scheduling around that reality.
Styles & brands we work with
Our Main University Services
Most calls we take in University fall into two categories: a gate that will not open or close reliably, and an electric system that has stopped responding to remotes, keypads, or safety loops. Both need a gate-only specialist, and both are covered below.
Gate Repair in University
A gate off its track, a weld that has cracked, a hinge that has seized, or a post that has shifted in the sandy soil are all common in University. These are mechanical failures, and fixing them correctly means understanding how the gate’s weight, the operator, and the mounting hardware all interact. In University, we frequently see rust-thinned ironwork on older community gates and damage from storm debris that gets blown into chain-link and track systems. A generalist might replace a part and move on. We look at why it failed so the repair actually holds. If your gate is stuck, sagging, or dragging, see our Gate Repair in University page for full details.
Electric Gate Repair in University
Electric gate problems in University usually show up as a gate that stops responding to a remote, a keypad that works intermittently, or a safety loop that no longer detects a vehicle. These systems involve control boards, motors, sensors, and wiring, all of which suffer in humidity and storms. We diagnose the full system: motor, board, safety loop, and power supply, not just the most obvious symptom. When a USF-area property manager calls about an automatic gate that will not open during move-in week, we know the stakes. Read the full breakdown on our Electric Gate Repair in University page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in University
A new gate installation in University usually comes up for one of two reasons: an older community gate has reached the point where repair no longer makes financial sense, or a property owner is adding a gate to a property that never had one. The housing era matters here. Many of the 1970s and 80s complexes in the 33613 corridor are still running their original gates or have had piecemeal fixes over the decades. A full Gate Installation gives property managers a system sized correctly for their traffic, their current access-control needs, and the subtropical conditions that age gates quickly. We install both manual and automated systems, always matched to how the gate will actually be used.
Automatic Gate Installation
Signs you need it
Your existing manual gate gets left open because residents or tenants do not want to get out of their cars, or you need controlled access that a manual gate simply cannot provide.
What it costs in University
An automatic gate installation in University typically runs between $3,500 and $9,000, depending on operator type, gate size, and access-control components.
How we do it
We assess the gate opening and traffic pattern, recommend an operator matched to that duty cycle, install the motor and mounting hardware, then set up remotes, keypads, and safety loops with testing under loaded conditions.
Driveway Gate Installation
Signs you need it
You have a driveway that needs a physical barrier for privacy or security, and you want a gate that fits your existing entry without major grading or demolition.
What it costs in University
A single driveway gate installation in University typically runs $1,800 to $6,000 for a manual gate, or $3,500 to $9,000 when automated.
How we do it
We measure the opening, confirm post locations and soil conditions, hang the gate on properly set posts, and install the operator and safety equipment if the system is automated.
Sliding Gate Installation
Signs you need it
Your property has a wide opening or a slope that makes a swinging gate impractical, and you need a gate that slides parallel to your fence line.
What it costs in University
Sliding gate installation in University generally runs $1,800 to $6,000, with automated sliding systems starting around $3,500 and up.
How we do it
We set the track or cantilever system, install the gate frame and pickets, mount the drive system, and test the full slide cycle including limit switches and safety stops.
What Gate Installation Costs in University
| Item | Typical range in University |
|---|---|
| Manual gate installation | $1,800 – $6,000 |
| Electric gate installation | $3,500 – $9,000 |
| Automatic gate opener installation | $1,000 – $3,000 |
These numbers move based on gate width, operator type, whether you need a keypad and intercom, and how much rust or rot we find in the existing posts. Every University installation is quoted and agreed in writing before any work begins.
How long does a gate installation take in University?
Most University gate installations take one to two days once permits are clear and materials are on site. Custom gates or masonry work can push into three or four days, and we will give you a firm timeframe with your written estimate.
Do I need HOA approval for a gate installation in University?
Many University townhome and community properties require HOA or community development approval before a gate changes or goes in. We provide spec sheets and drawings that fit what management offices typically need, and we adjust our process to that timeline. Call (866) 976-0095 to talk through your community’s requirements before you commit.
Brands We Service in University
Most University gate systems run on LiftMaster, FAAC, BFT, or Mighty Mule equipment, and we carry parts and diagnostic familiarity with all of them. We also work on the full range of operators these communities have installed over the past few decades. See our brands page for the complete list. Because we stock common University parts locally, we can often complete a repair on the first visit instead of ordering and returning days later.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in University, FL
| Service | Typical range in University |
|---|---|
| Gate repair service | $150 – $750 |
| Electric gate repair | $150 – $750 |
| Gate opener repair | $150 – $750 |
| Automatic gate repair | $150 – $750 |
| Gate motor repair | $150 – $750 |
| Gate spring replacement | $150 – $750 |
| Manual gate installation | $1,800 – $6,000 |
| Electric gate installation | $3,500 – $9,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Automatic gate opener installation | $1,000 – $3,000 |
In University, the biggest price drivers are rust damage on older iron gates and the access-control complexity property managers need for community gates. The price we quote is the price you pay. We confirm the number before any work starts, and no work begins without your approval.
Neighborhoods We Serve in University
We work throughout the 33613 corridor, from the student housing directly around the USF Tampa campus to the established apartment complexes and rental duplexes south and west of Fletcher Avenue. If you manage a community gate or own a rental property with a gate anywhere in University, we service it.
- USF campus area
- Fletcher Avenue corridor
- Hidden Palms
- Bearss Avenue area
- Bruce B Downs corridor
Most University gate repairs can be scheduled within days, and we prioritize urgent community-gate failures during the August move-in window.
Service Area – Cities Near University
Tampa Gate Company also handles gate repair and installation for homeowners and property managers in Carrollwood, FL, Lake Magdalene, FL, Temple Terrace, FL, and Carrollwood Village, FL. If you live in any of these nearby communities and have a gate that needs work, you get the same gate-only focus and same straightforward service we bring to University.
Serving University, FL — Our Local Coverage Area
We’re based in the University area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in University
We prioritize community and amenity gate failures in University, especially during the weeks before USF move-in when hundreds of tenants need working gate codes. Most University property managers can get a scheduled visit within days, and we carry common parts locally so many repairs are completed the same day. Call (866) 976-0095 and tell us what the gate is doing.
In most University installations, the gate itself does not require a separate permit, but electrical work for automated systems sometimes triggers one depending on the existing wiring. We identify what applies to your property during the estimate and handle the paperwork that falls within our scope. We will tell you exactly what you need before we start.
Yes, and that is a large share of our work in the 33613 zip code. We quote community gates with full documentation, schedule around tenant move-in and move-out windows, and provide straightforward repair reports that management offices can file. Call (866) 976-0095 and we will set up a walkthrough of your community’s gates.
For gate repair, electric gate work, or a full installation in University, call Tampa Gate Company at (866) 976-0095 for a free estimate. We know these gates, we know this neighborhood, and we get them working again.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What University Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett