Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gandy, FL
Gate installation in Gandy, FL means working with salt air, shifting fill soil, and older welded-steel gates that have been through a few storms. Most of the gate work in the 33716 ZIP is on modest 1950s-to-1980s single-family lots and waterfront condo communities, where gates are as much about hurricane-hardened access as they are about curb appeal. We install, repair, and service both manual and electric gates here, and we quote every job before we touch a tool. Call (866) 976-0095 for a specialist who knows this bayfront ground.
Why Gandy Homes Are Different
Gandy sits on reclaimed marsh and tidal flat along Tampa Bay’s western shore, which means the soil under your gate is not the same as what you would find ten miles inland. Post holes fill with water after a heavy summer thunderstorm, and the sandy fill shifts enough to throw a gate out of square. We re-set footings in Gandy more often than we do in most Tampa neighborhoods, and we pour them deeper here because of the water table.
The housing mix adds another layer. Waterfront condos and townhomes tend to have shared access gates with electric operators that have been sweating in salt-laden air for years. Mobile and manufactured home communities run older chain-link and welded-steel security gates on low concrete pads that crack and tilt. The single-family homes scattered through the area, many from the 1950s through the 1980s, often have driveway gates on original hinges that have never been rehung.
Salt air is the quiet killer on Gandy gate jobs. It eats galvanized steel from the bottom up, corrodes operator enclosures, and seizes hinge pins. A gate that looks fine from the street can have a bottom rail so thin a boot goes through it. Our work here always starts with a corrosion check, not just a parts order.
Styles & brands we work with
Our Main Gandy Services
The two calls we get most from Gandy homeowners are a gate that will not open or close properly, and an electric gate that has stopped responding entirely. Both need a gate-only technician, not a handyman who works on gates a few times a month.
Gate Repair in Gandy
A sagging, rusted, or storm-shifted gate in Gandy usually means a footing problem as much as a hinge problem. We straighten or re-set posts, rehang the gate, and replace hinges, rollers, and latches that salt air has chewed through. If you have a chain-link or welded-steel gate that drags or will not latch, start here: Gate Repair in Gandy.
Electric Gate Repair in Gandy
Humidity and salt mist get into control boards, photo eyes, and keypads on Gandy’s condo and driveway gates. We diagnose the motor, board, safety loop, and operator wiring before we recommend anything. For a gate that opens by itself, hums without moving, or will not respond to the remote: Electric Gate Repair in Gandy.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gandy
New gate installation in Gandy is about building for what this ground and this air actually do. The right install starts with footings poured below the soft fill line and materials chosen for salt exposure, which is why powder-coated steel and properly galvanized hardware outlast the box-store stuff here. We install manual and automated driveway gates, sliding gates, and pedestrian gates for both private homes and small HOA or condo access points. If you are starting fresh or replacing a gate that has rotted past repair, our Gate Installation work in Gandy is built around the specifics of the 33716 lot.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has rusted through at the bottom rail, leans past the point of re-hanging, or no longer closes securely enough for kids, dogs, or privacy.
What it costs in Gandy
A new single driveway gate in Gandy typically runs $1,700 to $5,000 installed, depending on the material, width, and whether it includes an automated operator.
How we do it
We pull the old gate and posts, dig and pour new footings with proper drainage, set the posts plumb, hang the new gate, and adjust the hinges and latch until it swings square and seals closed.
Sliding Gate Installation
Signs you need it
You have a wide driveway, a short approach, or a steep grade where a swing gate would hang up on the slope or block part of the pull-in area.
What it costs in Gandy
Sliding gate installation in Gandy is typically $4,400 to $11,200, with the higher end reflecting longer spans, motorized operators, and heavier steel frames.
How we do it
We lay a level concrete track bed, position the steel frame and roller wheels, mount the gate panel, set the track guards, and dial in the end stops so it opens and closes without binding.
What Gate Installation Costs in Gandy
| Item | Typical range in Gandy |
|---|---|
| Single driveway gate (swing, manual) | $1,700 – $5,000 |
| Sliding gate (steel, manual or automated) | $4,400 – $11,200 |
| Electric/automated gate operator add-on | $3,000 – $5,400 |
Salt exposure, oversized spans, and access-control add-ons push a Gandy install toward the top of those ranges. We price the job before work starts, and nothing gets added to your invoice that was not on the written quote.
How long does a gate installation take in Gandy?
Most single driveway gate installations take two to three days once materials are on site: day one for demolition and footings, day two for setting posts and hanging the gate, and a final day for operator wiring and adjustments. Concrete cure time can add a day in wet weather.
Do you install gates on sandy fill soil in Gandy?
Yes, and this is exactly why footings matter here. We dig below the fill line and pour wider, deeper pads than a dry-ground install would need, so the gate does not shift or heave after the first summer of storms.
Brands We Service in Gandy
We work on the gate systems Gandy actually has: Mighty Mule, LiftMaster, FAAC, and BFT, plus the other major residential and commercial brands. Because gates are all we do, we keep control boards, remotes, photo eyes, and hinge kits for these systems on the truck, which cuts down the time between diagnosis and a working gate. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gandy, FL
| Service | Typical range in Gandy |
|---|---|
| Gate repair evaluation (half-day call-out) | $100 – $210 |
| Fence gate repair (materials + labor) | $195 – $330 |
| Electric gate control board repair/replacement | $220 – $1,650 |
| Electric gate opener repair | $285 – $1,585 |
| Gate opener installation | $3,000 – $5,400 |
| Automatic gate opener installation | $3,000 – $9,000 |
| Driveway gate installation | $1,700 – $5,000 |
| Sliding gate installation | $4,400 – $11,200 |
The two things that push a Gandy gate job toward the top of these ranges are salt corrosion (parts that have to be cut out and replaced rather than adjusted) and footing work on the reclaimed fill (deeper digs, more concrete, re-hanging after settling). Whatever the job is, we price it in writing before we start, and that price does not change unless you approve a change in the scope.
Neighborhoods We Serve in Gandy
We cover all of the 33716 ZIP in Gandy, from the condo clusters along the bayfront to the manufactured home communities set back from the water and the single-family streets between them. We are in and out of this area regularly, so a gate repair call typically gets scheduled within a day or two of your first call, often sooner for a gate that will not secure.
- Gandy waterfront condo and townhome communities
- Manufactured and mobile home communities along the Gandy corridor
- 1950s single-family lots near the bay
- 1980s subdivision streets in central and eastern Gandy
Service Area – Cities Near Gandy
Tampa Gate Company also runs gate repair and installation calls in the communities right next to Gandy. If you’re across the bridge or just north of the ZIP line, you’re still in our normal service area: Feather Sound, FL, Lealman, FL, West and East Lealman, FL, and Pinellas Park, FL all get the same gate-only technician and the same upfront pricing.
Serving Gandy, FL — Our Local Coverage Area
We’re based in the Gandy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gandy
Most Gandy calls are scheduled within one to two business days, and a gate that will not secure or a vehicle trapped inside usually gets bumped to the front of the route. The 33716 ZIP is a regular part of our service area, so we are not driving across town to reach you. Call (866) 976-0095 and we will give you a straight answer on when we can be there.
If you are in a condo or townhome community with shared access gates, your HOA or management company will typically need to approve the gate style, operator type, and sometimes the finish. On a private single-family lot in Gandy, a like-for-like gate replacement usually does not trigger a permit, but a new automated driveway gate can. We can tell you what your specific property needs when we come out for the measure.
Yes. Most of the gate repairs we do in Gandy are on gates installed by general contractors, fencing companies, or the previous homeowner, and the brand does not matter. We identify the hardware, source the matching parts, and repair what is there rather than pushing you toward a full replacement. Replacement is only the recommendation when the existing gate or operator is beyond a reliable repair.
If your gate is sagging, rusting, or refusing to open, call Tampa Gate Company at (866) 976-0095. We serve Gandy with gate-only technicians, upfront written pricing, and no pressure to replace what can be repaired.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gandy Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson