Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Seffner, FL
Gate installation in Seffner looks different than it does in most of Tampa. Properties here sit on larger lots with long driveways, so the standard job is a full-width sliding or double-swing steel gate on concrete and steel posts, not a decorative aluminum walkway gate. We’re Tampa Gate Company, a gate-only shop, and we’ve served Seffner since 2013. If you’re pricing a new driveway gate or replacing one that’s sagged past saving, call (866) 976-0095 for a free estimate.
Why Seffner Homes Are Different
Seffner is a low-density, semi-rural unincorporated Hillsborough County community. Most properties sit on larger lots with long driveways, private entry gates, and pasture or equipment gates rather than compact suburban yards. Along the US-301 corridor you’ll find mobile-home and RV-access communities where the gate has to open reliably for a motorhome at 6:00 a.m. and stay sealed against the afternoon storm. The housing stock is a mix of older ranch-style and manufactured homes on spacious lots, plus newer build-out and acreage properties with outbuildings, horse and equipment gates, and long fence lines. Many driveways are gated, and the gates themselves are typically heavier sliding or double-swing steel units rather than decorative aluminum. That changes the work: gates here are heavier, the posts are deeper, and the hardware is under constant stress from two forces Tampa doesn’t deal with quite the same way: sandy soil that shifts, and subtropical summer rain that washes out footings in a single storm. In Seffner, a leaning gate is rarely just a hinge issue. It’s a footing issue.
Afternoon summer downpours pool water around driveway gate posts in the flat, sandy lots. That water works its way down alongside the post, loosens the concrete, and the gate starts to lean. Sliding gates sag and start dragging. By the time you notice the latch not lining up, the post has usually moved enough that replacing hinges won’t fix it. Galvanized steel operators also rust out years sooner than homeowners expect here because of the humidity and the way moisture sits in low spots around the motor housing. When we spec a new gate in Seffner, we size the footings for that reality.
Styles & brands we work with
Our Main Seffner Services
When we get a call from Seffner, it’s usually one of two things: a gate that won’t open or close, or a gate that was never right from the start and the homeowner is finally ready to replace it. These two pages cover those jobs in detail.
Gate Repair in Seffner
Most repair calls in Seffner come down to the same handful of problems: sagging sliding gates, leaning swing gates from settled posts, seized hinges, and latches that no longer line up because the gate moved. Sandy soil and heavy summer rain are the common denominator. We repair gates on ranch homes, manufactured properties, and acreage lots throughout 33583 and 33584, and our repair-first approach means we’ll fix what’s fixable rather than pushing you into a new install. Gate Repair in Seffner covers costs, what we fix, and how quickly we can get out.
Electric Gate Repair in Seffner
An electric gate that won’t respond, beeps constantly, or stops mid-travel is a security problem, not an inconvenience. Seffner’s humidity is hard on control boards and motor housings, and lightning from afternoon storms finds its way into gate electronics more often than people expect. We diagnose the motor, the board, the safety loop, and the accessories as one system, and we work on LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Electric Gate Repair in Seffner explains what we check and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Seffner
Gate installation in Seffner means building for sandy soil, heavy rain, and a gate that’s probably heavier than average. Homes here skew toward acreage, ranch lots, and manufactured properties with long driveways, so the gate we install is usually a sliding or double-swing steel unit with enough structure to survive a decade of Florida storms. The most common failure we replace is a gate that was set with undersized posts and shallow footings, so by year three it was dragging or leaning. We size the job for clay-sand mix, pour deeper than code minimum where drainage is an issue, and use hardware built for the weight class of the gate, not the lightest thing on the shelf. If you’re replacing a gate or starting from scratch, call (866) 976-0095 and we’ll come out, measure, and give you a written price. Learn more about how we handle full projects on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand every day, or you installed a manual gate but now want keypad, intercom, or remote access for security and convenience.
What it costs in Seffner
Automatic gate installation in Seffner typically ranges from $2,800 to $9,000 depending on the operator, gate weight, and whether we’re running power to a new location.
How we do it
We set the gate and posts first, then mount the operator, wire the control board and safety devices, and program remotes, keypads, and any access-control components.
Driveway Gate Installation
Signs you need it
Your driveway is open to the road with no physical barrier, or the gate you have is undersized, rusted through, or no longer closes square after years of post movement.
What it costs in Seffner
Driveway gate installation in Seffner typically runs from $2,500 to $8,500 depending on gate width, steel versus aluminum, and whether it’s a slide or a swing configuration.
How we do it
We measure the opening and grade, dig and pour footings sized for the gate weight and sandy soil, then set the posts, hang the gate, and weld or bolt the hardware for level travel.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the road, your gates swing across the driveway and get blocked by parked cars, or you want a cantilever or V-track slider that won’t sag in soft ground.
What it costs in Seffner
Sliding gate installation in Seffner is priced per job, generally from $3,000 to $9,000 for a steel slider with proper footings and heavy-duty rollers.
How we do it
We set the track or cantilever posts on deeper concrete than a swing gate requires, hang the gate, balance the rollers, and adjust the travel so the gate opens fully without drifting.
What Gate Installation Costs in Seffner
| Item | Typical range in Seffner |
|---|---|
| Standard driveway gate, installed | $2,500 – $8,500 |
| Automatic gate system with operator | $2,800 – $9,000 |
| Sliding gate, steel, with footings | $3,000 – $9,000 |
How long does a gate installation take in Seffner?
Most driveway gate installations take one to two days once concrete has cured, which typically adds two to three days. We schedule the footing pour first, then return to set the gate and operator so nothing shifts before the concrete is ready.
Do I need a permit for a new gate in Seffner?
Many gate installations in unincorporated Hillsborough County don’t require a permit for the gate itself, but electric work and some driveway modifications may. We’ll tell you what’s needed for your specific property during the estimate, and we handle the parts that require a licensed contractor.
Brands We Service in Seffner
We work on Mighty Mule, LiftMaster, and FAAC systems regularly in Seffner, and we keep common parts for those brands stocked so we’re not waiting on a distributor. Most board and limit-switch failures on those three brands are diagnosed the same day. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Seffner, FL
| Service | Typical range in Seffner |
|---|---|
| Gate repair, general | $75 – $600 |
| Sagging or misaligned gate | $100 – $500 |
| Post replacement or re-setting | $300 – $1,200 |
| Electric gate repair | $100 – $2,500 |
| Operator or motor repair | $100 – $1,200 |
| Control board replacement | $150 – $500 |
| Safety sensor or loop repair | $100 – $700 |
| Gate installation, driveway | $2,500 – $8,500 |
| Automatic gate system | $2,800 – $9,000 |
| Sliding gate installation | $3,000 – $9,000 |
Seffner jobs run toward the upper end when post footings have washed out and need to be re-poured, or when a heavier steel gate means more time on the install and larger equipment. Every job is quoted and agreed before any work starts, so the number on your estimate is the number you pay.
Neighborhoods We Serve in Seffner
We cover all of Seffner including the US-301 corridor, the acreage east of Kingsway Road, and the neighborhoods around Mango Road and McIntosh Road. Most of our Seffner calls are within 20 to 30 minutes of the shop, and we schedule repair calls the same week in nearly every case.
- Seffner east of Kingsway Road
- US-301 corridor and RV communities
- The area around Mango Road
- McIntosh Road and surrounding acreage
- Properties near I-4 and County Line Road
Service Area – Cities Near Seffner
Tampa Gate Company serves Seffner plus the surrounding Hillsborough County communities. We regularly work in Brandon, FL, Mango, FL, Progress Village, FL, and Palm River-Clair Mel, FL. If you’re just outside Seffner, call and ask. Odds are we’re already working down the street.
Serving Seffner, FL — Our Local Coverage Area
We’re based in the Seffner area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Seffner
Most Seffner repair calls are scheduled within the same week. We’re based nearby in Tampa and the drive to most parts of 33583 and 33584 is short enough that a standard repair doesn’t need to be a full-day wait. Call us at (866) 976-0095 to get on the schedule.
Yes. We work on private driveway gates in HOA neighborhoods and on community entrance gates and RV-access gates along the 301 corridor. If the gate is owned by the community rather than the homeowner, we’ll coordinate with the property manager on access and approval.
Stop using it and call us. A leaning gate is usually a footing problem, and every cycle you put on it while it’s out of square adds stress to the hinges and the operator. We’ll inspect the posts, tell you whether it’s a re-set or a repair, and quote the work before we start.
For a free estimate on any gate repair or gate installation in Seffner, call Tampa Gate Company at (866) 976-0095. We’ll give you a straight answer and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Seffner Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang