Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pinellas Park, FL
Most gate work in Pinellas Park starts with the same call: a driveway gate that won’t open, or a new installation on a 1960s ranch that’s never had one. We handle both, and we’ve done it here long enough to know what this city throws at gates. The block-and-stucco homes, the sandy soil, the salt air off Tampa Bay – it all changes how a gate wears and what a repair or install actually needs. Tampa Gate Company has served Pinellas Park since 2013, and we work on the brands that show up most in this area: LiftMaster, FAAC, BFT, and Mighty Mule. Call (866) 976-0095 for a repair, a replacement, or a full new gate installation.
Why Pinellas Park Homes Are Different
Pinellas Park’s housing stock runs heavily to 1950s through 1970s single-story concrete-block ranch homes on small lots. Many of those properties sit behind privacy walls, chain-link, or decorative aluminum fencing, and the original driveway gates were often homeowner-built or installed decades ago. That means a gate repair call here is rarely a clean, modern pre-fab situation. We regularly open up gates that were welded to fit a specific opening in 1974, with posts set in soil that has shifted and settled for fifty years.
The bigger factor is the subtropical Gulf Coast climate. Intense UV breaks down powder coating and paint. Year-round humidity gets into control boards and keypads. Salt-laden air from Tampa Bay and the beaches rusts steel components, especially hinges, roller brackets, and the bottom rails of sliding gates. Summer thunderstorms bring a different problem: after a heavy squall, we see a spike in gates that bind or drag because the sandy soil under the posts washes out or settles. Older sliding gates in neighborhoods built before 1980 are particularly prone to rust-jammed rollers after a wet stretch. All of this means gate work in Pinellas Park is less about generic hardware and more about knowing how gates fail in this specific environment.
Styles & brands we work with
Our Main Pinellas Park Services
Two services dominate the calls we get from Pinellas Park homeowners and property managers: gate repair and electric gate repair. If you know which one matches your situation, jump straight to that page. If you’re not sure, read both – the difference usually comes down to whether the problem is mechanical or in the controls.
Gate Repair in Pinellas Park
A gate that sags, drags, won’t latch, or has come off its rollers is a mechanical repair. In Pinellas Park, we see a lot of welded steel driveway gates with rusted-through hinges and posts that have leaned out of plumb as the sandy soil shifted. We also repair stucco-clad pilasters that crack and let the hinge anchors loosen. If your gate binds after rain or scrapes the driveway, that’s the kind of repair we do constantly here. Full details and pricing are on our dedicated page: Gate Repair in Pinellas Park.
Electric Gate Repair in Pinellas Park
When the gate won’t move at all, or it opens a few inches and stops, or the keypad and remote stop responding, the issue is in the motor, the control board, or the safety loop. Pinellas Park’s humidity is hard on circuit boards, and the salt air corrodes limit switches and wiring connections faster than you’d expect. We diagnose electric and automated systems on the brands common to this area, including LiftMaster, FAAC, BFT, and Mighty Mule. If your opener is acting up, see the full breakdown here: Electric Gate Repair in Pinellas Park.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pinellas Park
Gate installation in Pinellas Park usually means one of two projects: adding an automatic gate to a driveway that’s never had one, or replacing a rusted-out manual gate with a new system that can handle this climate. Most of the homes here are 1950s to 1970s block-and-stucco ranches, and the original gates, where they exist, are often welded steel that’s been fighting salt air for decades. New installations in Pinellas Park need to account for sandy soil, intense UV exposure, and afternoon thunderstorms that arrive with little warning. We spec posts, operators, and hardware to hold up under those conditions rather than what works in a dry inland city. For the full scope of what we install, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand every time, or you have a manual gate and want keypad, remote, or intercom access.
What it costs in Pinellas Park
Automatic gate installation in Pinellas Park typically runs $4,500 to $11,900 depending on the operator, gate material, and site conditions.
How we do it
We assess the driveway layout and soil, mount the operator on a properly set post or pedestal, install the gate and hinges, wire the controls and safety loops, and program remotes and keypads before testing the full cycle.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your gate opening is wide, and a swing gate would either drag on the grade or block part of the drive when opening.
What it costs in Pinellas Park
Sliding gate installation in Pinellas Park generally falls between $3,700 and $10,800, with the higher end reflecting heavier steel gates and upgraded operators.
How we do it
We set a reinforced track or cantilever system on compacted base, hang the gate on proper rollers, mount the motor and rack, and wire safety loops and controls before cycling the gate several times to confirm alignment.
What Gate Installation Costs in Pinellas Park
| Item | Typical range in Pinellas Park |
|---|---|
| Manual gate installation | $897 – $2,900 |
| Automatic gate installation | $4,500 – $11,900 |
| Sliding gate installation | $3,700 – $10,800 |
Prices in Pinellas Park trend toward the middle of these ranges when the site is straightforward, but posts set in loose sandy soil, extra-wide driveways, and power runs from the house to the gate all add cost. Those variables get identified during the estimate, never after the work starts. Every quote is written and agreed before we begin.
How long does gate installation take in Pinellas Park?
Most residential gate installations in Pinellas Park take one to two days once the gate and operator arrive. Larger custom gates or jobs needing significant post work can run longer. We give you a written schedule at quote time, and we hold to it.
Do you handle the power run and the safety edges?
Yes, we run the power to the operator, install safety loops and photo eyes, and set up keypads and remotes as part of the installation. You won’t need to coordinate a second contractor. Call (866) 976-0095 and we’ll walk through what your site needs.
Brands We Service in Pinellas Park
We work on LiftMaster, FAAC, BFT, and Mighty Mule systems regularly in Pinellas Park, among others, and we keep common replacement parts for those brands on our trucks. That saves a second trip on most repairs. If your operator is a brand we haven’t named here, call us anyway – see our brands page for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pinellas Park, FL
| Service | Typical range in Pinellas Park |
|---|---|
| Gate repair (minor, no parts) | $150 – $375 |
| Gate repair (major, with parts) | $475 – $1,350 |
| Electric gate repair | $240 – $780 |
| Gate opener repair (parts and labor) | $350 – $950 |
| Manual gate installation | $897 – $2,900 |
| Automatic gate installation | $4,500 – $11,900 |
| Sliding gate installation | $3,700 – $10,800 |
| Gate replacement | $1,650 – $7,300 |
Two things push prices toward the upper end in Pinellas Park: the sandy soil, which often means deeper post footings or additional concrete, and corrosion on older gates that turns a simple bracket replacement into a bigger job once we open it up. Whatever the number, you’ll see it in writing before any work starts. We quote the price, you approve it, then we do the work – no surprises on the invoice.
Neighborhoods We Serve in Pinellas Park
We cover all of Pinellas Park across the 33780, 33781, and 33782 ZIP codes. Most of the residential calls come from the post-war ranch neighborhoods between Park Boulevard and 62nd Avenue, the subdivisions east of US 19, and the quieter streets south of Bryan Dairy Road. We also handle industrial and commercial gates on properties along the US 19 corridor.
- Mainlands of Pinellas Park
- Autumn Run
- Skyview Terrace
- Pinellas Farms
- Park Boulevard corridor
We can usually route a technician to a Pinellas Park address within one business day, and we do offer emergency callouts when a gate is stuck open or blocking access.
Service Area – Cities Near Pinellas Park
Our service area extends to the communities around Pinellas Park, including South Highpoint, FL, Feather Sound, FL, Kenneth City, FL, and Lealman, FL. If you’re just across the Pinellas Park line, we’ll come out the same way we would for a home here. Call (866) 976-0095 and we’ll confirm coverage for your address.
Serving Pinellas Park, FL — Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pinellas Park
Most non-emergency repairs in Pinellas Park are scheduled within one business day. If your gate is stuck open or blocking the driveway, call (866) 976-0095 and we’ll treat it as a priority. We do not leave a gate unsecured overnight if we can avoid it.
Repairs and like-for-like replacements generally don’t need a permit in Pinellas Park. New installations or changes to the gate’s size, height, or automation can trigger permit or HOA review depending on your neighborhood. We’ll tell you at the estimate what applies to your property, and we can handle the paperwork if a permit is required.
Yes. We service single-family driveway gates, HOA entry gates, and commercial or industrial gates along major corridors in Pinellas Park. The equipment differs, but the approach is the same: diagnose the actual failure, quote the fix, and do the work right the first time.
If your gate is sagging, stuck, or dead in Pinellas Park, call Tampa Gate Company at (866) 976-0095 for a free estimate. We know this city’s gates, this soil, and these brands, and we’ll give you a straight answer and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinellas Park Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett