Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redington Shores, FL
Gate installation and repair in Redington Shores is different from inland Florida work. Nearly every gate here sits within a few hundred feet of the Gulf of Mexico, which means salt-laden air and storm-driven spray attack hinges, operators, and fasteners year-round. A driveway gate that looks fine from the street is often corroding internally. We focus on gate systems specifically, so we know which materials and operators hold up on a barrier island and which ones fail early. If you’re dealing with a gate that won’t close, a rusty operator, or planning a new installation, call (866) 976-0095 and we’ll give you a straight answer.
Why Redington Shores Homes Are Different
Redington Shores is a narrow barrier-island town where most homes are mid-century beach bungalows, 1970s – 90s single-story builds, and stilted or raised coastal houses on small beachside lots. Many properties in the 33776 ZIP code were rebuilt or elevated after past storms, and their gate systems run the full range: original aluminum frames, vinyl gates that have gone brittle in the sun, and wrought-iron entry gates with decades of salt exposure.
The work here is fundamentally a corrosion and wind-load problem. The subtropical Gulf climate brings intense UV, high humidity, summer thunderstorms, and hurricane season from June through November. Salt film accumulates on gate hardware even when there’s no storm in sight. On beach-side streets, we regularly replace seized stainless-steel hinges and failed low-voltage control boards after heavy salt-spray blows. Older gates along the Gulf front often need full hardware replacement rather than adjustment because the corrosion has reached the fasteners inside the frame. Wind-load requirements also push heavier, more securely anchored hardware than you’d spec for an inland neighborhood.
What that means for a Redington Shores homeowner: a gate that would last 15 years three miles inland can fail in 8 years here. Choosing the right metal, coating, and operator from the start is the difference between a gate that holds up and one that gets replaced twice.
Styles & brands we work with
Our Main Redington Shores Services
Most calls from Redington Shores fall into two categories: a gate that’s physically damaged or seized, and an electric operator that’s stopped responding. We handle both, with dedicated pages for each.
Gate Repair in Redington Shores
Hinges, posts, frames, latch hardware, and sagging gates are the common repair jobs in Redington Shores. The salt air works on every moving part, and gates that get used daily will eventually bind or drop. We repair first, which means we’ll tell you honestly if a hinge replacement or post reset solves the problem, rather than pushing a full replacement. For the full breakdown of what gate repair involves on a barrier island, see Gate Repair in Redington Shores.
Electric Gate Repair in Redington Shores
Electric gate systems fail differently near the water. Control boards corrode, safety loops short, and low-voltage connections develop resistance. We diagnose the full system – motor, board, safety sensors, and access-control components – not just the most visible part. For automated swing and slide gates, see Electric Gate Repair in Redington Shores for the specifics on motorized gate repair in this area.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redington Shores
New gate installation in Redington Shores is about getting the right system for saltwater exposure and wind load, not just hanging a gate that looks good on day one. The housing stock here – mid-century bungalows and elevated coastal homes on narrow lots – means almost every install is a custom or semi-custom job. We quote the full scope upfront and walk you through material and operator choices before any work starts. For a deeper look at the full range of projects we take on, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening the gate by hand every time because there’s no operator installed, or the existing one is beyond reasonable repair.
What it costs in Redington Shores
Automatic gate installation in Redington Shores typically runs from $2,200 to $8,500 depending on gate size, operator type, and whether new posts and wiring are required.
How we do it
We measure the gate and opening, confirm the wind-load requirement, select a corrosion-rated operator, set posts if needed, mount and wire the motor, install safety loops or photo eyes, and test the full cycle.
Driveway Gate Installation
Signs you need it
You have no driveway gate and want one for security or privacy, or the current one is rusted through and unsafe.
What it costs in Redington Shores
Driveway gate installation in Redington Shores generally ranges from $2,000 to $6,000 for a single swing gate with hardware, excluding operator and concrete work.
How we do it
We check the existing driveway surface and clearances, help you choose a material that survives the salt air, set and anchor posts, hang the gate, and install latching and locking hardware.
Electric Gate Installation
Signs you need it
You want keypad, intercom, or remote access on a gate that currently opens manually, or you’re replacing a system that’s too small for the gate’s weight and wind exposure.
What it costs in Redington Shores
Electric gate installation in Redington Shores typically costs $3,000 to $10,500 including operator, control board, safety equipment, and access controls.
How we do it
We specify an operator rated for the gate’s weight and cycle frequency, run low-voltage wiring, mount the operator and control board, install safety sensors, and program remotes and keypads.
Sliding Gate Installation
Signs you need it
Your lot is too narrow or your driveway too short for a swing gate, or you need a gate that opens along the fence line instead of into the property.
What it costs in Redington Shores
Sliding gate installation in Redington Shores usually falls between $2,800 and $8,000 depending on track or cantilever system, gate length, and operator.
How we do it
We measure the run distance, choose between track and cantilever hardware, set the base and support posts, hang the gate, install the operator and rack, and tune the closing force and speed.
What Gate Installation Costs in Redington Shores
| Item | Typical range in Redington Shores |
|---|---|
| Driveway gate with hardware (no operator) | $2,000 – $6,000 |
| Automatic gate system with operator | $2,200 – $8,500 |
| Electric gate with access controls and safety equipment | $3,000 – $10,500 |
How long does gate installation take in Redington Shores?
Most residential gate installations take one to three days once materials are on site. Custom gates ordered to size add one to three weeks for fabrication before install.
Do I need HOA approval for a gate in Redington Shores?
Some Redington Shores communities have design review requirements for visible gates and fencing. We recommend checking your HOA rules before selecting a style, and we can adjust the plan to the approved spec.
Call (866) 976-0095 for a free estimate on gate installation in Redington Shores.
Brands We Service in Redington Shores
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, along with other major gate brands. That means faster diagnosis and the right parts on the truck. In Redington Shores, we regularly replace corroded control boards and seized hardware on these systems, and we keep common service parts on hand for faster turnaround. See our brands for the full coverage list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redington Shores, FL
| Service | Typical range in Redington Shores |
|---|---|
| Gate repair – hinge replacement | $150 – $450 |
| Gate repair – post reset or replacement | $400 – $1,200 |
| Gate repair – weld repair (wrought iron or steel) | $150 – $500 |
| Gate repair – sagging gate correction | $200 – $600 |
| Electric gate repair – control board replacement | $350 – $1,100 |
| Electric gate repair – operator motor replacement | $500 – $1,600 |
| Automatic gate installation | $2,200 – $8,500 |
| Driveway gate installation | $2,000 – $6,000 |
| Electric gate installation | $3,000 – $10,500 |
| Sliding gate installation | $2,800 – $8,000 |
In Redington Shores, two things push prices higher than inland averages: salt-corrosion damage that requires full hardware replacement instead of adjustment, and wind-load requirements that call for heavier posts and anchors. We quote the price before any work starts, so you know the real cost before we turn a wrench.
Neighborhoods We Serve in Redington Shores
We work throughout Redington Shores and the 33776 ZIP code, from the beach side of Gulf Boulevard to the bayside streets. Service hours cover both coasts of the town, and we typically reach most calls in the area same day or next day depending on the season.
- Gulf Boulevard beachfront
- Bayside streets along Boca Ciega Bay
- The Redington Shores Yacht & Tennis Club area
- Residential streets east of Gulf Boulevard
- Homes near the Redington Shores Town Hall corridor
Service Area – Cities Near Redington Shores
Our gate crews also run to the surrounding beach and mainland communities. If you’re in Indian Shores, FL, Seminole, FL, Indian Rocks Beach, FL, or Ridgecrest, FL, the same specialist team covers your gate system with the same repair-first approach.
Serving Redington Shores, FL — Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redington Shores
Most Redington Shores calls are reached the same day or next day. A gate that won’t close is a security problem, so we prioritize those. Call (866) 976-0095 and describe what the gate is doing, and we’ll tell you when we can be there.
Permit requirements vary by project scope. A simple hinge or operator swap usually doesn’t need one. A new gate installation with posts and concrete may. We can guide you on what the town typically requires and what your HOA may also need to approve.
Yes. We serve the entire town, from Gulf-front homes with the heaviest salt exposure to bayside properties where the corrosion is milder but wind loads still matter. The spec for hardware and operators changes depending on which side of the island you’re on.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redington Shores Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett