Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Inverness, FL
Gate installation in Inverness means planning for hurricane wind load, sandy soil, and long driveway setbacks rather than dropping a pre-fab kit onto a suburban lot. We’re Tampa Gate Company, and we’ve served Inverness since 2013 as a gate-only specialist. From a Mighty Mule opener on a pasture gate off Highway 44 to a full automated sliding gate for a lakefront lot near the Tsala Apopka chain, we diagnose and build systems made for this specific climate. Call (866) 976-0095 for a free estimate on any gate project.
Why Inverness Homes Are Different
Inverness isn’t a dense subdivision market. It’s Citrus County’s seat, surrounded by the Tsala Apopka lake chain, and the housing tells that story. You see mid-century and 1970s-80s single-family homes mixed with manufactured homes on acreage, lakefront properties with private drives, and rural parcels where the gate sits 200 feet or more from the road. That changes the work in three ways.
First, the soil. Sandy, high-water-table ground near the lakes means gate posts need deeper footings and more concrete than a standard kit calls for. A post that’s stable in Tampa clay can lean within a year here if it isn’t set past the water table. Second, the humidity. We regularly open operator boxes on Inverness gates to find corrosion on terminals and board connections from months of damp, subtropical air – especially on lakefront properties in the 34450 and 34453 ZIP codes where morning fog lingers. Third, hurricane season. Inverness gates take real wind loading, and after a storm the most common calls we get are sagging swing gates, hinge bolts that snapped, and operators fried by water intrusion or debris strikes.
Most Inverness gate work is on swing and slide gates at the end of long driveways, plus a steady share of dock and lanai enclosure gates. That’s our home turf.
Styles & brands we work with
Our Main Inverness Services
Two calls dominate our Inverness work: manual gate hardware that’s rusted, sagged, or come off its post, and electric gate systems whose motors, boards, or safety loops have stopped responding. Here’s what each looks like here.
Gate Repair in Inverness
A gate that scrapes the ground, won’t latch, or leans hard after a storm is a repair job, and Inverness gives us plenty of those. We rebuild hinge points on aging steel and aluminum gates, straighten or reinforce posts that have shifted in lake-country soil, and replace rusted track wheels on sliding gates. Because we work on gates exclusively, we carry the common Inverness failure parts on the truck – hinge kits, roller assemblies, latch hardware – so most repair calls finish in one visit. For full details and pricing, see our Gate Repair in Inverness page.
Electric Gate Repair in Inverness
When an automated gate stops mid-travel, opens only intermittently, or ignores the remote after a thunderstorm, the problem is usually in the motor, control board, or safety loop – not the gate itself. We test the full system on Inverness callouts: transformer output, board diagnostics, loop detector sensitivity, photo-eye alignment. Humidity-driven corrosion on LiftMaster and FAAC boards is common here. For specifics on our diagnostic process and repair pricing, see our Electric Gate Repair in Inverness page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Inverness
New gate installation in Inverness typically runs $2,800 to $11,500 depending on material, automation, and site conditions, and the biggest variable here is what’s under the post. Most Inverness properties date from an era when driveway gates were simple and manual, so a modern install usually means upgrading posts, adding a stronger frame, and running power where none exists. We quote every job after a site visit and put the number in writing before any work starts. Our Gate Installation service covers the full build from footing to final access-control setup.
Automatic Gate Installation
Signs you need it
You’re getting out of the car every time you reach your driveway, or you want to secure a rural Inverness property without fencing the whole perimeter.
What it costs in Inverness
Automatic gate installation in Inverness typically runs $4,700 to $11,500, with the operator choice and power run distance moving the number most.
How we do it
We set the posts deep enough for sandy high-water-table soil, hang the gate, then install the operator, safety loops, and keypad – testing full open/close cycles under load before we leave.
Driveway Gate Installation
Signs you need it
You’ve got a long pull off Highway 41 or a side road and want a physical barrier that reads as private property.
What it costs in Inverness
Driveway gate installation in Inverness typically runs $2,800 to $9,800 depending on whether you choose a single swing panel or a wider sliding gate.
How we do it
We measure the driveway width and setback, spec the gate for storm-wind bracing, and anchor posts below the local water table so the gate stays square through wet and dry seasons.
What Gate Installation Costs in Inverness
| Item | Typical range in Inverness |
|---|---|
| Manual driveway gate (single swing) | $2,800 – $5,400 |
| Automatic gate system with operator | $4,700 – $8,900 |
| Large automatic sliding gate | $6,500 – $11,500 |
Can you install a gate on a sandy lakefront lot in Inverness?
Yes. The fix is in the footing: we auger deeper than standard, often 36 to 48 inches, and use larger diameter concrete forms on lots near the Tsala Apopka chain to keep posts from shifting. Call (866) 976-0095 for a site evaluation.
How long does gate installation take in Inverness?
Most manual gate installs finish in one day. Automated systems run two to three days once posts, operator, and power are all in place – a little longer after heavy rain softens the ground. We schedule around your access needs.
Brands We Service in Inverness
We work on Mighty Mule, LiftMaster, and FAAC systems specifically, and carry common board, loop detector, and remote parts for those lines in our Tampa stock. That cuts turnaround on Inverness repair calls to days, not weeks. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Inverness, FL
| Service | Typical range in Inverness |
|---|---|
| Gate repair labor (per visit) | $125 – $210 |
| Electric gate diagnostic | $85 – $160 |
| Control board replacement | $420 – $1,300 |
| Hinge replacement – steel gate | $185 – $380 |
| Track wheel / roller replacement | $150 – $340 |
| Manual gate installation | $2,800 – $5,400 |
| Automatic gate installation | $4,700 – $8,900 |
| Sliding gate installation | $6,500 – $11,500 |
What pushes an Inverness quote higher than another market: power runs down long driveways, deeper post footings in lake-country sand, and hurricane-rated bracing or hardware. Whatever the number, you’ll see it in writing and approve it before we start – no post-work surprises.
Neighborhoods We Serve in Inverness
We cover all of Inverness and the surrounding Citrus County communities in the 34450, 34451, 34452, and 34453 ZIP codes. Most neighborhoods see us same-week, and emergency repair calls on a failed security gate get prioritized.
- Inverness Highlands South
- Inverness Highlands North
- Downtown Inverness
- Lake Tsala Apopka lakefront
- Floral City / rural routes
Service Area – Cities Near Inverness
We run calls from Inverness down toward Inverness Highlands South, FL and Inverness Highlands North, FL, and across the county line to Hernando, FL and Floral City, FL. If your gate sits on an acreage lot or rural drive anywhere around the Tsala Apopka chain, we cover it.
Serving Inverness, FL — Our Local Coverage Area
We’re based in the Inverness area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Inverness
Most Inverness properties see us same-week for scheduled work, and we prioritize emergency calls where the gate is stuck open or won’t secure a property. Call (866) 976-0095 and describe the failure – we’ll tell you honestly if it’s a same-day dispatch or a next-day slot.
Most residential driveway gates on private property don’t require a permit in unincorporated Citrus County, but automated systems near road rights-of-way and some HOA-governed subdivisions have their own requirements. We check local compliance on every quote and flag anything you’ll need approved before we start.
Yes. A large share of our Inverness work is on rural and manufactured-home lots with long gravel or dirt drives. We’re comfortable working without paved access and spec posts and operators for the sandy, humid conditions those properties present year-round.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inverness Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang