Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Dade City North, FL | Tampa Gate Company
Ghost Controls gate repair in Dade City North usually comes down to the arm fighting a gate that no longer sits square, not a dead motor. We provide Ghost Controls in Dade City and independent service across Dade City North, and the difference here is that we’re working on wide ranch and pasture gates built for trucks, trailers, and livestock, not the short subdivision driveway gates most technicians expect to see. If your Ghost Controls operator is stalling, binding, or tripping mid-travel, call Tampa Gate Company at (866) 976-0095. We work on Ghost Controls swing arms, slide operators, solar kits, and control boards specifically. We are an independent service company and are not authorized, sponsored, or endorsed by Ghost Controls.
Why Dade City North Residents Choose Us for Ghost Controls Service
Most gate repair calls in Dade City North don’t start with the operator at all. They start with a post that heaved out of sandy soil, a hinge pin that seized after a wet summer, or a gate leaf that a horse has been using as a scratching post for six months. The Ghost Controls arm is usually the victim, not the culprit. That’s the first thing we check, and it’s why our diagnostics in Dade City North look different from what a generalist would run.
Noel Carver, our owner, grew up in Seminole Heights and has spent nearly three decades working with his hands around the Tampa Bay area. He picked up the fundamentals of electrical systems and mechanical repair at Hillsborough Community College before narrowing his focus entirely to gate systems. These days he’s the guy neighbors call when an operator burns out at midnight or a post gets clipped and nobody can get in or out. That kind of focus means when we show up in Dade City North, we’re not guessing. We recognize a Ghost Controls TDS dual-swing arm on sight, we know what the limit magnets look like when they’ve been knocked out of range, and we know what a sun-baked solar charge controller does after three Florida summers.
We handle Ghost Controls sales & service as an independent provider. That means we repair first. Replacement is only the recommendation when repair genuinely isn’t the right answer.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Dade City North
These are the failures we see repeatedly on Ghost Controls systems across Dade City North, and each one is tied to what this area does to gate hardware:
- Out-of-plumb swing gates from post heave. Sandy ranch-soil footings set shallow in the dry season lean after a wet summer, so the arm fights a binding gate and trips obstruction sensing mid-travel. We pull the post, set it in concrete at proper depth, re-square the leaves, and re-sweep the arm limits so the operator isn’t working against itself.
- Livestock lean and push damage. Horses and cattle rubbing and shoving wide tube and pipe pasture gates bend Ghost Controls arms, strip hinge hardware, and knock limit magnets out of range on swing kits. We straighten or replace arms, rebuild hinge points with heavier hardware where the gate width calls for it, and re-align the travel limits so the operator opens fully and closes fully every time.
- Lightning and storm-surge board failure. Dade City North’s intense summer thunderstorm pattern fries low-voltage Ghost Controls control boards and solar charge controllers, often with no visible burn mark. A board that worked yesterday and won’t respond today after an afternoon storm is a familiar call for us. We diagnose the board, confirm whether the surge took out anything downstream, and replace with genuine Ghost Controls boards where the OEM part is what keeps the operator reliable.
- Rust and corrosion at hinge pivots, arm brackets, and battery terminals. Year-round humidity and driving rain mean the operator ‘dies’ while the gate leaf and hinges are the real drag. We free seized hardware, replace corroded brackets and terminals, and get the arm moving a gate that actually swings freely again.
- Solar and battery-backup failures on gates far from the house. Many Dade City North gates sit a long way from any structure, so Ghost Controls solar-charged battery-backup packages are common. We test the panel output, the charge controller, and the battery bank, then replace what’s failed rather than selling a whole new kit. A gate that almost works is a gate that doesn’t work.
Ghost Controls Service in Dade City North: What Local Conditions Mean for Your Equipment
The single biggest thing that separates Ghost Controls repair in Ridge Manor and Dade City North from the same work in Tampa or Wesley Chapel is the gates themselves. This is ranch and equestrian country off US-301 and SR-52, not subdivision country. The gates we service here are wide tube, pipe, and farm-style pasture and lane entries sized for trucks, trailers, and livestock, so Ghost Controls arms are working far heavier and wider leaves than the short residential driveway gates those same operators were specced for in denser suburbs. That extra width and weight means hinge drag and post movement show up as operator faults long before the motor itself gives out. On a ranch parcel off US-301 north of town, a customer’s double pasture gate on a Ghost Controls dual-swing kit had quit opening, and the arm would run a few inches and stall. Our tech found the roadside post had heaved after the wet season and one hinge pin was seized, so the operator was fighting a gate that no longer sat square. We pulled and re-set the post in concrete, freed and replaced the hinge hardware, re-squared the leaves, and re-swept the arm limits. That Ghost Controls kit has run clean through the following storm season. If you’re running a Ghost Controls operator on a wide pasture gate in Dade City North, the arm is doing more work than it would on a standard driveway, which means the post and hinge condition matters more, not less.
Ghost Controls Models & Products We Service in Dade City North
We work on Ghost Controls Heavy-Duty Single Swing (AXS) arm kits, Dual Swing (TDS) arm kits for double driveway and pasture gates, the Tube Sliding Gate (TSG) operator, and solar-charged battery-backup operator packages with keypad and remote. On the parts side, we use genuine Ghost Controls boards, arms, limit hardware, and battery kits where the OEM part is what keeps the operator reliable, and quality aftermarket hinges, keypads, and solar controllers where they meet or beat OEM durability. We’ll tell you honestly when a post reset and hinge rebuild will save a working operator, and when a board or arm is genuinely at end of life. No upsell pressure. Just what the gate actually needs.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Dade City North
Ghost Controls service in Dade City North typically lands in these ranges, depending on what we find when we diagnose the system:
- Service call and diagnosis: $75 – $125, credited toward the repair if you proceed
- Limit switch re-alignment or adjustment: $85 – $160
- Hinge replacement (single gate leaf): $120 – $240
- Post reset in concrete (single post, includes re-square and rehang): $250 – $500
- Ghost Controls control board replacement (AXS or TDS): $180 – $350
- Solar charge controller replacement: $120 – $250
- Battery replacement for backup systems: $80 – $200
- Full arm replacement (swing kit): $300 – $600, parts and labor
Every price is quoted and agreed before any work starts. You’ll know the number before we turn a wrench, not after. A free estimate includes the site visit, a full system check, and a written quote for what needs doing. Call (866) 976-0095 for an exact quote, estimates are free.
Serving Dade City North, FL — Our Local Coverage Area
We’re based in the Dade City North area and know this community well, and we also handle Ghost Controls in Saint Leo. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Dade City North
My Ghost Controls swing gate opens partway on a Dade City North ranch driveway and then stops – is the motor bad?
Usually not. In Dade City North, a gate that opens partway and stalls is most often fighting a post that has heaved out of sandy soil or a hinge that has seized after a wet summer. The operator trips its obstruction sensing because the load is too high, not because the motor failed. We check the gate geometry first, then the arm, then the board. Call (866) 976-0095 if yours is doing this, we’ll find the real cause.
Will livestock damage my Ghost Controls pasture gate operator?
Yes, and it happens constantly on ranch parcels around Dade City North. Horses and cattle lean on gates, shove them, and rub against them. That bends Ghost Controls arms, strips hinge hardware, and knocks limit magnets out of range. The fix is usually mechanical, not electronic: re-align the gate, replace worn hardware, and reset the operator’s travel. We handle livestock-damaged Ghost Controls systems regularly.
Why do so many Ghost Controls boards fail after Dade City North thunderstorms?
Lightning and storm-surge spikes ride the low-voltage wiring that feeds your Ghost Controls control board and solar charge controller. Dade City North gets intense afternoon thunderstorms all summer, and a nearby strike doesn’t need to hit your gate directly to send a surge through the system. Boards often fail with no visible burn mark. We replace them with genuine Ghost Controls boards and check the surge path so the next one doesn’t take the replacement out too. Call (866) 976-0095 for a board diagnosis.
Do you service Ghost Controls solar and battery-backup setups on gates far from the house?
We do. A lot of Dade City North gates sit far from any structure, so solar-charged Ghost Controls packages are common out here. We test panel output, charge controller function, and battery capacity, then replace only what has failed. If your gate is dead and the panel looks fine, the batteries are usually the first suspect.
Can you reset a gate post that has heaved, or do I need a whole new gate?
You can absolutely reset a heaved post, and in Dade City North it’s one of the most common repairs we do. Sandy soil and seasonal downpours mean posts set shallow in the dry season lean after a wet summer. We pull the post, set it in concrete at proper depth, re-square the gate, and re-align the operator. Most of the time the gate itself is fine. Call (866) 976-0095 for a post reset quote, estimates are free.
Service Areas Near Dade City North
We run Ghost Controls service calls throughout the rural east Pasco corridor and into neighboring communities. If you’re in Tampa, Palm River-Clair Mel, East Lake-Orient Park, Egypt Lake-Leto, Progress Village, or Carrollwood, we cover those areas too. See our Dade City North service area page for full coverage details. We also provide dedicated Ghost Controls service in South Bradenton and Ghost Controls service in Heritage Pines for clients in those communities.
Book Your Ghost Controls Service in Dade City North Today
If your Ghost Controls gate is binding, stalling, or dead after a storm, call (866) 976-0095. We diagnose the whole system, quote the repair before we start, and get your gate back to secure, working order. Serving all of Dade City North and the surrounding ranch properties off US-301 and SR-52, plus Ghost Controls repair in Lacoochee.
Written by Noel Carver, Owner at Tampa Gate Company, serving Dade City North and the greater Tampa Bay area for nearly three decades.