Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Longboat Key, FL
Gate installation in Longboat Key has to solve a problem most Florida barrier islands don’t face at this intensity: salt. Every hinge, track, roller, and motor housing on this island gets hit with salt-laden gulf wind year-round, and the housing stock – mostly 1970s-to-2000s waterfront estates and mid-rise condos – still carries a lot of original galvanized steel that pits and seizes years before its mainland equivalent would. We install gates built for that environment, and we repair the ones already fighting it. Call (866) 976-0095 for a free estimate on any gate job in Longboat Key.
Why Longboat Key Homes Are Different
Longboat Key runs narrow between Sarasota Bay and the Gulf of Mexico, which means almost every property sits within a quarter mile of salt water on at least one side. That changes gate work in ways that are easy to miss until a hinge snaps or a motor burns out. Galvanized hardware on original 1980s and 1990s gates pits and seizes faster here than five miles inland in Bradenton. Aluminum holds up better but still needs stainless fasteners, because a stainless bolt in an aluminum post lasts, while a zinc bolt turns to dust in two hurricane seasons.
The building stock matters too. Longboat Key is not a neighborhood of standard residential track homes. It is luxury waterfront estates with custom ornamental gates, and mid-to-high-rise condominiums with community entry gates on private drives. Many of these gates were custom-fabricated decades ago, so a replacement hinge or roller cannot be grabbed off a shelf at a big-box store. It has to be matched, sometimes machined, and installed with the right isolation washers so dissimilar metals don’t corrode on contact. The barrier-island code also requires wind-rated operators and impact-rated gate leaves, which most off-island gate companies are not stocked to service at all. We carry and install hardware that meets that code instead of making the customer chase it.
And after a tropical storm, the most common gate failure on Longboat Key is not water in the motor. It is fine beach sand blasted into the gearbox and photo-eye sensors. A routine post-storm call here is a full teardown and re-grease, not a reset. Companies that just clear the error code and leave will be back out in a month. We pull the cover, clean the gears, repack the grease, and re-aim the sensors – because on this island, that is the repair.
Styles & brands we work with
Our Main Longboat Key Services
Longboat Key homeowners and property managers call us most often for two things: a gate that won’t open or close, and a motorized system that has stopped responding to its remotes, keypad, or safety loop. Here is what each involves here.
Gate Repair in Longboat Key
A sagging or seized gate in Longboat Key is rarely just a hinge. Salt has usually gotten into the roller bearings, the track, or the post mounts, and tightening one bolt may leave three others about to fail. We inspect the whole swing or slide path, replace what is pitted or seized, and re-align the gate so it moves cleanly instead of dragging. Many of the original galvanized gates on 1980s and 1990s Longboat Key homes are worth repairing, not replacing – the leaf is still sound, but the hardware around it is shot. Read more about Gate Repair in Longboat Key.
Electric Gate Repair in Longboat Key
When an automated gate on Longboat Key stops responding, the problem is usually one of three things: a corroded terminal on the control board, a sand-fouled photo-eye sensor, or a gearbox full of salt-affected grease. We diagnose the motor, board, and safety loop as one system, not as separate parts, because a board fault often follows a motor drawing too much current. Read more about Electric Gate Repair in Longboat Key.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Longboat Key
New gate installation in Longboat Key is a different job than anywhere else because the island code and the salt environment dictate materials before the first post hole is even dug. A galvanized steel gate that would be fine inland will start pitting at the welds within two seasons here, so we quote and install aluminum, stainless, or properly powder-coated steel with stainless fasteners and a wind-rated operator from the start. The Gate Installation work we do here covers custom estate gates, condo entry gates, and driveway gates built to match the look of the property while actually surviving the gulf air.
Automatic Gate Installation
Signs you need it
You’re getting out of your car at the entry gate for every delivery or visitor, or the existing operator is so corroded it fails more weeks than it runs.
What it costs in Longboat Key
Automatic gate installation in Longboat Key typically ranges from $2,200 to $400 for more basic setups to $4,500 for full systems with two openers and safety devices, depending on gate width and power access.
How we do it
We set the operator and gate posts, run the power and safety loops, mount the opener and any keypad or intercom, then program and test the full open-close cycle including obstruction reversal.
Note: I noticed a likely typo in the source figure above ($2,200 to $400) – the page will read better if you confirm the intended range. I am flagging rather than silently inventing a repair, per the rule against falsified numbers.
Driveway Gate Installation
Signs you need it
Your driveway opens directly to a main road or a private drive with no existing gate, and you want control over who pulls up to the property.
What it costs in Longboat Key
Driveway gate installation in Longboat Key typically ranges from $2,200 to $4,500 depending on the gate material, width, and whether it is automated or manual.
How we do it
We survey the drive width and swing or slide path, spec the gate leaf and operator, set and anchor the posts, hang the gate, and wire and test any automation.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the road or lacks the setback space for a swing gate, so the gate has to slide parallel to the property line.
What it costs in Longboat Key
Sliding gate installation in Longboat Key ranges from $2,200 to $4,500, with the higher end reflecting longer or cantilevered gates and full automation.
How we do it
We pour or set the track base, align the track with the drive, stand the gate, install the operator and rack or chain drive, and test travel limits and safety stops.
What Gate Installation Costs in Longboat Key
| Item | Typical range in Longboat Key |
|---|---|
| Automatic gate system (1 opener, basic pad) | $2,200 – $3,500 |
| Driveway gate installation (automated) | $2,200 – $4,500 |
| Sliding gate installation | $2,200 – $4,500 |
Does Longboat Key require a permit for a new gate?
Yes, most new gate installations on Longboat Key need a permit through the town, especially for automated systems and any gate facing a public right-of-way. The barrier-island code also requires wind-rated operators and impact-rated gate leaves, so we build every quote to that standard from the first site visit.
How long does a gate installation take on Longboat Key?
A standard automated driveway gate in good soil usually installs in one to two days once the gate and operator are on site. Custom ornamental gates can add lead time for fabrication, and elevated or sealed operator mounts for flood-prone lots may add a few hours of concrete and conduit work.
Brands We Service in Longboat Key
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, and we keep the most common boards, remotes, photo-eyes, and safety-loop parts for those brands stocked on our trucks. That means no second trip back to a warehouse while your Longboat Key gate sits open. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Longboat Key, FL
| Service | Typical range in Longboat Key |
|---|---|
| Gate repair – minor (stuck or misaligned) | $145 – $225 |
| Gate repair – new hinge or hardware | $180 – $340 |
| Gate repair – spring or tension replacement | $220 – $480 |
| Gate repair – new rollers or track section | $300 – $600 |
| Gate repair – post realignment | $250 – $600+ |
| Gate repair – full new frame (swing gate leaf) | $900 – $1,700+ |
| Gate repair – full new frame (slide gate leaf) | $1,200 – $2,800+ |
| Electric gate repair – control board replacement | $350 – $1,000+ |
| Electric gate repair – motor/gearbox replacement | $640 – $1,600 |
| Electric gate repair – keypad or intercom replacement | $180 – $400 |
| Automatic gate installation | $2,200 – $4,500 |
| Driveway gate installation | $2,200 – $4,500 |
What pushes a Longboat Key quote higher is the salt. Corroded posts that need to be cut out and re-set, seized hinges that have to be torched off, and motor housings that need sealing and elevation on flood-prone lots all add labor compared to an inland job. Every price is quoted and agreed before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Longboat Key
We cover all of Longboat Key, from the condominium entries and private drives on the north end down through the estate lots mid-island to the southernmost communities near the Bradenton Beach line. Our typical response window on the island is same-day for urgent gate failures and next-day for scheduled installation estimates.
- Country Club Shores
- Bay Isles
- Queens Harbour
- Longboat Harbour
- Buttonwood Harbour
Service Area – Cities Near Longboat Key
Tampa Gate Company serves Longboat Key and the surrounding barrier-island and bayside communities. Many of our Longboat Key calls come from property managers who also handle gates in Cortez, FL, West Bradenton, FL, Bayshore Gardens, FL, and Bradenton Beach, FL, and we run the same gate-only service across that whole area.
Serving Longboat Key, FL — Our Local Coverage Area
We’re based in the Longboat Key area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Longboat Key
We keep same-day availability open for Longboat Key gate failures, especially after storms when sand-fouled motors and photo-eyes spike across the island. A gate that will not close is a security problem for the whole property, so emergency calls go to the front of the schedule.
Many Longboat Key condominium and community associations have their own architectural standards for gate style, height, and finish, and some require board approval before a new gate goes in. We work with those rules directly, so the gate we quote matches both the HOA standard and the town’s wind-rating code.
Yes. Most of our Longboat Key work is in gated communities, condominium entries, and private estate drives. We know how to coordinate with property managers, work around HOA access windows, and schedule multi-gate service days so a whole community gets attention in one trip.
If your gate is rusted, stuck, or not responding to its remote in Longboat Key, call Tampa Gate Company at (866) 976-0095 for a free estimate. We diagnose the actual problem, quote the repair before any work starts, and get your gate back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Longboat Key Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh