Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sarasota, FL
Gate installation in Sarasota means building for salt air, hurricane season, and a housing stock that ranges from 1950s ranch homes to canal-front estates. A gate here doesn’t just sit in a yard; it swings through humid mornings, takes wind off the Gulf, and has to clear mature hedges and stone walls. Tampa Gate Company has served Sarasota since 2013, and we install manual and electric gates that match the property rather than fighting it. If you need a new gate quoted for your Sarasota home or business, call (866) 976-0095 for a free estimate.
Why Sarasota Homes Are Different
Sarasota’s geography splits the gate market in two. Along the keys and bayside, salt-laden Gulf air and near-daily humidity corrode hinges, latches, and operators faster than almost anywhere inland. We regularly see gates on Siesta Key and along the bay where the hardware has seized from rust before the motor ever failed. Inland, in neighborhoods off Beneva Road or Fruitville, the homes are older – 1950s through 1970s ranch and block-stucco construction – and many gates sit on concrete slabs poured decades ago, so the footings and post spacing rarely match modern boxed kits. Custom fabrication is the norm here, not the exception.
The landscaping shapes the work too. Mature, high-end plantings around Sarasota’s waterfront estates mean operator arms and swing hinges often have to clear salt-tolerant hedges, oaks, and stone walls that didn’t exist when the original gate went in. That’s a design constraint as much as a repair constraint. We account for wind load from hurricane season, drainage under the gate, and the reality that a gate on a canal-front property is exposed to both moisture and salt every day of the year.
Styles & brands we work with
Our Main Sarasota Services
Most Sarasota calls to Tampa Gate Company are about two things: a gate that has stopped working, and an electric gate whose motor or control board has failed. Here’s what each one involves locally.
Gate Repair in Sarasota
A sagging gate or a seized hinge in Sarasota is usually rust, not wear. Salt air gets into the hinge barrels, the latch freezes, and the gate starts dragging against the driveway or the post. We replace or rebuild the hardware, reset the hinges, and square the frame, often same visit. On older canal-front properties, we fabricate replacement parts rather than forcing a boxed kit that doesn’t match the existing steel. One call to a specialist, not a generalist with a side interest in gates: Gate Repair in Sarasota.
Electric Gate Repair in Sarasota
Electric gate acting up? We diagnose the motor, board, and safety loop, not just the obvious. Sarasota’s humidity and frequent rain push moisture into control boards and photoelectric sensors, and storm surge near the water can corrode wiring connections inside the operator housing. We work on LiftMaster, FAAC, and BFT systems specifically, and we test the full safety circuit before we leave. Your gate is back to secure, working order. Full details: Electric Gate Repair in Sarasota.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sarasota
New gate installation in Sarasota means matching the structure to the site, not the other way around. Whether you’re in a 1970s block home off Cattlemen Road or a canal-front estate on Siesta Key, the gate has to stand up to salt, wind, and the lot’s existing drainage before it ever opens. We install and spec the whole system, from the posts and hinges to the operator and access control, and we start with a free measure and a written price, quoted and agreed before any work begins. Tampa Gate Company handles both manual and automated installations across all of Sarasota, which is why we treat Gate Installation as a full service, not a sideline.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto a busy street or you want to close off the front of the property to people who don’t belong there.
What it costs in Sarasota
Driveway gate installation in Sarasota typically runs $1,500 to $7,500 depending on gate size and material, plus operator if automated.
How we do it
We measure the driveway opening, check the slope and drainage, set the posts in concrete, hang the gate, and mount the operator if you want it automated.
Sliding Gate Installation
Signs you need it
Your driveway is tight on swing clearance or the gate runs parallel to a wall, hedge, or the road edge.
What it costs in Sarasota
Sliding gate installation in Sarasota typically runs $2,000 to $8,000 depending on track length, gate weight, and whether the motor is included.
How we do it
We set the track or cantilever rollers on a level concrete footing, hang the gate, align the wheels, and wire the operator with safety edges and stops.
What Gate Installation Costs in Sarasota
| Item | Typical range in Sarasota |
|---|---|
| Basic manual driveway gate | $1,500 – $4,500 |
| Automated swing gate with operator | $3,500 – $8,500 |
| Sliding gate with track and operator | $4,000 – $9,500 |
Does a new gate in Sarasota need a permit?
Most Sarasota gate installations require a permit, particularly for electric operators near the right-of-way. We can confirm requirements for your specific property during the measure, before any work is scheduled.
How long does gate installation take in Sarasota?
Most residential gate installations take one to three days once materials are on site. Custom iron or aluminum gates ordered to fit a canal-front or estate property typically add one to two weeks for fabrication.
Brands We Service in Sarasota
We service and install LiftMaster, FAAC, BFT, and Mighty Mule systems across Sarasota. We stock common boards, keypads, and safety sensors locally, which means faster diagnosis and fewer return trips. See our brands for the full list we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sarasota, FL
| Service | Typical range in Sarasota |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $150 – $500 |
| Gate repair, major (frame, welding, post reset) | $500 – $2,000 |
| Electric gate motor replacement | $600 – $1,800 |
| Control board replacement | $400 – $1,200 |
| Safety sensor or loop repair | $250 – $800 |
| Keypad or intercom replacement | $350 – $1,000 |
| Driveway gate installation | $1,500 – $7,500 |
| Sliding gate installation | $2,000 – $8,000 |
| Automatic gate installation with operator | $3,500 – $8,500 |
What pushes a Sarasota gate job higher is usually salt damage: a hinge that has rusted into the post, a board corroded by humidity, or a frame that has to be custom-fabricated to match an older waterfront property. The price you’re quoted is the price you approve, and we confirm it before any work starts.
Neighborhoods We Serve in Sarasota
We work across Sarasota’s ZIP codes 34233, 34234, 34235, and 34236, covering both the inland neighborhoods and the barrier islands. Our typical response window for repair calls in Sarasota is one business day, with many jobs completed on the first visit.
- Siesta Key
- Southside Village
- Gulf Gate
- Lakewood Ranch border
- Downtown Sarasota
Service Area – Cities Near Sarasota
Tampa Gate Company covers Sarasota and the surrounding communities throughout the county. We also serve Fruitville, FL just east of downtown, Sarasota Springs, FL to the south, Southgate, FL along the Trail, and Desoto Lakes, FL to the north. If you’re just over the line, call (866) 976-0095 and we’ll confirm coverage.
Serving Sarasota, FL — Our Local Coverage Area
We’re based in the Sarasota area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sarasota
Most Sarasota repair calls are scheduled within one business day. We keep common parts for LiftMaster, FAAC, BFT, and Mighty Mule systems on the truck, so many repairs are done the same visit.
Some Sarasota communities, particularly gated subdivisions and waterfront HOAs, have written standards for gate height, material, and color. We can work from your HOA’s specifications and fabricate to match, including custom iron and aluminum.
Yes. We repair and install commercial gate operators, access control, and sliding gates for Sarasota properties. Call (866) 976-0095 for a free estimate and we’ll confirm the scope and schedule.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sarasota Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman