Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Inwood, FL
Gate installation in Inwood usually means a driveway swing gate, a sliding gate across a farm entrance, or a pool-enclosure gate that’s seen too many Florida summers. Homes here sit on larger lots than you’d find in Lakeland or Winter Haven, and a good share of them still use chain-link or wood gates. That changes what we stock, how we set posts, and how we build the system to hold up to Polk County’s sandy soil and storm-season wind. Call (866) 976-0095 and you’ll talk to a gate specialist, not a dispatcher reading a script.
Why Inwood Homes Are Different
Inwood sits along the US-27/FL-17 corridor in Polk County’s phosphate and citrus belt. The housing stock is mostly mid-century to 1990s single-family homes on generous lots, plus manufactured homes and a fair number of small agricultural or equestrian parcels. That mix means we see driveway gates on older suburban lots, sure, but also field gates, livestock gates, and wide farm entrances where a gate has to swing or slide across a gravel drive.
The climate does real work against gate hardware here. Central Florida’s humid subtropical pattern means heavy afternoon thunderstorms from June through September, high humidity year-round, and the occasional tropical-storm wind event. Steel hinges rust faster than homeowners expect. Wood gates swell in summer and dry out in winter, which pulls panels out of square. And the sandy, well-drained soil that makes Polk County easy to build on also lets posts heave and lean after a week of downpours. When a gate starts dragging or the latch won’t line up, the cause is usually one of those three things. We see it often enough that our trucks carry the hardware most Inwood gates need, which saves a second trip.
Styles & brands we work with
Our Main Inwood Services
Most calls from Inwood fall into two categories: a gate that won’t open or latch correctly, and an electric operator that’s stopped responding. Here’s how each plays out locally.
Gate Repair in Inwood
Repair calls in Inwood range from a farm gate with rusted hinges and a leaning post to a driveway gate that sags so badly it scrapes the ground. Sandy soil and summer rain loosen posts here, and chain-link gates along the US-27 corridor take steady wind and corrosion. We diagnose the actual problem first: post movement, hinge wear, panel warp, latch misalignment. Then we fix what needs fixing. When a post has heaved, we reset it in properly compacted soil rather than just cranking the hinges and hoping. When the panel is salvageable, we repair it. Replacement only gets recommended when repair stops making sense. See the full scope on the Gate Repair in Inwood page.
Electric Gate Repair in Inwood
Electric gate failures in Inwood tend to surface after storms. Lightning and power surges take out control boards. Humidity corrodes low-voltage connections. Safety loops get cut when a post shifts or a vehicle runs over the loop wire. We diagnose the motor, board, safety sensors, and loop before quoting anything, because replacing a board when the real fault is a wet limit switch is a waste of your money. We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, among others. Details are on the Electric Gate Repair in Inwood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Inwood
New gate installation in Inwood usually means one of two things: replacing a worn-out gate on an existing home, or putting in a proper entrance on a rural or equestrian parcel where the old one was just a length of fence wired to a post. The housing here spans mid-century slab homes, 1980s and 1990s builds, and working acreage, so we build for sandy soil, heavy summer rain, and wind. A gate installed right in Inwood has posts set deeper than the minimum, hinges sized for the panel weight, and hardware rated for constant humidity. Our full Gate Installation service covers design, concrete work, hardware, and the electric operator when you want one.
Automatic Gate Installation
Signs you need it
You want a gate that opens without getting out of the car, or you have an existing manual gate and want it automated without redoing the whole entrance.
What it costs in Inwood
Automatic gate installation here typically runs $2,850 to $12,500, with the spread driven by operator type, panel material, and whether we’re running new power to the gate.
How we do it
We set and brace the posts, hang the gate, mount the operator, run power and low-voltage, then program remotes, keypad, and safety loops before testing under load.
Driveway Gate Installation
Signs you need it
Your current gate sags beyond reasonable repair, the posts have heaved in sandy soil, or you want a wider, cleaner entrance than the old setup allows.
What it costs in Inwood
Driveway gate installation in Inwood generally falls between $1,850 and $9,500, depending on single versus double panels, material, and whether an operator is included.
How we do it
We measure the drive width and slope, dig and pour post footings sized for the soil, hang and level the panel, and adjust hardware so the gate swings clean even after a wet season.
What Gate Installation Costs in Inwood
| Item | Typical range in Inwood |
|---|---|
| Manual driveway gate + posts and hardware | $1,850 – $4,500 |
| Automatic gate with operator and controls | $2,850 – $12,500 |
| Farm or field gate, wide single/double panel | $2,200 – $6,000 |
Do you handle the power run to the gate?
Yes. We run conduit and low-voltage wire from the nearest panel to the operator, which on larger Inwood lots can mean a 150-foot run or more. The trenching and wiring are part of the installation quote you approve before work starts.
How long does a gate installation take in Inwood?
Most manual installations finish in one day. Automatic systems usually take one to two days, depending on power distance, concrete curing for the posts, and programming. We schedule concrete work so it has time to set before we hang the panel and test under weight.
Brands We Service in Inwood
Our trucks are stocked for the systems we see most in Inwood: Viking, DoorKing, and Elite operators, plus Ghost Controls on residential driveway gates. Because we’re gate-only, we carry common boards, remotes, and safety-loop parts locally, so diagnosis and repair usually happen in one visit instead of two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Inwood, FL
| Service | Typical range in Inwood |
|---|---|
| Gate repair, manual (hinge, latch, sag, post) | $150 – $650 |
| Electric gate diagnosis and minor repair | $180 – $480 |
| Control board replacement | $350 – $900 |
| Operator or motor replacement | $600 – $1,800 |
| Safety loop replacement | $250 – $600 |
| Gate installation, manual driveway | $1,850 – $4,500 |
| Gate installation, automatic system | $2,850 – $12,500 |
| Farm or field gate installation | $2,200 – $6,000 |
Inwood pricing gets pushed up by rusted embedded posts that have to be dug out and reset, power runs longer than 50 feet, and double-panel farm gates that need heavier posts and hinge reinforcement. Whatever the job, we quote the full price and get your approval before any work starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Inwood
We cover all of Inwood, ZIP 33881, from the older residential streets near the US-27 corridor to the larger lots and acreage parcels on the north and east edges of town. Typical response for Inwood calls is same-day or next-day, depending on the time of year and whether we’re already on a job nearby.
- US-27/FL-17 corridor and nearby residential streets
- Rural parcels north of Inwood toward the county line
- Equestrian and agricultural lots on the east side
- Manufactured home communities off the main drag
Service Area – Cities Near Inwood
Beyond Inwood, we run calls regularly into Winter Haven, FL and Lake Alfred, FL to the north and east, plus the smaller communities of Jan-Phyl Village, FL and Eagle Lake, FL just down the road. If you’re on the edge of Inwood or have a property that sits between two towns, call and we’ll confirm coverage.
Serving Inwood, FL — Our Local Coverage Area
We’re based in the Inwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Inwood
Both. A meaningful share of our Inwood jobs are farm-entrance gates, livestock gates, and wide field gates on the rural-edge parcels. We size posts, hinges, and panels for wind load and sandy soil, which is different from what an ornamental subdivision gate requires.
Most gate repairs and direct replacements on existing posts don’t need a permit. New automatic systems with electrical work sometimes do, especially on larger parcels. We’ll tell you what’s required for your specific property before we start, and we handle the paperwork when a permit is needed.
Yes. We’ve installed and repaired gates in communities where the HOA has specific height, material, and color requirements. Send us the spec sheet and we’ll build to match it, including any required operator safety features like loops and photo eyes.
If your gate won’t latch, drags, or stopped opening, call (866) 976-0095 for a straight answer and a free estimate. We repair first, and if replacement is the right call, we’ll show you the numbers side by side before you decide. Tampa Gate Company has served Inwood since 2013.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inwood Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett