Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dundee, FL
Gate installation in Dundee, FL runs $2,300 to $8,900 for most residential jobs, and the work here is shaped by the Lake Wales Ridge: sandy acreage lots, long private driveways, and gates mounted on masonry columns or wood posts rather than shared HOA entrances. Dundee’s gate systems are typically custom-width swing gates or sliding gates at property lines, often automated, and always exposed to intense summer sun and near-daily wet-season storms. Tampa Gate Company has served Dundee since 2013. If your gate is leaning, dragging, or the operator quit, call (866) 976-0095 for a free estimate and an honest recommendation.
Why Dundee Homes Are Different
Dundee sits on the Lake Wales Ridge, a sandy spine of high ground running through Polk County. That elevation changes how gates fail here. The soil drains fast, which is good for flooding but bad for long-term post stability: after heavy wet-season rains, the sandy ground shifts just enough that gate posts heave and lean, and a gate that suddenly drags or won’t latch in July is usually a footing and post-alignment issue rather than a failed operator. We see this pattern weekly during summer.
Housing in Dundee ranges from older Florida Cracker-style and mid-century block homes to newer rural-residential and lakefront builds on larger lots. That means most gates are custom-width driveway gates at the end of unpaved or long driveways, mounted on masonry columns or wood posts at the property line. There are no dense subdivision HOA gate stacks to hide behind; every job is its own geometry. Add in the Ridge’s intense sun baking paint and electronics, and the near-daily afternoon storms rusting steel frames and swelling wood gates, and you have a repair profile that a generalist rarely diagnoses correctly the first time. Gates here fail from environment and alignment, not age alone.
Styles & brands we work with
Our Main Dundee Services
Most Dundee homeowners call us for two things: a gate that won’t open or close, or an electric operator that works intermittently or not at all. Each service has its own dedicated Dundee page with full pricing and detail.
Gate Repair in Dundee
Gate repair in Dundee usually means a swing gate that drags on the ground, a latch that won’t catch, a hinge pulling out of a weathered post, or a slide gate that binds on its track. On Ridge acreage, we check post alignment and footing settlement first, because sandy soil shifts more than people expect. We repair before we recommend replacement. If a gate frame is solid, we fix the hardware, re-set the post if needed, and get it latching square again. Full details are on our Gate Repair in Dundee page.
Electric Gate Repair in Dundee
Electric gate repair in Dundee is about the operator, not just the gate. The motor, control board, safety loops, keypads, and intercoms all take a beating from Florida sun and storms. We diagnose the full system, not just the obvious symptom: a gate that opens but won’t close is usually a safety sensor or loop detector, not a dead motor. We work on LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule systems specifically. See our Electric Gate Repair in Dundee page for full detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dundee
Gate installation in Dundee starts with the driveway itself: most are long, unpaved or lightly paved, and lead to a custom-width opening between masonry columns or wood posts that may have settled over years of Ridge weather. We measure the opening, check the columns and footings, and spec a gate that fits the actual site, not a catalog diagram. Full details on our process are on the Gate Installation hub page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the vehicle to open a heavy manual gate, or you need controlled access for privacy and security on a long driveway.
What it costs in Dundee
Automatic gate installation in Dundee typically runs $4,200 to $8,900 for a complete system with operator, safety sensors, and keypad or intercom.
How we do it
We assess the driveway grade and post condition, install a swing or slide operator matched to gate weight and width, wire the control board and safety loops, program remotes and keypads, and test the full opening cycle under load.
Driveway Gate Installation
Signs you need it
The old gate is sagging beyond repair, the posts have heaved out of alignment, or you’re building a new home and need a gate that fits the property line correctly.
What it costs in Dundee
Driveway gate installation in Dundee ranges from $2,300 to $5,200 for a standard double swing or slide gate without automation.
How we do it
We measure the exact opening width and grade, set or repair posts as needed, fabricate or order a gate sized to the opening, hang it on hinges or a track, and adjust for square latching and smooth travel.
What Gate Installation Costs in Dundee
| Item | Typical range in Dundee |
|---|---|
| Driveway gate (manual, double swing or slide) | $2,300 – $5,200 |
| Automatic gate system (operator, sensors, keypad) | $4,200 – $8,900 |
| Post setting or replacement (per post) | $350 – $900 |
Does a new gate in Dundee need a permit?
Most rural-residential gate installations in Polk County don’t require a building permit if the gate is on private property and doesn’t block access to a public right-of-way. An automatic gate operator with electrical work does need a licensed electrician for the power run. We handle the gate and operator side and coordinate the electrical scope.
How long does gate installation take in Dundee?
Most driveway gate installations take one to two days on site, depending on whether posts need to be re-set or replaced. Custom fabrication adds lead time before installation day. We give you a written timeline and price before any work starts.
Brands We Service in Dundee
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That brand depth means we usually recognize the problem on sight and carry the right common parts. For less common failures, parts arrive fast from our supplier network. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dundee, FL
| Service | Typical range in Dundee |
|---|---|
| Gate repair (minor, hinge or latch) | $180 – $500 |
| Gate repair (major, frame or post) | $500 – $1,800 |
| Electric gate repair (sensor or keypad) | $180 – $450 |
| Electric gate repair (control board or motor) | $450 – $1,400 |
| Automatic gate installation | $4,200 – $8,900 |
| Driveway gate installation (manual) | $2,300 – $5,200 |
| Post setting or replacement | $350 – $900 |
Costs in Dundee run higher when heavy wet-season rains have undermined post footings, or when a gate has been dragging long enough to damage the frame. Custom-width gates and long power runs to the property line also push the price up. You’ll always get a written quote before any work starts, and the number we quote is the number you pay.
Neighborhoods We Serve in Dundee
We cover all of Dundee, 33838, from the older blocks near downtown to the lakefront and acreage parcels on the town’s edge. Our team typically reaches most Dundee addresses within a day, and we schedule around the afternoon storms when the work involves electronics at the gate.
- Downtown Dundee (near Dundee Road and Scenic Highway)
- Lake Tracy and lakefront parcels
- Rural-residential acreage off Dundee Road east of US 27
- Orange-grove heritage parcels south toward Waverly
Service Area – Cities Near Dundee
Tampa Gate Company serves Dundee and the surrounding Polk County communities. We regularly work in Alturas, FL, Lake Hamilton, FL, Haines City, FL, and Cypress Gardens, FL. If you’re on the Ridge or just off it, call and we’ll tell you straight whether we can get to your gate.
Serving Dundee, FL — Our Local Coverage Area
We’re based in the Dundee area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dundee
Most Dundee jobs are scheduled same week, and many repair calls are seen the next day. We route a specialist to your gate, not a general handyman, so the first visit usually produces a diagnosis and a fixed price.
Most Dundee properties are not in HOA-governed communities, so the answer is usually no. If you are in a newer subdivision with covenants, check that document first. We can help you understand what the gate plan needs to show.
Yes. Long, unpaved driveways are the norm in Dundee, not the exception. We bring what’s needed to work at the property line, and we check how water moves across the driveway before placing posts so the gate doesn’t settle into the sand after the first wet season.
Call (866) 976-0095 for a free estimate on gate repair or gate installation anywhere in Dundee. We’ll quote the job before any work begins and get your gate back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dundee Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett