Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Auburndale
Electric gate repair in Auburndale typically runs $185 to $480 depending on whether we’re replacing a control board, rebuilding a hinge post, or swapping a failed motor. Most repairs are done same day or next day, which matters when your gate won’t open and your car is stuck in the driveway. We work throughout the 33823 area, from the lakefront streets near Lake Ariana to the older neighborhoods off Berkley Road. Call Tampa Gate Company at (866) 976-0095 and you’ll talk to a gate specialist, not a call center.
Why Tampa Gate Company Is Auburndale’s Preferred Electric Gate Repair Company
Auburndale’s housing stock leans older. Citrus-era homes on generous lots, perimeter fencing, driveway gates that have been swinging since before anyone worried about UL 325 safety standards. That’s our bread and butter. We’re a gate-only company. Every technician we send to Auburndale works exclusively on gates, which means we can usually identify a Viking or FAAC operator by sight before we even open the panel. Noel Carver built Tampa Gate Company around one idea: if you only fix gates, you get very good at fixing gates. We repair first and recommend replacement only when the numbers say repair is the wrong investment. Auburndale homeowners get the same specialist attention as commercial property managers off US-92.
Styles & brands we work with
Electric Gate Motor in Auburndale
An electric gate motor in Auburndale works harder than most people realize. Central Florida humidity corrodes connections, afternoon thunderstorms dump rain into housings, and sandy ridge soil shifts enough to put off-axis load on the operator. When the motor strains against a leaning post, it burns through gears and capacitors faster than it should. We open the housing, check the capacitor, inspect the gear assembly, and determine whether the motor failed on its own or was pushed to failure by a structural problem. If the post heave isn’t addressed, a new motor fails again. Typical motor replacement in Auburndale runs $320 to $590 parts and labor, depending on the operator model.
When a Motor Can Be Rebuilt
Some older Gate Motors are worth rebuilding rather than replacing. If you have a DoorKing or Elite operator with a clean housing and no water intrusion, replacing bearings and the capacitor can buy years of service for under $200. We tell you honestly which route makes sense for your specific unit.
Swapping a Failed Motor the Right Way
The motor splice has to be waterproofed, the limits reset, and the torque adjusted for the gate’s exact weight and travel. Cut-rate repairs skip the torque step and the gate slams or stalls. We set every operator to the manufacturer’s spec before we leave your Auburndale property.
Gate Access Control in Auburndale
Gate access control in Auburndale means keypads, intercoms, remotes, and the safety loops that tell an automatic gate when to stop and reverse. The humidity here is hard on outdoor keypads. Membrane switches develop dead zones. Contacts inside remote transmitters corrode. We diagnose the entire chain, from the clicker in your car to the control board in the operator. If a new keypad doesn’t solve the problem, we trace the wiring back to the board rather than declaring victory early. Access control repair in Auburndale typically runs $140 to $340, with new keypads or remotes at the lower end and board-level work at the higher end.
Keypads and Intercoms
Most Auburndale gates with keypads use either a Viking intercom system or a simple wired keypad tied to a LiftMaster operator. We carry replacement keypads for the common models, and we’re comfortable rewiring older systems where the original installer left a mess.
Safety Loops and Photocells
Loop detectors buried under a driveway fail when the sandy ground settles and breaks the wire. The gate then refuses to close or reverses mid-travel. We locate the break, splice it properly, and re-tune the detector for your specific drive width. This is not a guess-and-check job.
Trusted Brands We Service in Auburndale
We regularly work on LiftMaster, FAAC, BFT, Viking, and Ghost Controls systems in Auburndale, along with DoorKing and Elite commercial operators. Brand familiarity matters because each manufacturer wires their safety circuit differently. A technician who mostly installs garage doors will misread a FAAC limit switch every time. One who only knows LiftMaster may not recognize a BFT board fault code. We service the brand you already have, and if parts are discontinued we can usually retrofit a modern equivalent.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Auburndale Homes
- Post heave on sandy ridge soil: Auburndale sits on the Lake Wales Ridge, where the ground drains fast and shifts as the water table moves. Gate posts lean, the gate drags, and the operator’s limits go out of whack. The fix is resetting the post in a deeper footing and re-anchoring for wind load.
- Obsolete control boards: Many Auburndale homes have LiftMaster or FAAC operators installed 15 to 20 years ago. When the control board fails, replacement parts are often discontinued. We explain your options: a retrofit board kit or a new operator. Sometimes retrofitting is $350; sometimes replacement is smarter.
- Rusted hinges and sagging gates: Year-round humidity accelerates rust on steel hinges and chain-link hardware. A sagging gate puts massive strain on the operator and tears up rollers. We replace hinges, reinforce frames, and re-hang the gate square before touching the motor.
- Pool enclosure gate failures: Auburndale’s older homes often have pool enclosures with self-closing, self-latching gates. When the spring weakens or the latch won’t catch, the gate fails inspection. We repair the hardware to current safety code so you’re ready for a re-inspection.
Pricing for Electric Gate Repair in Auburndale, FL
Service calls to Auburndale start at $85 for diagnosis, credited toward the repair. Keypad or remote replacement runs $140 to $220. Control board replacement on a residential operator typically runs $280 to $410. Motor replacement runs $320 to $590. Full operator replacement, including labor and disposal, runs $650 to $1,200 depending on brand and gate type. Post resetting and re-concreting runs $180 to $350 per post. Every price is quoted and agreed before we start work, in writing. No surprises on the invoice. Call (866) 976-0095 for a free phone estimate.
We Also Serve Cities Near Auburndale
Our Auburndale customers often refer us to neighbors in Fussels Corner, Inwood, Lake Alfred, and Jan-Phyl Village. If your property sits on the edge of town, we’ll still reach you quickly. We’re a dedicated Electric Gate Repair company serving the entire Auburndale area, including the communities that border it. For specifics on coverage and scheduling in your part of town, see our Electric Gate Repair in Auburndale page.
Serving Auburndale, FL — Our Local Coverage Area
We’re based in the Auburndale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Auburndale
Most discontinued LiftMaster and FAAC control boards can be retrofitted with a modern aftermarket board that fits the original housing and works with your existing motor and accessories. The retrofit typically costs $280 to $410 installed in Auburndale, versus $650 to $1,200 for a full operator replacement. If the motor is also tired, replacement makes more sense than retrofitting a board onto a dying operator. We’ll show you both numbers before any work starts. Call (866) 976-0095 to set up an inspection.
Because Auburndale sits on the Lake Wales Ridge, the sandy soil drains fast and shifts with the water table. Heavy summer rains saturate the ground, then it dries and settles unevenly. Posts set in shallow concrete footings heave and lean. The permanent fix is digging a deeper, wider footing so the post anchors below the movement zone. We recently serviced a LiftMaster swing gate off Berkley Road where the hinge post had heaved after storms, throwing off the operator’s limits. We reset the post in a deeper footing, replaced the worn hinges, and recalibrated the operator. The gate has worked cleanly since.
UL 325 requires electric gates to have functioning safety devices that reverse or stop the gate when an obstruction is encountered. In practice, that means working photocells or contact edges on both sides of the gate, plus a properly tuned loop detector if one is installed. If your gate forces itself closed against resistance, or if the photocells are bypassed, it fails. We test every safety device during every Auburndale repair call and bring the system up to current standard. Pool enclosure gates have additional self-closing and self-latching requirements we can check too.
Yes. We replace rusted self-closing hinges, weak springs, and worn latches so the gate closes and latches on its own every time. This is a common call in Auburndale’s older pool homes, where years of humidity and salt air from pool chemicals rust the hardware. Repair usually runs $140 to $260. You’re back to code and ready for inspection the same day we finish.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite operators. That covers nearly every residential and commercial system installed in Auburndale over the last 30 years. We keep common replacement boards and remotes stocked, so most repairs don’t require a second trip.
If your electric gate is acting up in Auburndale, call Tampa Gate Company at (866) 976-0095. We’ll talk through what you’re seeing, give you a straight answer, and schedule a time that works. Free estimates, upfront pricing written before work begins, and a gate that works the way it should.
Written by Noel Carver, Owner at Tampa Gate Company, providing electric gate repair in Auburndale and throughout Central Florida.