Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Dundee
Electric gate repair in Dundee usually comes down to one of two things: a gate that stopped moving, or a gate that moves wrong, binding, dragging, or reversing mid-travel. Our technicians diagnose the operator, board, and safety loop rather than guessing at the obvious. If you’re off Lake Trask Road or down a long driveway south of Dundee Road, call (866) 976-0095 for a free estimate.
We know Dundee’s gates sit on Lake Wales Ridge sand, not subdivision concrete pads. That changes what fails and how we fix it. Most repair calls here aren’t dead motors. They’re gates that shifted out of alignment after wet-season rain softened the post footings, and the operator is working harder than it should. We see it every July.
That’s the difference a gate-only specialist brings to a small town like Dundee. Every tool, every part, every hour of training is about gates. Not HVAC, not plumbing, not garage doors. Just gates, and the electric systems that move them.
Why Tampa Gate Company Is Dundee’s Preferred Electric Gate Repair Company
Dundee homeowners and property managers call us because we recognize their system when we pull up. A Viking slide gate on a custom-width driveway, a Ghost Controls opener on a steel swing gate, a DoorKing operator on a commercial entrance off US 27, we’ve worked on all of it. That familiarity means faster diagnosis and fewer return trips.
Our reputation in Dundee was built one repair at a time, often on the tail end of a storm. When a gate won’t latch after a week of afternoon downpours, residents call us instead of a general contractor who might replace a perfectly good operator. Noel Carver has built the company around repair-first honesty: we recommend replacement only when repair genuinely isn’t the right answer.
We dispatch to Dundee from our Tampa base multiple times per week, and we schedule repairs around your availability, not the other way around. For a broken security gate on a lakefront lot or an acreage property off Dundee Road, call (866) 976-0095 and we’ll get a specialist out.
Styles & brands we work with
Commercial Gate Operator in Dundee
A commercial gate operator in Dundee usually means an automated entry system on a business, farm, or multi-property access point along the US 27 corridor or near the industrial edges of town. These operators run heavier cycles than residential systems, often dozens of open-close cycles daily, and failures here aren’t optional. A down gate blocks deliveries, tenants, and emergency vehicles.
Operator Diagnosis on Commercial Systems
We start with the control board, safety loops, and limit settings before touching the motor. Many commercial operators in Dundee are DoorKing or Elite models, and we stock common repair parts for both. A commercial gate that reverses mid-cycle or won’t respond to the keypad is frequently a loop detector or limit switch issue, not a burned motor.
What Commercial Repair Costs in Dundee
In Dundee, a typical commercial gate operator repair runs $285 to $700 depending on whether we’re replacing a limit switch, a loop detector, or a control board. Full operator replacement on a commercial system starts around $1,800 and goes up with gate weight and access-control integration. We quote pricing before any work begins, so there’s no invoice surprise at the end.
Gate Opener Repair in Dundee
Gate opener repair in Dundee frequently gets misdiagnosed. A homeowner hears the motor strain or sees the gate stop mid-travel and assumes the opener is dead. Just as often, the opener is fine and the gate itself has shifted out of alignment from Ridge sand settling after heavy rain. That misdiagnosis costs Dundee residents hundreds in unnecessary replacement parts.
Opener Components We Repair
We repair control boards, limit switches, safety photocells, keypads, and remote-control receivers on residential openers. Brands we service include Viking, Ghost Controls, Elite, DoorKing, and more. If your opener clicks but won’t move, or moves a few inches and reverses, the issue is usually a sensor or board, and it’s repairable.
Opener Repair Pricing in Dundee
Gate opener repair in Dundee typically runs $190 to $420 for board, sensor, or limit-switch work. A complete residential opener swap, when repair isn’t the right call, runs $950 to $2,400 depending on gate type and opener brand. Every quote is agreed before the work starts.
Trusted Brands We Service in Dundee
We work on Viking and Ghost Controls systems specifically, and we’re familiar with DoorKing and Elite on the commercial side. Dundee’s mix of older mid-century homes and newer lakefront builds means we see everything from 20-year-old opener setups to current-generation smart systems. We keep common parts on our trucks for these brands, which means fewer second trips for Dundee customers and faster turnaround on most repairs. If your gate has a brand label you don’t recognize, call (866) 976-0095 and describe it, we’ve likely worked on it.
Common Electric Gate Repair Problems We See in Dundee Homes
- Post-alignment failure after wet-season rain. Lake Wales Ridge sand settles and heaves around post footings, throwing swing and slide gates out of plumb so they drag and won’t latch. This gets misdiagnosed as a dead operator constantly.
- Storm wind load on solid infill gates. Exposed rural lots off Dundee Road catch summer storm winds that push against solid steel or wood gates, overloading hinges and straining undermount operators on long driveways.
- Sun-baked electronics and rusted steel. Intense Ridge sun ages control boards and remote receivers faster than coastal climates, while daily wet-season humidity rusts steel frames and swells wood gates enough to bind the mechanism.
- Safety photocell misalignment. Near-daily storms knock sensors out of alignment or coat them with wet debris, causing gates that reverse for no visible reason or refuse to close entirely.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Dundee, FL
Residential electric gate repair in Dundee runs $190 to $420 for most opener, board, sensor, and keypad work. Post re-alignment and footing correction, which is more common here than anywhere else we serve, runs $350 to $700 depending on gate weight and how far the post has moved. Commercial operator repair runs $285 to $700. The cost driver in Dundee specifically is post and footing work after wet-season settling, not the electronics. Estimates are free, and the price you approve before we start is the price you pay.
We Also Serve Cities Near Dundee
Beyond Dundee, our electric gate specialists cover Alturas, Lake Hamilton, Haines City, and Cypress Gardens. If you’re on the edge of town or managing a property in a neighboring community, we’ll send the same gate-only team your way. Learn more about our Electric Gate Repair services or see coverage details for Electric Gate Repair in Dundee.
Serving Dundee, FL — Our Local Coverage Area
We’re based in the Dundee area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dundee
It’s usually the gate, not the operator. After Dundee’s wet-season downpours, Ridge sand shifts around post footings and the gate panel drops or torques out of alignment, which trips the operator’s safety reversal or binds the travel. We diagnose both before quoting any repair. Call (866) 976-0095 for a free estimate.
Most electric gate operators have a manual release lever or keyed disengage on the operator housing, but the specific location and procedure varies by brand. That’s the limit of what you should do yourself with a heavy gate, the tension in a loaded swing or slide panel can cause serious injury if the gate moves unexpectedly. We’ll walk you through it by phone and get a specialist out if the post-storm gate won’t re-engage properly.
Yes. The Lake Wales Ridge sand drains well but shifts enough during heavy wet-season rain that post footings settle and gate panels move out of alignment. We’ve corrected dozens of Dundee gates where the operator was fine and the post had simply heaved.
Every automatic gate needs working safety photocells or contact edges that reverse the gate when something blocks its travel. In Dundee, storm debris and misaligned sensors are a frequent cause of gates that won’t close, and we inspect entrapment protection on every repair visit. Call (866) 976-0095 if you’re unsure whether your system still meets safety standards.
Yes. Many Dundee acreage and lakefront properties run solar-powered openers, and we repair the battery, charge controller, and actuator on these systems regularly. Solar setups on the Ridge take a beating from sun and storms, but most failures are repairable without replacing the entire system.
Call Tampa Gate Company for Electric Gate Repair in Dundee
If your gate is dragging, won’t latch, or stopped moving after the latest storm, don’t guess at the cause. Call (866) 976-0095 and tell us what you’re seeing. We’ll diagnose it correctly, quote the repair before any work begins, and get your gate back to secure, working order. One call to a specialist, not a generalist with a side interest in gates.
Written by Noel Carver, Owner at Tampa Gate Company, serving Dundee and Polk County with gate-only repair and installation expertise.