Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fort Myers Shores
Electric gate repair in Fort Myers Shores typically costs $180 – $650 depending on the component, and most motor, board, and limit-switch failures can be diagnosed in a single visit. This page’s core question is simple: who in Fort Myers Shores actually understands what the Caloosahatchee River’s salt air does to gate systems? We do. Tampa Gate Company works on electric gates all day, every day, and we know exactly which parts fail first in the 33905 zip code. Call us at (866) 976-0095 and we’ll tell you straight what’s wrong and what it costs to fix.
Fort Myers Shores is a low-lying riverside community where gate repair isn’t the same job it is ten miles inland. The salt-laden air, the hurricane storm surge, the decades-old steel and chain-link gates on 1950s-through-1980s homes: they all stack the deck against gate hardware. We plan for that before we ever pull up to your driveway.
Why Tampa Gate Company Is Fort Myers Shores’s Preferred Electric Gate Repair Company
We’re a gate-only shop. That’s the whole difference. When a Fort Myers Shores homeowner calls us about a LiftMaster operator that opens but won’t close, we’re not fitting it in between water-heater calls. Every technician on our crew works on gates specifically, and we carry the parts that fail most in coastal Florida rather than ordering them after arrival.
Our reputation in Fort Myers Shores comes from diagnosing problems other companies miss. Salt air causes intermittent failures in control boards and limit switches long before you see rust on the exterior. That means a gate can act up for weeks, then behave for a month, then fail again. A generalist sees a working gate and leaves. We see the board’s condition and replace it before it strands you outside your own property at 10 p.m.
Noel Carver runs Tampa Gate Company, and he’s built the business around one idea: gate repair deserves a specialist. We answer calls from Fort Myers Shores directly, we know the 33905 service area, and we quote a fixed price before any work begins. You’ll know the number before we touch a screwdriver.
Styles & brands we work with
Electric Gate Motor in Fort Myers Shores
Electric Gate Motor replacement in Fort Myers Shores is one of the most common jobs we handle, and it’s almost always tied to the river. Salt air gets into the operator housing through small vents and gaps, corroding the contact points on the motor windings. By the time the motor hums but won’t turn, you’ve typically had weeks of sluggish operation. A new motor for a swing gate in Fort Myers Shores typically runs $400 – $800 installed, depending on the brand and whether we need to replace the arm assembly as well.
What Replacing a Motor Actually Involves
We remove the old operator, check the mounting plate and post for corrosion, and determine whether the failure is the motor alone or whether the control board and limit switches were damaged by the same salt exposure. If the board is fine, we install the new motor, set the travel limits, and test the safety sensors under load.
When a Homeowner Needs This Service
If your gate moves slower than it used to, stops midway, or makes a grinding sound before failing, the motor is likely on its way out. In Fort Myers Shores, we tell customers to treat a sluggish gate as an early warning, not a nuisance. The next stage is a gate that won’t move at all, and that’s a security problem, not an inconvenience.
Gate Access Control in Fort Myers Shores
Gate access control in Fort Myers Shores covers everything that tells your gate who to let in: keypads, remote controls, intercom systems, vehicle-detection loops, and the control board that ties them together. Salt air is brutal on all of it. Keypad membrane buttons degrade from constant humidity, and intercom speakers corrode at the wire terminals. A basic keypad replacement or reprogram runs $120 – $250 in Fort Myers Shores. A full control board replacement for an access system runs $300 – $600.
Control Boards and the Salt-Air Problem
This is the failure we see most in Fort Myers Shores that inland towns rarely deal with. The control board sits inside a housing that breathes, and every breath carries salt. Corrosion builds on the PCB traces, causing signals to drop intermittently. Your remote will work one minute, then not the next, with no warning. We’re experienced with the boards in LiftMaster, FAAC, BFT, Viking, and Mighty Mule systems, and we know from experience which models hold up better near the river.
Keypads and Remote Controls
We also repair and replace keypads and remotes for all nine major brands we service. In Fort Myers Shores, remote failures often trace back to a corroded battery terminal or a cracked keypad seal that let salt moisture inside. A new Mighty Mule or LiftMaster remote runs $60 – $120, including programming.
Trusted Brands We Service in Fort Myers Shores
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems specifically. That’s not a marketing line; it’s what we stock parts for. For Fort Myers Shores customers, that means we’re more likely to have the board, motor, or hinge you need on the van the first time we visit. We carry the brands our Electric Gate Repair team sees most along the riverside communities, because delaying a repair for a parts order from a warehouse in Tampa just makes a bad day longer.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fort Myers Shores Homes
- Salt-corroded control boards: Intermittent operation is the classic sign. Your remote works sometimes, not others. We’ve seen boards in Fort Myers Shores fail in three years that would last a decade inland.
- Storm-surge damage to hinge post footings: When storm surge floods the post holes, the concrete around the hinge posts softens and shifts. Gates sag, swing arms misalign, and the gate scrapes the driveway. We reinforce the post or reset it entirely.
- Hidden bottom-rail corrosion on older gates: Homes from the 1950s through the 1980s often have original chain-link or wrought-iron gates, and along the river side of Old Olga Road, the bottom rails rust from the inside out under peeling paint. The gate looks fine until a weld fails.
- Flood-damaged keypads and intercoms: After named storms, we replace a lot of keypads that filled with water. The buttons stop responding, and sometimes the intercom speaker rusts completely. Replacement is usually the right call, not repair.
Pricing for Electric Gate Repair in Fort Myers Shores, FL
Here are the ranges we quote for the 33905 area. A basic remote replacement runs $60 – $120. Keypad replacement or reprogramming runs $120 – $250. Control board replacement for salt-corrosion damage runs $300 – $600. A new swing gate motor runs $400 – $800 installed. Post reinforcement after storm-surge damage runs $250 – $500, depending on the post condition and whether we need to pour new concrete. Every price is quoted and agreed before any work starts. You’ll never see a surprise invoice from us. Call (866) 976-0095 for a free estimate on your specific gate.
We Also Serve Cities Near Fort Myers Shores
If you’re just outside the 33905 area, we also cover Buckingham, Olga, Gateway, and Tice. Our Electric Gate Repair in Fort Myers Shores coverage extends along the Caloosahatchee corridor and into the surrounding neighborhoods, so call us if you’re nearby and unsure.
Serving Fort Myers Shores, FL — Our Local Coverage Area
We’re based in the Fort Myers Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fort Myers Shores
Salt air. Fort Myers Shores sits directly on the Caloosahatchee River, and the salt-laden moisture gets into the operator housing and corrodes the motor windings and contact points years faster than inland air would. Homes in 33905 regularly see motor failures three to five years sooner than gates in east Fort Myers. The fix is a sealed operator housing and, in some cases, a marine-grade conformal coating on the board. Call (866) 976-0095 if you want us to inspect yours before it fails.
Look at the hinge posts. Storm surge from the Caloosahatchee can flood the post footings and shift the posts out of alignment, which makes the gate scrape or bind. If the posts have moved, the gate won’t close fully no matter how many times you reset the limits. We reset or reinforce posts in Fort Myers Shores regularly after named storms, and it’s a job that’s dangerous to attempt alone because the gate can swing under its own weight. Call us for a proper inspection.
Use a sealed operator housing with stainless hardware and specify a marine-grade coating on the board and motor. Galvanized steel posts and stainless hinges also hold up far better than painted steel near the river. When we install a new Mighty Mule or LiftMaster operator in Fort Myers Shores, we recommend these specs because we’ve seen what fails first. It adds a little to the cost upfront and saves hundreds over the gate’s life.
Yes, and it usually is. Water gets inside the keypad housing through tiny cracks or worn seals, shorts the membrane, and the buttons stop responding. We see it after almost every hurricane season in Fort Myers Shores. In most cases we replace the keypad rather than repair it, because the salt water has already started corroding the internal traces. A new keypad runs $120 – $250 in this area.
Test it with a simple obstruction test: put something in the gate’s path and see if it reverses. If the gate continues closing, the photocell is dead or the lens is so clouded from salt haze that the beam can’t pass. We replace about as many photocells in Fort Myers Shores as we do keypads, because the lenses fog permanently in this environment. A new safety sensor pair typically runs $100 – $200 installed, and we can test it while we’re there. Call (866) 976-0095 for a free estimate.
One more thing worth knowing if you live on Old Olga Road or anywhere along the river side of Fort Myers Shores. A homeowner there called us because their LiftMaster swing gate operator would open but not close reliably. An inland technician might have blamed the remote or the limit switch. We found the control board corroded from salt air and the bottom rail rusted under peeling paint. We replaced the board, switched to stainless hinges, and applied a marine-grade coating to the rail. The gate has operated smoothly since. That’s the kind of repair you get when you call a gate specialist who knows Fort Myers Shores, and you can reach us for your own gate at (866) 976-0095.
Written by Noel Carver, Owner at Tampa Gate Company, serving Fort Myers Shores and the surrounding Caloosahatchee communities.