Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Howey-in-the-Hills
Electric gate repair in Howey-in-the-Hills typically costs $180 to $620 depending on whether the issue is a control board, motor, hinge, or post footing, and most repairs can be completed in under three hours by a gate specialist who knows these lakefront and golf-course estates. We work on custom wrought iron, aluminum estate gates, and the operator systems behind them. If your gate won’t open, drags, binds, or stopped responding after a storm, call (866) 976-0095 and we’ll get it diagnosed properly. Noel Carver leads our team, and we’ve worked on enough estate entrances around this town to know that the problem is rarely as simple as it first looks.
Why Tampa Gate Company Is Howey-in-the-Hills’s Preferred Electric Gate Repair Company
We’re a gate-only shop. That matters more in Howey-in-the-Hills than in a typical suburb, because the entrances here aren’t tract-home gates that any generalist has seen a hundred times. These are custom iron and aluminum systems on long lakefront drives, golf-course frontages, and historic estate properties. When a homeowner calls us, they’re getting a specialist who recognizes the swing geometry, the in-ground operator, the brand of board, all on sight. They aren’t getting someone who installs water heaters and also “does gates.”
We run repair calls to Howey-in-the-Hills out of our Tampa base, and our techs know the route well: out over the lakes and into the estate drives. We carry components for LiftMaster, FAAC, BFT, Viking, and Mighty Mule systems as a matter of routine, because those are the operators we see most often on the large gate entrances around the Mission Inn and the lakefront properties. When we say we can fix it, we mean we can actually fix it that day, with the right part, the right way.
Styles & brands we work with





Automatic Gate Repair in Howey-in-the-Hills
Automatic Gate Repair in Howey-in-the-Hills usually means one of three things: an operator that stopped responding, a gate that’s moving but not closing fully, or a panel that’s sagging and dragging. On lakefront and large-lot properties, sag is often the underlying issue. A solid-infilled gate that catches wind like a sail puts enormous strain on the operator arm and motor, even when the gate “was working fine last month.” A typical automatic gate repair in this area runs $220 to $520 for motor work, arm replacements, and limit adjustments, with board replacements usually falling between $300 and $620 depending on the brand.
Operators and Wind Load
Solid aluminum and wrought-iron swing gates in Howey-in-the-Hills take on a lot of wind force. When the operator starts laboring, it’s frequently because the gate has been catching wind and pulling itself out of alignment. We address the mechanical alignment before touching the electrical components. If we don’t, the new motor dies the same death as the old one.
Driveway Swing Gates
Most estate entrances here are swing gates, not slide gates, and a gate that’s “slow” is usually the first sign that the arm, hinges, or post footing are out of spec. We correct the geometry and then reset the operator limits so the gate doesn’t over-travel and burn out its own motor trying to compensate. On long set-back driveways, we also check the safety loops, because a loop that’s failed in sandy soil will prevent the gate from closing safely.
Electric Gate Motor in Howey-in-the-Hills
Electric Gate Motor replacement in Howey-in-the-Hills runs $380 to $720 for a standard swing-arm or in-ground motor, installed. If the motor is paired with a proprietary board or an older hydraulic operator, the price can push toward $900. We choose motors matched to the weight and width of the gate, and we never put a residential motor on a commercial-weight custom iron gate just to save a few dollars up front. Motors fail here from three causes we see constantly: lightning damage, water intrusion in the operator box, and years of fighting a misaligned gate.
Operator Motor Assessment
Before we quote a motor replacement, we check the post stability. A settling post will eat a new motor in a year. If the post has shifted in the sandy soil near the Harris Chain of Lakes, that has to be addressed first or you’re paying twice.
Power Runs and Wiring
Some estate gates in the older parts of Howey-in-the-Hills run on original wiring that’s been in the ground for decades. We’ll tell you honestly if the wiring run needs attention. A new motor on bad wire is a short-term patch, not a repair.
Trusted Brands We Service in Howey-in-the-Hills
We work specifically on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Around Howey-in-the-Hills, the residential estate gates skew toward LiftMaster and Viking operators, with the occasional Ghost Controls system on newer builds. Because we focus on gates exclusively, we carry the boards, arms, sensors, and remotes for these brands rather than having to order every part and make a customer wait. That focus is the whole point of calling a gate company instead of a general contractor.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Howey-in-the-Hills Homes
- Lightning-damaged control boards: Summer afternoons here bring frequent thunderstorms and close strikes. We replace boards on LiftMaster and Viking operators after late-afternoon lightning events more than any other repair in Howey-in-the-Hills.
- Post settling in sandy lakeside soil: Gates near the lakefront lean and sag as the soil settles. The panel isn’t bent; the footing has moved. We reset the post, correct the sag, and the operator stops laboring.
- Corroded underground operator boxes: In-ground operators sit in saturated, humid soil and corrode from the outside. We see it often on ten- and fifteen-year-old estate systems, especially near the water.
- Wind-caught solid gate panels: Decorative wrought-iron gates catch wind like a sail. Over a few seasons, that repeated pressure wears out hinges, arms, and motor gears, often all at once.
Pricing for Electric Gate Repair in Howey-in-the-Hills, FL
Here’s what we quote over the phone for Howey-in-the-Hills work, and these are the ranges we hold to unless a tech finds something genuinely unexpected on site. A basic gate alignment and limit reset runs $170 to $260. Hinge repair on a sagging gate runs $200 to $400, including hardware. Motor replacement runs $380 to $720. Control board replacement runs $300 to $620. Operator arm replacement runs $240 to $410. If we need to reset a post because the sandy soil settled under it, that runs $450 to $800 depending on the size of the post and the extent of the excavation. Every job is reviewed with you and the price is quoted and agreed before any work starts. Call (866) 976-0095 for a free estimate.
We Also Serve Cities Near Howey-in-the-Hills
In addition to our Electric Gate Repair service across the area, we serve the communities around Howey-in-the-Hills, including Yalaha, Astatula, Tavares, and Minneola. For a closer look at our specific coverage of this community, see our Electric Gate Repair in Howey-in-the-Hills page. We know the drives and entrances throughout this part of Lake County, and we treat each gate as its own system.
Serving Howey-in-the-Hills, FL — Our Local Coverage Area
We’re based in the Howey-in-the-Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Howey-in-the-Hills
Locate the manual release handle on the operator unit. On swing gate operators, it’s usually a small pull or a keyed release that disengages the motor from the drive arm. Pull the release firmly and the gate should swing freely. Never force a gate that won’t release, because a jammed gear or seized arm can injure you if it suddenly lets go. Call (866) 976-0095 and we’ll walk you through it, or come out and handle it.
The sandy soil here absorbs water quickly and then settles as it drains, so the post footing under your gate has likely shifted. The gate panel itself hasn’t failed; the post has moved. We fix the footing, reset the post, and then re-align the gate so the operator isn’t fighting the sag.
Yes, and it’s one of the most common repair calls we make in Howey-in-the-Hills. A direct or near strike sends a surge through the power run or phone line and fries the control board. The motor can also be damaged, though the board usually fails first. We see this constantly after summer thunderstorms.
Yes. The sensors are what stop the gate from closing on a vehicle or person, and if they’re not working, the gate should not be used in automatic mode. The issue is often a misaligned photo eye, or a safety loop in the driveway that’s failed. We diagnose and fix both before putting the gate back in service.
We do. Slide gate systems on long driveways in Howey-in-the-Hills have specific failure points: the rack itself, the rollers and trucks, and the chain. We service the full system and carry replacement racks and rollers for the common slide gate sizes, so we’re not guessing at the fix.
Written by Noel Carver, Owner at Tampa Gate Company, serving Howey-in-the-Hills and Lake County’s estate and lakefront properties since day one.