Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Frostproof
Most gate failures in Frostproof trace back to the same root cause: posts shifting in sandy soil. A gate that won’t close is a security problem on a rural parcel, not just an inconvenience. Tampa Gate Company specializes in gate repair only. We diagnose the post, the hinges, the track, and the operator as one connected system, so the repair holds. Same-day service is available across the 33843 ZIP and surrounding Frostproof roads. If your gate is sagging, stuck, or failing to open, call us at (866) 976-0095 for a free estimate. Noel Carver leads our repair team, and every Frostproof job gets his direct attention.
Why Tampa Gate Company Is Frostproof’s Preferred Gate Repair Company
Frostproof gate problems are different from Tampa gate problems. Here, a gate is often forty feet long, built of heavy steel tube, and hung on posts that have spent twenty years in wet sand. That requires a specialist who recognizes the failure pattern on sight, not a generalist who shows up and guesses. We only work on gates. Every technician, tool, and part on our truck is dedicated to gate repair and gate systems.
Our Gate Repair team has fixed hundreds of gates across Polk County’s citrus belt. We know the roads around Frostproof: Scenic Highway 17, County Road 630, and the back parcels southwest toward Crooked Lake. When a gate fails on an acreage property, the owner needs a repair that survives hurricane-season wind and daily use by farm equipment, not a temporary adjustment. Noel Carver has built the company around that standard.
We repair first. If a sagging gate can be fixed by re-setting a post or retrofitting a hinge, we tell you that. Replacement becomes the recommendation only when the steel frame is rusted through or the operator can’t be safely retrofitted. That honesty is why Frostproof property owners keep our number.
Styles & brands we work with





Metal Gate Repair in Frostproof
Metal gate repair in Frostproof usually means heavy welded steel or aluminum tube frames, often forty to sixty feet long, with rust at the welds and wear at the track rollers. We repair the frame, re-weld broken joints where safe, replace seized rollers, and correct the alignment so the operator isn’t fighting the panel on every cycle. A typical metal gate repair in Frostproof runs $300 to $850 depending on the size of the gate and how much steel needs attention. When the frame is still sound, repair is the right answer.
Weld and Rust Repair
Central Florida humidity and direct sun eat through painted steel fast. On Frostproof acreages, gate frames rust at the bottom rail and at the corner welds first. We cut out rusted sections, weld in new material where the frame is thick enough, and coat the repaired area so it doesn’t re-fail in a year. If rust has thinned the frame below a safe gauge, we say so plainly and give you a straight replacement number.
Track and Roller Service
Long slide gates on Frostproof properties run on tracks that collect sand and debris. Rollers grind down, the gate tips, and the operator strains until something breaks. We replace roller assemblies, clean and re-level the track, and set the panel so it moves freely. On larger gates, this is often the difference between a motor that lasts and one that burns out early.
Wood Gate Repair in Frostproof
Wood gate repair in Frostproof often isn’t about the gate at all. It’s about the post. Wood posts rot below grade in humid, sandy soil, and a rotted post means the gate sags no matter how good the panel looks. We sister or replace posts with pressure-treated or concrete-set steel, re-hang the gate, and reset hardware so it latches cleanly. Typical wood gate repair in Frostproof runs $225 to $600. When the post is the problem, fixing it right means the gate stops sagging for good.
Post Replacement and Re-Setting
Because so many Frostproof parcels sit on sandy soil with heavy afternoon drainage, post footings shift even when they aren’t rotted. We excavate, re-set the post in fast-setting concrete, and brace it while it cures. The gate gets re-hung level and square. This is the single most common repair we perform on Frostproof gates.
Hinge and Hardware Repair
Old gate hinges on Frostproof properties are often bolted through wood that’s giving way. We upgrade to heavy strap hinges, replace lag bolts with through-bolts, and add anti-sag kits where the panel is wide. The result is a gate that swings true and latches without being lifted.
Trusted Brands We Service in Frostproof
We work on the systems Frostproof property owners already have, so we carry parts and diagnostic knowledge for the brands that show up most on rural parcels. LiftMaster and FAAC operators are common on older Frostproof automatic gates, and we service DoorKing, Viking, and Ghost Controls systems as well. An old operator with a failed control board can often be retrofitted with modern safety components without a full replacement. We stock common control boards, photocells, and remote receivers for faster turnaround on Frostproof service calls.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Frostproof Homes
- Sagging from rotted or shifted posts. Frostproof’s sandy soil and wet season drainage loosen post footings. The post leans, the gate drops, and the latch no longer lines up. We re-set or replace the post and re-hang the gate.
- Rusted frames and seized rollers. Unshaded gates on acreage parcels bake in the sun and sit in humidity. Bottom rails rust at the welds, and track rollers seize. We repair the steel and free up the rolling gear.
- Operator failure on older automatic gates. Legacy LiftMaster and FAAC control boards fail from heat and moisture. The gate sticks open or closed, often with no modern entrapment protection. We diagnose the board and retrofit safety photocells where possible.
- Gate jump on slide systems. Long slide gates with post settlement jump the rack and pinion. We re-set the post, correct the track, and re-align the drive gear so the gate stops binding.
Pricing for Gate Repair in Frostproof, FL
Gate repair in Frostproof typically costs between $225 and $850, and the price is always quoted and agreed before any work starts. You won’t get a surprise invoice after the job. Smaller repairs like a hinge replacement or latch fix run $225 to $400. Post replacement or re-setting runs $350 to $700 depending on digging conditions and post size. Full operator replacement with new safety components runs $800 to $1,500 on most Frostproof automatic gates. We give an exact written estimate before any work begins, which means a fixed price, not a guess. Call (866) 976-0095 to schedule a free estimate.
We Also Serve Cities Near Frostproof
Our Gate Repair in Frostproof coverage extends to neighboring Polk and Highlands County communities. We regularly service gates in Babson Park, Avon Park, Crooked Lake Park, and Lake Wales. If you’re on the edge of Frostproof near any of these towns, the same team and the same fixed pricing apply.
Serving Frostproof, FL — Our Local Coverage Area
We’re based in the Frostproof area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Frostproof
Most sagging gates in Frostproof aren’t a hinge problem. They’re a post settlement or rot problem. Replacing hinges on a post that’s leaning or rotted below grade won’t fix anything. We check the post first. If the post is sound, a hinge upgrade or anti-sag kit may be all you need. If the post has shifted, it gets re-set or replaced, then the gate is re-hung. Call (866) 976-0095 and we’ll tell you which one it is.
The current standard, UL 325, requires entrapment protection on automatic gates: safety photocells or contact edges that stop and reverse the gate if someone is in the path. Many older Frostproof operators were installed before these rules. We can retrofit photocells and safety edges onto most existing LiftMaster, FAAC, DoorKing, Viking, and Ghost Controls operators. On systems where the board can’t accept modern safety inputs, replacement is the right call.
Yes. We remove the rotted post, set a pressure-treated or concrete-set steel post, and re-hang the gate level. This is the most common repair we do in Frostproof, where wood posts rot below grade in the humid, sandy soil. On a recent citrus grove property off Scenic Highway 17, we replaced a rotted wooden hinge post with a concrete-set steel post and the gate has held straight through the wet season.
On Frostproof slide gates, it’s usually the re-post. Sandy soil and heavy rains shift post footings, which tips the track, which makes the gate jump. We check the post and the track level first, then inspect the rollers and the rack and pinion. Fixing the post without addressing the track means the gate will jump again. Call (866) 976-0095 for an exact diagnosis, with a fixed quote before any work begins.
Yes. We work on older FAAC and LiftMaster operators routinely, and we repair control boards where parts are still available. When a legacy board has failed and can’t be safely retrofitted with current safety features, we give you a straight replacement number and a clear explanation. Estimates are free. Call (866) 976-0095.
Need a gate repair in Frostproof today? Call Tampa Gate Company at (866) 976-0095 for a free estimate. We quote before we work, we show up when we say we will, and we fix your gate so it stays fixed.
Written by Noel Carver, Owner at Tampa Gate Company, serving Frostproof and Polk County since 2016.