Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Gandy
Gate repair in Gandy, FL usually means one of three things: a gate that won’t open, a gate that won’t close, or a gate that’s sagging so badly it drags on the concrete. Most jobs we handle in the 33716 area run between $175 and $650, and the bulk of them are completed in a single visit because we arrive with the parts a gate-only shop actually carries. Salt air and saturated soil do real damage here, and we’re used to seeing exactly what that looks like. If your gate is stuck, noisy, or leaning, call Tampa Gate Company at (866) 976-0095 and we’ll get someone out to Gandy to diagnose it properly.
Why Tampa Gate Company Is Gandy’s Preferred Gate Repair Company
We’re a gate repair specialist, which means the technician who shows up in Gandy isn’t a general handyman fitting your gate in between a water heater swap and a ceiling fan install. Every van we send to the 33716 area is stocked for gate work: rack and pinion components, hinge sets, operator boards, photo eyes, and the hardware that rusts first in bay air. Noel Carver built this company around that single trade focus, and the difference shows in how fast we diagnose a problem. When a gate has jumped its track or a control board has fried after a power surge, we recognize the failure mode on sight because we see these same systems every day.
Gandy customers call us back because we repair before we recommend replacement. Owners like Noel insist on that. If a LiftMaster operator can be fixed with a $40 capacitor, that’s what we tell you. We don’t manufacture reasons to sell you a new system. And when a gate legitimately has reached end of life, worn past the point where re-welding and component swaps make sense, we’ll tell you that straight and give you a written price for a proper replacement. That’s why homeowners and property managers across Gandy trust us with their security gates, driveway gates, and community access points.
Styles & brands we work with
Wrought Iron Gate Repair in Gandy
Wrought iron gate repair in Gandy is less about the iron itself and more about the joints, hinges, and footings that hold it together. Wrought iron is durable, but it wasn’t designed for year-round salt spray from Tampa Bay. We regularly replace seized hinges, re-weld cracked spindles and scrollwork, and grind down rust blooms before they eat through the metal. A typical hinge replacement on a wrought iron gate in Gandy runs $120 to $240 per hinge depending on size and whether we need to torch the old one out. Full re-hanging with alignment work usually lands between $300 and $500.
After a storm, wrought iron gates in this part of 33716 often show the same pattern: the post has leaned, the latch no longer lines up, and the gate binds against the jamb. We can usually have it swinging clean again in one visit.
Rust Treatment and Re-Painting on Iron Gates
We strip active rust, treat the bare metal, and prime before repainting. On gates closer to the water, we recommend an annual inspection so corrosion doesn’t get ahead of you. A rust treatment and spot repaint typically costs between $150 and $400 in Gandy depending on gate size and rust coverage.
Hinge and Post Re-Setting After Settlement
Gandy’s reclaimed fill doesn’t always drain well, and after heavy rain we see wrought iron posts leaning as the ground shifts. We dig out the old footing, re-set the post in fresh concrete, and re-hang the gate so it clears properly. This type of repair in the 33716 area generally runs $250 to $600 per post.
Metal Gate Repair in Gandy
Metal gate repair in Gandy covers the full range of welded steel and chain-link driveway gates that dominate the older home lots and manufactured home communities along the Gandy Boulevard corridor. These gates have steel frames, often with chain-link or solid infill panels, and they fail differently than decorative iron. We see rust breakthrough at the bottom rail and hinge plate, welds cracking under wind load, and posts twisting out of square when the footing fails. Replacing a bottom rail and re-welding the frame on a standard steel driveway gate in Gandy usually costs between $180 and $350.
Chain-link gates are simpler but they develop their own problems: bent top rails, stretched tension bands, and sagging uprights. The good news is steel is forgiving. We can straighten, weld, and reinforce most metal gates for far less than a replacement would cost, and the repair holds in this climate if it’s done right.
Welding and Reinforcement on Steel Gates
When a solid-panel steel gate takes wind load from a summer squall, the welds at the corner gussets are usually the first thing to fail. We grind, re-weld, and add reinforcement plate where the original design was marginal. Welded repairs in Gandy typically run $120 to $300 per gate depending on the extent of the damage.
Post Straightening and Footing Re-Set
A leaning steel post is often a footing problem, not a post problem. Gandy’s sandy fill loses bearing strength when saturated, and the whole post assembly can tilt. We brace the gate, excavate the footing, re-pour it, and true the post before rehanging. Plan on $200 to $500 per post in the 33716 area.
Trusted Brands We Service in Gandy
We work on the gate systems Gandy actually uses. We service Gate Repair for LiftMaster operators, FAAC hydraulic systems, BFT control boards, and Mighty Mule swing and slide actuators, plus Ghost Controls, Viking, Linear, DoorKing, and Elite. If you’re not sure what brand your system is, call us and describe what it’s doing. We’ll usually know from the symptoms and can bring the right parts on the first trip. Because we’re a gate specialist, we keep common components in stock locally, which means less waiting for parts on most repairs. Your gate just goes back to secure, working order faster.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Gandy Homes
- Storm surge and heavy rain knock out operators. Water gets into the control box, the board shorts, and the gate stops responding. We replace water-damaged boards and re-wire the system properly so it’s sealed against the next inundation.
- Salt air seizes hinge pins and brackets. This close to the bay, galvanized hardware rusts faster than you’d expect. Hinges that haven’t been lubricated in two years will bind, squeal, and eventually snap or tear the mounting bolts out of the post.
- Post settlement and sag after storms. Reclaimed fill under Gandy’s lots doesn’t hold up to heavy saturation. Posts heave and settle, gates start dragging, and latches stop aligning. Re-setting footings is routine work for us here.
- Photo eyes and loop detectors fail from flooding. When the sensor loop under the driveway shorts or the photo eyes get submerged, safety systems stop functioning. We replace the loop, re-aim the sensors, and get automatic operation restored.
Pricing for Gate Repair in Gandy, FL
Here’s what gate repair typically costs in Gandy, FL:
- Hinge replacement (per hinge): $120 to $240
- Post re-setting with new footing: $200 to $500 per post
- Gate realignment and re-hanging: $150 to $400
- Rust treatment and spot repaint: $150 to $400
- Weld repair and reinforcement: $120 to $300 per gate
- Operator board replacement: $180 to $450
- Photo eye or loop detector replacement: $150 to $350
What moves the price is access, size, and whether the post footing needs re-pouring. A simple hinge swap on a pedestrian gate is on the low end. A double driveway gate with two failed footings and a control board that’s been under water lands on the high end. Every price is quoted and agreed before we start work. No one gets a surprise invoice from us.
We Also Serve Cities Near Gandy
We work throughout this stretch of the bayfront. Nothing changes in how we diagnose and repair gates, whether we’re in Gandy or just across the water. We serve Feather Sound, Lealman, West and East Lealman, and Pinellas Park with the same gate specialization, same stocked vans, and same repair-first approach. If you’re a few miles outside 33716, call anyway. We’re already in the area most weeks.
Serving Gandy, FL — Our Local Coverage Area
We’re based in the Gandy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Gandy
Most gate operators have a manual release lever or key on the motor housing. Pulling it disconnects the operator from the gate so you can push the gate open by hand. The exact location varies by brand. LiftMaster slide operators have a release handle near the drive unit, while Mighty Mule swing operators have a keyed manual release on the actuator arm. For safety, close the gate’s breaker first and inspect the surrounding area for downed lines before you touch anything. This is a situation where getting the release procedure wrong can let a heavy gate roll free, so if you’re not certain, call us at (866) 976-0095 and we’ll walk you through it or send someone out.
Gandy sits on reclaimed marsh and tidal flat, which means the fill under your lot was never dry, stable ground to begin with. It’s a mix of dredge spoil and sand that absorbs water and loses strength quickly. After heavy rain or storm surge, the fill compacts and shifts, and concrete footings go along for the ride. That’s why we re-set footings and re-hang gates in Gandy more often than we replace the actual hardware. The gate itself is usually fine; the ground moved under it. Call (866) 976-0095 for a footing assessment.
In Gandy, every three months is the right interval for hinges, pivot points, and the operator chain or rack. The salt-laden air off Tampa Bay accelerates corrosion, so hardware that would go a year in inland Tampa will seize in a few months here. Use a marine-grade lubricant, not WD-40, and wipe off the old lube before applying new so you’re not trapping salt against the metal. If you hear squealing or the gate is sluggish, don’t force it. Get us out before the hinge fails completely.
It’s normal for this specific bayfront environment. Gandy’s year-round humidity plus constant salt spray from Tampa Bay will corrode an unprotected operator housing much faster than the same unit installed a mile inland. If the case is rusting but the operator still runs, we can often treat the rust, seal the housing, and extend the unit’s life. If the board or gears inside have started to corrode, replacement is usually cheaper than repeated repairs. We’ll open it up and show you what we’re seeing before recommending anything.
Walk to the gate and check three things. First, look at the posts. If they’re leaning or the gap between the gate and the post has changed, the footing may have shifted. Second, run the gate and listen for a change in sound. Grinding, clicking, or a motor that’s working but the gate isn’t moving tells you something’s off. Third, check the photo eyes and the lower rail for debris and water marks. Storm surge can leave a waterline inside the operator housing. After a major storm in Gandy, we recommend a professional inspection because footing damage and water intrusion aren’t always visible from the surface. Call (866) 976-0095 and we’ll schedule one.
If your gate is sagging, stuck, or dead after a storm, call Tampa Gate Company at (866) 976-0095. We’ll get a gate specialist to Gandy, diagnose the problem, and give you a written price before any work begins. Estimates are free.
Written by Noel Carver, Owner at Tampa Gate Company, serving Gandy and the wider Tampa Bay area since the company’s founding.