Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Groveland
If your gate won’t open, drags on the ground, or stopped responding to the keypad, you need a technician who works on gates every day, not a generalist who’ll guess at it. That’s what we do at Tampa Gate Company. We repair and install gate systems across Groveland’s 34736 ZIP code, from automated driveway gates on rural acreage to HOA entry gates along the SR-50 corridor. Most repair calls in Groveland get a same-visit diagnosis. Call (866) 976-0095 and tell us what’s happening. We’ll give you a straight answer and a written price before any work starts.
Why Tampa Gate Company Is Groveland’s Preferred Gate Repair Company
Groveland residents call us because we’re a gate-only company. Every tech, every tool, every part on our truck is for gates. We don’t split our attention across plumbing or garage doors. That focus shows up in how fast we recognize the system on your property, whether it’s a Viking swing operator off a county road or a DoorKing slide motor at a community entrance. Noel Carver built this company around that singular focus, and the result is repair work that gets diagnosed correctly the first time.
Groveland’s mix of older farmstead gates and newer HOA systems means we see obsolete control boards and worn hinge posts constantly. We know which older LiftMaster and FAAC boards can be retrofitted and which ones are cheaper to replace outright. That local experience saves Groveland property owners from spending money on a repair that won’t last. Our repair-first approach means we recommend replacement only when repair genuinely isn’t the right answer. Call (866) 976-0095 for an honest assessment.
Styles & brands we work with
Sliding Gate Repair in Groveland
Sliding gate repair in Groveland usually comes down to one of three failures: a wheel assembly that’s worn out, a motor that’s fighting a misaligned track, or a control board that stopped responding after a lightning storm. On newer subdivision lots along the SR-50 corridor, we commonly see cantilever slide gates that have jumped their track because the sandy soil shifted a post. On older rural properties, we see chain-drive slides where the chain has stretched and the limit switches are out of adjustment. A typical sliding gate repair in Groveland runs $225 – $540 depending on whether it’s a wheel replacement, track realignment, or a board swap. We quote the exact number before any work begins.
Track and Roller Service
Groveland’s sandy ground moves after heavy summer rain, and that movement travels straight into the gate track. When a roller wears flat or a track section pulls out of line, the gate fights the motor every cycle. We inspect the full track run, replace worn rollers, re-anchor loose sections, and set the gate so it rolls quiet and true. That work often prevents a motor failure down the line.
Operator and Limit Switch Adjustments
On a slide gate, the limit switches tell the motor where to stop. When they’re out of adjustment, the gate slams at the end of travel or reverses mid-cycle. We set limits, verify the safety loop wiring, and test the full open and close range. If the board is dead, we tell you straight whether a replacement board is worth it or whether a new operator makes more sense.
Wrought Iron Gate Repair in Groveland
Wrought iron gate repair in Groveland often means more than welding a cracked picket. The real culprit is usually the hinge post, which sits in sandy soil and slowly leans after each rainy season. Once the post moves, the gate sags, drags against the drive, and bends its own hinges. We repair the post footing, cut and re-weld the hinge mounts, and straighten the leaf so the gate closes against its stop with clearance to spare. Typical wrought iron repair work in Groveland runs $180 – $380 for hinge and post correction, with more involved rust repair or re-welding running $350 – $650. Price is agreed before we start.
Hinge and Post Correction
A leaning post is a foundation problem, not just a gate problem. We dig out the footing, correct the post plum, re-set it in fresh concrete, and let it cure before re-hanging the leaf. If the hinges have wallowed out their holes, we weld in fresh plates and re-drill so the gate hangs true. This is the repair that actually stops the sag instead of just buying six months.
Rust and Weld Repair
Groveland’s humidity and summer downpours put constant moisture on iron gates, especially near irrigated landscaping or where sprinklers hit the bottom rail. We cut out rusted sections, weld in new material, grind it smooth, and treat the steel to slow future corrosion. When a lower rail is too far gone, we’ll tell you the honest math: patching it again versus replacing the leaf.
Trusted Brands We Service in Groveland
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That’s the majority of what’s installed across Groveland’s residential and HOA gates. Because we service these brands every day, we carry common boards, safety sensors, and remotes on the truck, which means fewer return trips for parts. Gate Repair at Tampa Gate Company means brand-specific diagnosis, not generic troubleshooting. If your operator is a Ghost Controls on a rural driveway or a DoorKing at a community entry, we know what we’re looking at before we open the panel.
Common Gate Repair Problems We See in Groveland Homes
- Lightning-fried control boards on older operators. Central Florida storms hit Groveland hard, and an older LiftMaster or FAAC board without surge protection dies instantly. The gate goes dead, the remote does nothing, and the board has to be replaced or the operator retired.
- Sagging swing gates after the rainy season. Sandy soil loses compaction when it’s saturated, and the hinge post leans toward the gate’s weight. The leaf drags on the ground, the hinges bind, and the motor strains until it fails. We fix the post first, then the gate.
- Voltage drop on long rural wire runs. On Groveland acreage, the operator might sit 200 or 300 feet from the house, and old low-voltage wire loses current over that distance. The result is a battery that never charges, a keypad that resets, or a loop detector that won’t hold. We test the run and size the fix correctly.
- Keypad and access control failures at HOA entries. Shared community gates in Groveland see heavy daily use, and keypads, loop detectors, and intercom nodes fail from constant cycling. The board might work fine while one access component silently loses programming. We diagnose the whole chain, not just the obvious.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Groveland, FL
Here’s honest pricing for the work we do daily in Groveland. Sliding gate track and roller repair runs $225 – $540. Wrought iron hinge and post correction runs $180 – $380, with weld and rust work at $350 – $650. Light-damaged control board replacement on a common operator is typically $400 – $750 with labor. A full operator swap, where repair doesn’t make sense, starts around $1,000 and depends on the motor size and access control. Keypad or safety sensor replacement runs $125 – $260 per component. Every job gets a written quote before we start, and that number doesn’t change unless you ask us to add work. Call (866) 976-0095 for a free estimate on your gate.
We Also Serve Cities Near Groveland
Beyond Groveland, our technicians cover the surrounding south Lake County area including Mascotte, Clermont, Minneola, and Center Hill. Many of those communities share the same mix of rural acreage gates and HOA entry systems we see in Groveland every week. If your property is in one of these cities, call (866) 976-0095 and we’ll get a tech out to you.
Serving Groveland, FL — Our Local Coverage Area
We’re based in the Groveland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Groveland
It can usually be repaired. The issue on long rural runs in Groveland is almost always one of three things: a battery bank that’s undersized, a solar panel that’s too small or shaded, or a wire run with too much voltage drop. We test the charging circuit, the battery health, and the control board. If the board is fried from a lightning hit, we replace it and add surge protection at the panel. A full redo is only the answer when the operator itself is obsolete and parts are no longer made. For most rural Groveland setups, we can get the gate working with the existing operator and proper power sizing. Call (866) 976-0095 and we’ll tell you which one you’re dealing with.
Fix the post first. A gate that drags after Groveland’s wet season is almost always a post that has shifted in sandy soil, not a gate that suddenly got longer. We excavate the footing, plum the post, and re-set it in concrete engineered for the soil. Once the post is solid, we re-hang the gate and correct any hinge wear. If you try to shave or re-hang the gate without fixing the post, the sag comes back within months. We quote post repair and gate re-hang as one job, and the price is in writing before we dig. Call (866) 976-0095 for an exact quote.
No. A community entry gate that responds to remotes but ignores the keypad has a fault in the access control system, not the gate motor. That could be a keypad with failed membrane contacts, a wire run corroded at a splice, or a control board input that’s no longer reading the keypad relay. On a shared HOA gate, you’re also dealing with safety loops and multiple user programming that shouldn’t be altered without understanding the full system. We diagnose the keypad, the wire, and the board input, then replace only what failed. Call (866) 976-0095 and we’ll walk the HOA board through what we found.
Entrapment protection applies to all automated gates, not just new installations. The UL 325 standard has required photo eyes or contact edges on automated gate operators for decades, and an older Groveland gate that lacks working safety devices is a liability for the property owner. If your system has a safety loop that’s been disconnected or photocells that were never installed, we bring the gate up to current standard. That’s a repair we do regularly on older rural and HOA gates in 34736. Call (866) 976-0095 and we’ll inspect your gate’s entrapment protection and quote the fix.
Sometimes. If your operator is a current-model FAAC, BFT, or DoorKing and only the board failed, replacing the board is nearly always cheaper than a new operator. In Groveland’s market, a board replacement on those brands typically runs $400 – $750 with labor, while a full operator swap starts around $1,000. The math favors repair. Where it flips is when the board is discontinued and the only source is used stock with no warranty. At that point, we’re honest: a new operator with a factory-fresh board and surge protection is the cheaper five-year answer. Call (866) 976-0095 and we’ll tell you which side your gate falls on.
Contact Tampa Gate Company for Gate Repair in Groveland, FL
We work on gates all day, every day. Whether your gate is a Viking swing on a rural acre off the SR-50 corridor, a DoorKing slide at a Groveland HOA entrance, or an older Ghost Controls unit that’s seen better years, call (866) 976-0095 and describe what’s happening. We’ll schedule a visit and give you a written price before any work starts. Free estimates, straight answers, and a gate that’s back to secure, working order.
Written by Noel Carver, Owner at Tampa Gate Company, serving Groveland and south Lake County since 2018.