Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland City, FL
Gate installation in Highland City most often means a double-swing driveway gate on a larger suburban lot, built to handle sandy soil and afternoon thunderstorms. We’re Tampa Gate Company, a gate-only specialist serving Highland City since 2013. We install, repair, and upgrade manual and electric gate systems across ZIP code 33846. If your gate won’t open, sags on its hinges, or needs full replacement, call (866) 976-0095 for a free estimate.
Why Highland City Homes Are Different
Highland City sits squarely in one of Florida’s most active lightning corridors. From June through September, afternoon storms roll through with strikes that take out gate control boards and low-voltage wiring far more often than they damage the mechanical opening arms themselves. We see it every summer: a motor that runs fine, but a board that’s fried. The first question our techs ask is whether the neighbor’s gate is acting up too. That’s the giveaway. It’s rarely a coincidence after a big storm.
The housing stock here shapes the work, too. Most properties are suburban single-family homes with fenced driveways and perimeter gates. Many are chain-link or double-swing designs sitting in sandy, sometimes waterlogged soil. High humidity accelerates rust on steel frames and hinge posts. Irrigation-fed lawns keep the ground soft around gate posts. That combination means we spec galvanized or aluminum hardware, add drainage at the post base, and recommend surge protection as standard on any electric installation in Highland City. A gate built without those considerations in this climate becomes a recurring repair, not a one-time fix.
Along the US 98 corridor you’ll also find older rural properties and small commercial sites with gates that have been there for decades. Those jobs often need structural work before any new operator goes on: truing the frame, re-setting posts, replacing rusted hinges. It’s not the same as slapping a motor on a brand-new gate. The gate has to move square and smooth first, or the new equipment fails early.
Styles & brands we work with
Our Main Highland City Services
Highland City homeowners and property managers call us most often for two things: gate repair when the gate won’t open, sags, or comes off a hinge, and electric gate repair when the motor, board, or sensors misbehave. Here’s what each involves locally.
Gate Repair in Highland City
Gate repair here usually means rusted hinge posts, sagging double-swing gates on sandy soil, or hardware that’s given out after years of irrigation moisture and humidity. We replace hinges, weld cracked frames, re-set leaning posts, and get the gate swinging clean again. We repair first. Replacement is only the recommendation when repair isn’t the right answer. For the full rundown on what gate repair covers in Highland City, see Gate Repair in Highland City.
Electric Gate Repair in Highland City
Electric gate repair in Highland City is dominated by lightning-damaged control boards and fried low-voltage wiring during storm season. We diagnose the motor, board, safety loop, and keypad, not just the obvious symptom. If the opener hums but nothing moves, or the gate only works from one input, that’s a board or wiring fault we isolate quickly. For specific electric gate repair details in Highland City, visit Electric Gate Repair in Highland City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland City
Gate installation in Highland City means building for the realities of this climate and soil. We install new driveway gates, sliding gates, and automated systems using galvanized or aluminum hardware that won’t rust out in two summers, with post footings set below the root zone and drainage planned so water doesn’t pool at the base. Every installation starts with a free measure and a written price you approve before we order anything. We measure, spec, build, and wire the full system, including the operator, safety edges, and access control. For a look at how our full installation process works, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand every day and want push-button access from the car, or you want to control who gets onto the property without walking out to the gate.
What it costs in Highland City
Automatic gate installation in Highland City typically runs $4,500 to $16,000, depending on the opener type, gate size, and whether we’re adding keypads, intercoms, or vehicle detection loops.
How we do it
We mount the opener, run power and control wiring, install safety sensors and edge protection, set travel limits, and test the full open/close cycle for smooth, safe operation.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted, sagging, or too narrow for the vehicles you own, and repair estimates keep stacking up against a gate that’s already past its useful life.
What it costs in Highland City
Driveway gate installation in Highland City typically runs $2,500 to $9,500, with double-swing and customized steel designs at the upper end and simple single gates at the lower end.
How we do it
We set posts in concrete below the root zone, hang the gate square on heavy-duty hinges, align the latch and stops, and backfill with drainage so the posts don’t shift in sandy soil.
Sliding Gate Installation
Signs you need it
Your driveway slopes or lacks the clearance for a swing gate, or you want a gate that doesn’t need the full arc of a double-swing design to open.
What it costs in Highland City
Sliding gate installation in Highland City typically runs $3,500 to $11,000, including the track, rollers, gate panel, and operator if automated.
How we do it
We pour a level track bed with a recessed or surface track, set the gate on sealed rollers, install the operator with limit switches, and dial in the speed and soft-start settings.
What Gate Installation Costs in Highland City
| Item | Typical range in Highland City |
|---|---|
| Driveway gate (manual, single swing) | $2,500 – $9,500 |
| Sliding gate system | $3,500 – $11,000 |
| Automatic operator + controls | $4,500 – $16,000 |
How long does gate installation take in Highland City?
Most Highland City installations run one to three days from measure to final test. Custom sliding gates with automation and access control can take longer when concrete needs cure time before the gate hangs. We quote the schedule and the price before any work starts.
Do I need a permit for a gate in Highland City?
Most driveway gate installations in Highland City don’t require a permit, but automated gates with vehicle detection loops or gates near a roadway easement can trigger local review. We handle the permitting conversation as part of the estimate and tell you exactly what’s needed before we start.
Brands We Service in Highland City
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, and we keep common control boards, safety sensors, and remotes stocked for faster turnaround on Highland City repairs. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland City, FL
| Service | Typical range in Highland City |
|---|---|
| Manual gate repair | $150 – $750 |
| Electric gate repair | $200 – $1,200 |
| Control board replacement | $350 – $1,500 |
| Opener motor replacement | $650 – $2,000 |
| Driveway gate installation | $2,500 – $9,500 |
| Sliding gate installation | $3,500 – $11,000 |
| Automatic gate installation | $4,500 – $16,000 |
| Electric gate installation | $4,500 – $16,000 |
What pushes a Highland City quote up is usually the condition of the gate itself: a rusted frame that needs truing, posts that have to be re-set in sandy soil, or surge protection added to an electric system. You get the full price before we begin, and that price doesn’t change unless you approve the change in writing first.
Neighborhoods We Serve in Highland City
We cover all of Highland City, including the older subdivisions east and west of US 98, the larger-lot homes along Clubhouse Road and 4th Street, and the rural properties pushing toward the edges of ZIP code 33846. Most repair calls get a same-day or next-day response. Installations are scheduled in advance after the free measure.
- Highland City proper (33846)
- Areas along Clubhouse Road
- Neighborhoods off 4th Street
- Properties along the US 98 corridor
- Rural lots on the southern edge of Highland City
Service Area – Cities Near Highland City
We handle gate work across Polk County, and Highland City residents are well within our normal route. If you’re a property manager with gates in nearby towns, we can cover those too. See our nearby service pages for Crystal Lake, FL, Lakeland Highlands, FL, Medulla, FL, and Bartow, FL.
Serving Highland City, FL — Our Local Coverage Area
We’re based in the Highland City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland City
We’re local enough to reach most Highland City addresses same-day or next-day for urgent repairs. A broken gate is a security problem, not a parking-lot annoyance, so we route repair calls first when a gate won’t secure or won’t open. Call (866) 976-0095 and we’ll tell you the soonest we can be there.
Yes, we work on private driveway gates and perimeter gates in Highland City communities, and we’re familiar with HOA requirements around gate style, color, and automation. If your HOA has specs, bring them to the estimate and we’ll match the installation to what’s approved.
We do both, which is the point. The same company that fixes your existing gate can tell you honestly when repair has run its course and spec a proper replacement. We repair first and recommend replacement only when it’s the better financial or structural call for your Highland City property.
Call Tampa Gate Company at (866) 976-0095 for a free estimate on any gate repair or installation in Highland City. We’ll give you a real price before any work starts, and we’ll answer any gate question without the sales pitch.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland City Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang