Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Medulla
Gate repair in Medulla usually means one of two things: a swing gate that has sagged out of alignment on sandy soil, or an electric operator at the end of a long private drive that quit after a storm. We fix both, usually in a single visit. Tampa Gate Company works throughout the 33813 zip code, from Medulla Road down to the pasture-front properties along Old Highway 37. If your gate is hanging, binding, or dead at the keypad, call (866) 976-0095 and we will get a technician out to your property.
Why Tampa Gate Company Is Medulla’s Preferred Gate Repair Company
Medulla is not Lakeland. Most of the gate work here happens on unincorporated lots where the only thing between the road and a workshop, a horse paddock, or a home-based business is one gate. That changes how you repair it. There is no HOA to call, no property manager chasing bids. There is just a homeowner standing at a keypad that will not open, waiting on someone who actually understands the system.
We are a gate-only company. Every technician we send to Medulla works on gates every day, not as a side job between HVAC calls. That focus matters when your operator is a solar-charged Mighty Mule at the end of a 300-foot drive, or a LiftMaster slide gate with a burned control board from a summer lightning strike. Our team recognizes the system on sight and knows which parts fail in this climate. We repair first. Replacement only gets recommended when repair is genuinely the wrong call.
Noel Carver, the owner of Tampa Gate Company, built the business around this exact kind of work: diagnosing what actually failed, replacing only what is broken, and getting the gate back to secure working order. That is the standard on every Medulla job.
Styles & brands we work with





Metal Gate Repair in Medulla
Metal Gate Repair in Medulla comes down to steel, welds, hinges, and alignment. Most metal gates here are welded tube frames attached to chain-link or field fencing, and after a few wet seasons in central Florida they show it. The first sentence of any diagnosis is usually about the post. Sandy soil under Medulla shifts a little more every year. A gate that scraped the ground in May will be binding hard by September.
Typical metal gate repair in Medulla runs $225 to $500 when the work is hinge replacement, post straightening, or weld repair on a tube frame. If the gate has twisted enough that the frame needs to be squared and re-welded, expect the higher end. We quote every job before work starts. Pressing pause on a site visit because the invoice might grow is not something Medulla homeowners should have to do.
Hinge and Post Repair
We replace worn hinges, cut out rusted post sections, and set new post footings where the old concrete has cracked. A sagging gate in Medulla is almost never a gate problem. It is a post problem. We fix that first.
Realignment and Weld Repair
When a swing gate drags or a slide gate hops its track, we realign the frame and re-weld the stressed joints. Most Medulla metal gates return to plumb with the same frame intact. Replacement is only on the table when rust has eaten through enough of the tube to make welding unsafe.
Wood Gate Repair in Medulla
Wood Gate Repair in Medulla covers a different set of failures. These are driveway gates built from pressure-treated pine or cedar, often on acreage with a pole-barn or a paddock behind them. The two enemies are moisture at the bottom rail and sun rot at the top. In Medulla, afternoon thunderstorms soak the lower boards every summer, and the full-sun exposure bakes the upper sections until they cup and split.
Expect to pay $275 to $550 for wood gate repair in Medulla, with the range driven by how much of the frame needs rebuilt. Replacing a rotted bottom rail and re-hanging the gate sits near the low end. Rebuilding the hinge-side stile and adding a diagonal brace lands at the high end. We always confirm the price with you before cutting anything.
Frame Rebuilding and Hardware
Sagging wood gates usually mean the frame has given out, not just the hinges. We rebuild the affected rail or stile, then mount new galvanized hinges and a proper latch. The gate ends up square and the hardware outlasts the old builder-grade stuff by years.
Alignment and Latch Repair
Medulla driveways shift, and wood gates show the movement faster than steel. We correct the reveal, re-seat the hinge bolts, and adjust or replace the latch so the gate closes securely without lifting. This is also where we check for a missing drop rod, because a double gate with one leaf loose is a security gap, not an aesthetic one.
Trusted Brands We Service in Medulla
We work on the operators Medulla homeowners actually have: Mighty Mule, LiftMaster, and FAAC are the three we see most on long private drives. Mighty Mule and FAAC solar-charged units are extremely common here because running conduit from the house to the gate is expensive. LiftMaster slide operators show up on the newer properties. We keep common boards, remotes, and battery packs stocked for Medulla jobs, which means a one-truck fix instead of a parts-order delay. Visit our Gate Repair page to see the full list of systems we service.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Medulla Homes
- Post shift from sandy soil. Medulla sits on loose, sandy ground that drains fast. After seasonal downpours, hinge posts settle, swing gates bind, and slide gates jump track. Fixing the foundation is usually half the job.
- Lightning-damaged control boards. Summer thunderstorms roll through south Lakeland almost daily. Operators powered by solar and low-voltage runs take the hit, and a dead board is the tell. We keep replacements in the truck for the most common Medulla installs.
- Rust and corrosion on exposed hardware. Full sun, high humidity, and frequent rain age racks, pinions, loop detectors, and hinges faster than anywhere inland. We replace corroded rack sections and re-seal exposed connections.
- Dead solar-charged battery banks. A gate 300 feet from the house with no AC power depends on batteries. When those fail, the keypad lights up but nothing moves. We test, replace, and verify solar input so the next storm does not kill it again.
Pricing for Gate Repair in Medulla, FL
You should know the number before we show up. Here are honest Medulla ranges. Realignment or hinge replacement on a single swing gate: $225 – $350. Weld repair on a tube frame or rack replacement: $275 – $450. Control board replacement on a LiftMaster or FAAC operator: $350 – $600. Full wood frame rebuild with new hardware: $400 – $650. The final figure depends on parts and how much of the existing hardware can be reused, not on how much we think you will spend. Every estimate is free, and every price is agreed with you before work begins. For an exact quote on your gate, call (866) 976-0095.
We Also Serve Cities Near Medulla
Our Medulla customers often have family or rental properties in the surrounding area. We handle Gate Repair in Medulla and also run calls up to Lakeland Highlands, Crystal Lake, Highland City, and Combee Settlement. The same gate-only team covers the whole south Lakeland area, and the same truck stock goes with us.
Serving Medulla, FL — Our Local Coverage Area
We’re based in the Medulla area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Medulla
Lightning damage to the control board is the most likely culprit. Long low-voltage runs and solar-charged systems have no house ground to absorb the surge, so the board takes the hit. We replace the board, add surge protection where the wiring enters the operator, and test the solar input and battery health. Call (866) 976-0095 and we will diagnose it on site.
Yes, in most cases. The typical fix is resetting the hinge post in a deeper concrete footing, then re-hanging and aligning the gate. If the gate frame itself is still sound, there is no reason to replace it. We will only recommend replacement when the frame is rusted through or structurally unsafe.
We do. Mighty Mule and FAAC solar systems are the two we see most on long Medulla drives. We test the panel output, load-test the batteries, and replace the specific component that failed rather than selling a whole new opener. If the solar array is undersized for shade conditions, we will tell you and give you a price for the right panel.
Almost always. What usually happens is that the concrete pad or the track footing shifts in the sand, and the gate rides up on the rail. We correct the pad, re-level the track, and adjust the rollers. Replacing the gate is the exception, not the rule. Pressure to replace a gate that only needs a track adjustment is not how we work.
Yes. Any automatic gate operator installed after UL 325 took effect must have a monitored entrapment protection device, which is almost always a photo-eye pair. Older Medulla systems, especially solar setups put in years ago, often lack them. We can add the sensors and verify the operator settings while we are on site. That is a compliance and safety fix, not an upsell.
If your gate is down, binding, or dead at the keypad, call (866) 976-0095. We serve all of Medulla in the 33813 zip code, and estimates are free.
Written by Noel Carver, Owner at Tampa Gate Company, serving Medulla since the company’s founding.