Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Beverly Hills, FL
Gate installation in Beverly Hills is the core of what Tampa Gate Company does. We’ve served Beverly Hills since 2013, and the work here has a specific shape to it: larger lots, older Florida ranches, and gate systems that have weathered decades of Gulf humidity. Whether you need a new driveway gate on a Pine Ridge Boulevard property or an electric opener installed on a gate that has been manual for twenty years, one call to (866) 976-0095 gets a gate specialist, not a general contractor guessing at the hardware.
Why Beverly Hills Homes Are Different
Beverly Hills sits in Citrus County on Florida’s Nature Coast. What we see here is a concentration of retiree and seasonal-resident properties on larger, often fenced lots. That changes the work. Instead of dense HOA gate systems or commercial access-control jobs, most of what we do in Beverly Hills is driveway and privacy gate work on individually owned homes in the 34464 and 34465 ZIP codes. The properties were largely built between the 1960s and 1990s, which means many original gates are steel tube-frame or chain-link styles mounted on posts set in Florida sand rather than poured concrete footings. That matters when we quote an installation because we check the post foundation before recommending an opener. The high humidity and the occasional salt air that drifts inland from the Gulf accelerate rust on gate hardware, and that same dampness pushes motorized systems harder than you would expect in a drier climate. Homeowners here often live elsewhere part of the year, so the gate has to work reliably while the house sits empty, or the property loses its first line of security.
Styles & brands we work with
Our Main Beverly Hills Services
Two services cover most of what Beverly Hills homeowners call us for: gate repair when something has failed, and electric gate repair when the failure is in the motor, board, or safety system rather than the metal itself.
Gate Repair in Beverly Hills
Gate repair in Beverly Hills usually starts with a gate that drags, sags, or has come off its hinges. We see post fatigue on sandy Citrus County soil, rusted weld points on older steel gates, and latch hardware that has corroded past function. We repair first: replacement is only the recommendation when repair is not the right answer for a gate that cannot be made safe or square. This page covers the mechanical side of gate repair: sagging gates, broken hinges, failing latches, and track problems on slide systems. Gate Repair in Beverly Hills goes into detail on what we fix and what it costs.
Electric Gate Repair in Beverly Hills
Electric gate repair in Beverly Hills covers the components that make a gate move: the motor, the control board, the safety loops, and the keypads or intercoms. We work on LiftMaster, FAAC, BFT, Viking, and Mighty Mule systems specifically, which means we recognize the system on sight instead of poking around the wiring. Humidity here causes board corrosion and connector failures that a generalist often misdiagnoses as a bad motor. If your gate opens halfway, beeps without moving, or ignores the remote, that page tells you what is actually wrong: Electric Gate Repair in Beverly Hills.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Beverly Hills
Gate installation in Beverly Hills means putting in a gate that survives Florida humidity, holds square in sandy soil, and fits the larger lot sizes and privacy expectations of Citrus County homes. We measure, spec, and install both manual and motorized gates, and because we are a gate-only company, the same crew that fixes a broken opener in the 34465 ZIP can install a new system when replacement is the right call. From driveway swing gates on Pine Ridge estates to sliding gates on smaller front entries, we handle the full job. See our full Gate Installation page for the complete scope.
Automatic Gate Installation
Signs you need it
You want your gate to open without leaving the car, or you leave Beverly Hills for part of the year and need controlled access while the property sits empty.
What it costs in Beverly Hills
Automatic gate installation typically costs $450 to $900 for an operator kit plus installation labor, depending on gate weight and length.
How we do it
We check the post strength and footing, confirm the gate opens freely by hand, mount the operator and control board, install the safety loops and remote receivers, then test the full cycle under load.
Driveway Gate Installation
Signs you need it
The existing gate is too narrow for modern vehicles, has rusted through at the hinge posts, or you have never had a gate and want real privacy on a larger Citrus County lot.
What it costs in Beverly Hills
A new driveway gate ranges from $1,000 to $2,500 for a single swing gate with hardware, with double gates on wider drives running higher for the extra leaf and post work.
How we do it
We measure the driveway width and slope, set posts in concrete below the frost line, hang the gate with adjustable hinges, and align the latch so it closes square.
Sliding Gate Installation
Signs you need it
The driveway slopes upward toward the house so a swing gate would drag, or the setback is too short for a swinging leaf to clear a vehicle.
What it costs in Beverly Hills
Sliding gate installation usually runs $1,500 to $3,000 for the gate, track, and motor, with the rolling V-track setup adding cost over a swing gate.
How we do it
We pour a concrete track pad, set the freestanding roller frame or cantilever posts, hang the gate so it rolls true, and install the stop and catch hardware.
What Gate Installation Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Automatic gate operator kit (installed) | $450 – $900 |
| Single driveway gate with hardware (installed) | $1,000 – $2,500 |
| Sliding gate with track and motor (installed) | $1,500 – $3,000 |
These ranges cover the typical Beverly Hills residential job. A longer driveway, double-leaf gates, or an existing post that has rotted in sandy Citrus County soil will push the price toward the higher end. Call (866) 976-0095 for an exact quote; estimates are free.
Do I need a permit for a gate installation in Beverly Hills?
Most residential gate installations in Citrus County do not require a building permit, but an electric gate opener may need an electrical permit from Citrus County depending on the power run. We check the current county requirements before we touch the first post, so you are not surprised later.
How long does a gate installation take in Beverly Hills?
A simple driveway gate usually takes one day of on-site work after the posts are set. Sliding gate installations take one to two days because of the concrete track pad and curing time. We quote a firm schedule before starting, and we stick to it.
Brands We Service in Beverly Hills
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, and we stock common boards and remotes for these lines so we are not waiting on parts for a week. Learn more on our brands page about what we can diagnose and repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Beverly Hills, FL
| Service | Typical range in Beverly Hills |
|---|---|
| Automatic gate operator kit (installed) | $450 – $900 |
| Single driveway gate with hardware (installed) | $1,000 – $2,500 |
| Sliding gate with track and motor (installed) | $1,500 – $3,000 |
| Gate opener repair | $165 – $300 |
| Electric gate circuit board replacement | $150 – $400 |
| Electric gate sensor (photo eye) replacement | $150 – $290 |
| Gate hinge replacement or straightening | $85 – $150 per hinge |
| Gate repair labor | $65 – $100 per hour |
| New gate opener install | $300 – $700 |
| Gate door replacement | $75 – $200 |
| Sliding gate roller or track repair | $150 – $350 |
| Electric gate remote or keypad replacement | $80 – $220 |
Rust and corrosion from the humidity in Beverly Hills adds time to most repair jobs, which can push labor hours up on older steel gates. What does not change: we quote a full price up front, and that number is locked before any work starts. No surprise invoices, no added fees after the fact.
Neighborhoods We Serve in Beverly Hills
Tampa Gate Company covers all of Beverly Hills, from the 34464 ZIP along the east side to the 34465 homes west of North Forest Ridge and the neighborhoods near Central Ridge District Park. We are usually on site within one to two business days for standard repairs, and we schedule installations around your seasonal travel.
- Pine Ridge
- Beverly Hills Village
- North Forest Ridge
- Crystal Glen
Service Area – Cities Near Beverly Hills
Beverly Hills is central to our Citrus County coverage. We also serve Black Diamond, FL to the west, Pine Ridge, FL right in Beverly Hills’ own back yard, Citrus Hills, FL to the north, and Lecanto, FL just up the road. If you’re anywhere in those communities and the gate is not working, the same crew covers all of it.
Serving Beverly Hills, FL — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beverly Hills
We schedule most repairs in Beverly Hills within one to two business days. Emergency calls get priority when a gate is stuck open, blocking a driveway, or leaving a property unsecured. Call (866) 976-0095 and we will give you an honest arrival window, not a vague promise.
Some Beverly Hills communities do have covenants about gate height, material, and color, though many larger lots in the 34464 and 34465 ZIP codes have no HOA at all. We ask you to check your community documents before installation, and we will match the design to what your HOA allows.
Yes. Many Beverly Hills homeowners only live here part of the year. We can diagnose by phone or photo, schedule work during your visit, and coordinate with a property manager or neighbor for access while you are away. The gate gets fixed, and we send the invoice by email.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett