Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Lockhart, FL | Tampa Gate Company
We repair Ghost Controls gate openers across Lockhart, FL as an independent service provider. The short version: long-span swing and slide gates on Lockhart’s sandy oversized lots usually fail at the post, footing, or hinge long before the Ghost Controls operator itself goes bad. That diagnosis order is what separates a real gate specialist from someone who throws a new board at the problem and hopes. Call (866) 976-0095 and we’ll tell you what’s actually wrong, not what’s easiest to sell you.
Lockhart’s semi-rural layout means your Ghost Controls system lives a harder life than the same kit in a paved subdivision. We know those conditions because we work them every week. If you need Ghost Controls sales & service, this is where local knowledge and brand familiarity meet.
Why Lockhart Residents Choose Us for Ghost Controls Service
We’re a gate-only shop. Every technician who shows up at a Lockhart property spends their entire work week on gate systems, not air handlers or garage door springs. When a Ghost Controls swing arm binds mid-travel or a slide operator trips limits for no obvious reason, we’ve seen that exact failure on that exact brand enough times to skip the guessing phase.
Noel Carver, our owner, grew up in Seminole Heights and has spent nearly three decades working with his hands around the Tampa Bay area. He got into gate work because access control and physical security matter the moment something breaks, not a week later. That’s the standard we hold on every Lockhart call. We repair first. Replacement is only the answer when the unit’s failing internally and rebuilding it would be dishonest.
We stock OEM Ghost Controls boards, arms, and battery kits where the original unit calls for them, plus quality aftermarket brackets, hinges, and keypads when they’ll actually hold up better in Lockhart’s sandy, storm-prone ground. You get the right part for the job, not whatever’s on the truck.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Lockhart
- Post shift in sandy soil throwing the swing arm out of travel. After a Lockhart summer soaking, water percolates fast through the sandy ground and undermines post footings. The arm binds and faults while the motor and board are perfectly fine. We re-set the post on a deeper footing, re-plumb it, and re-sweep the arm travel. A board swap won’t fix a gate that’s physically out of geometry.
- Buried low-voltage runs and solar charge problems on long driveways. Many Lockhart parcels are oversized, with the gate sitting far from any AC source. A failing charge controller looks identical to a dead battery. We test the charge circuit first, then the battery, then the panel, in that order.
- Lightning-damaged control boards and keypad pairing loss. Afternoon storm season in central Florida brings intense electrical activity, and many Lockhart gates have minimal grounding at the post. A strike nearby can fry the board or wipe remote and keypad memory. We diagnose whether the board is salvageable before recommending replacement.
- Seized or rusted hinges and arm pivots loading the operator. The ghost of a Ghost Controls unit tripping limits or reversing mid-cycle is usually a mechanic problem, not an electronic one. The gate leaf drags, the operator fights it, and the board throws a fault. We free or replace the hinge and pivot, then recalibrate limits.
- Dual swing kits where one leaf drifts out of sync. On Lockhart’s long-span double gates, one leaf almost always works harder than the other. A few inches of sag on one post changes the travel arc and the master-slave sequence falls apart. We correct the gate hardware before touching the operator programming.
Ghost Controls Service in Lockhart: What Local Conditions Mean for Your Equipment
Lockhart is an unincorporated, semi-rural pocket of northwest Orange County where many parcels are oversized lots with long driveways and unpaved shoulders. The gates we repair are long-span swing and slide leaves, not the decorative short yard gates you see in Winter Park or College Park, and we also provide Ghost Controls service in Forest City. That distinction matters more than people think. A short decorative gate on a poured sidewalk slab rarely fights its own post. A 16-foot swing leaf on a wood or steel post set in Lockhart’s sandy soil fights it every single day.
After a heavy summer downpour, water drains through that sandy soil almost immediately. It doesn’t pool. It percolates, and it carries fines out from under the footing as it goes. We’ve watched long driveway swing gates on Lockhart’s unpaved shoulder lots go out of plumb within a single wet week. The operator still has power. The board still responds. But the arm is now forcing a leaf that hangs a half-inch lower than it did, and the unit faults. That’s the repair pattern unique to this area, and it’s why we check footing and post plumb before we ever open a Ghost Controls control box. If you’re on a large lot somewhere off the unpaved stretch near Lockhart, you’ve probably felt that exact sag in the gate’s travel.
Ghost Controls Models & Products We Service in Lockhart
We work on the full Ghost Controls residential lineup, including Single Swing opener kits (the TDS and ARS series DIY packages), Dual Swing kits, Slide Gate operators, and the solar-charged packages with battery backup and keypad or remote entry, plus we offer Fairview Shores Ghost Controls service. Each system has its own failure fingerprint, and we know them cold.
For parts, we use OEM Ghost Controls boards, arms, and battery kits when the unit needs them. For brackets, hinges, and keypads, we’ll often spec quality aftermarket hardware that stands up better to sandy soil and humidity cycles. We keep common Ghost Controls parts in stock so a Lockhart repair doesn’t wait on a ground shipment from a distributor. The goal is one trip, not three.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Lockhart
Ghost Controls service calls in Lockhart typically land between $95 and $250 for diagnosis and minor corrections, and $350 to $650 for major swing arm geometry work, post re-setting, or board replacement. Prices depend on gate span, post condition, and whether we’re fighting sandy footing or a simple limit recalibration. Long-span double gates on oversized lots cost more to correct than short single leaves, for the simple reason that the leaves weigh more and the soil fights back harder.
Every quote is written and confirmed before we start. No open-ended invoices. Call (866) 976-0095 and we’ll walk your gate, give you a number, and you decide. Estimates are free.
Serving Lockhart, FL — Our Local Coverage Area
We’re based in the Lockhart area and know this community well, and we also offer Ghost Controls repair in Pine Hills. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Lockhart
Because the sandy soil under one post likely shifted, dropping the leaf out of plumb and changing the arm’s travel geometry. The motor and board are usually fine. We re-set the post on a deeper footing, re-plumb the leaf, and re-sweep the arm travel. Call (866) 976-0095 and we’ll confirm it on site.
Probably not. On Lockhart’s long-driveway lots, the usual culprits are a dead battery, a failed charge controller on a solar package, or a break in the buried low-voltage run. We test in that order before anyone touches the motor. Call for a diagnostic visit and we’ll tell you what’s actually dead.
Sometimes. A direct strike that chars the board means replacement. A nearby strike that popped a relay or wiped memory is often repairable. We bench-test the board and give you an honest answer before quoting a replacement.
That’s most of what we do in Lockhart. Long-span swing and slide gates on oversized unincorporated parcels are the norm here, and the footing and post work those gates need is exactly what we spend our days correcting, along with Ghost Controls service in Eatonville.
We are not authorized, partnered with, or endorsed by Ghost Controls. We’re an independent repair company. If your system is under factory warranty, we’ll tell you when a claim makes sense before we touch anything. Our credibility comes from the number of Ghost Controls arms, boards, and keypads we’ve brought back to life in Lockhart’s sandy soil.
Service Areas Near Lockhart
Our Lockhart coverage extends to the surrounding unincorporated corners and nearby communities. We also run calls in Lockhart service area neighborhoods and the wider Orange County belt. For automation work just south, see Ghost Controls service in Orlando. Up toward Lake County, we cover Ghost Controls service in Eustis as well.
Book Your Ghost Controls Service in Lockhart Today
A gate that almost works is a gate that doesn’t work. If your Ghost Controls opener is binding, faulting, or ignoring the keypad, call (866) 976-0095 for a free estimate. We’ll come out, find the real problem, and fix it right the first time.
Written by Noel Carver, Owner at Tampa Gate Company, serving Lockhart, FL and the surrounding Orange County area.