Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Montverde, FL | Tampa Gate Company
We provide independent Ghost Controls gate repair across Montverde, FL (34756), and the thing that separates our Ghost Controls work here from anywhere else is simple: most of these operators run on solar at the end of a long unpaved driveway, far from the house. When a Ghost Controls gate goes dead in Montverde, it’s rarely the motor. It’s usually a surge-damaged board, a corroded battery harness, or a buried low-voltage cable that’s been soaking in sandy, damp soil. We know that before we even roll the truck, which means we bring the right parts on the first trip. Call (866) 976-0095 for a free estimate on Ghost Controls service anywhere in Montverde.
Why Montverde Residents Choose Us for Ghost Controls Service
Ghost Controls systems are common on Montverde’s acreage properties because their solar-charged swing and slide operators fit long driveway runs where running 120V power from the house costs a fortune. We work on those systems specifically. Not as a side line. Our team has torn into enough Ghost Controls control boards, battery harnesses, and actuator arms on Lake County estate properties that we recognize the failure mode before we open the housing.
Noel Carver, our owner, spent almost three decades working with his hands around the Tampa Bay area before narrowing his focus entirely to gate systems. That’s why we stock genuine Ghost Controls boards and actuators where they matter, and why we’re honest about when a quality aftermarket battery or hinge hardware makes more sense than the OEM part. You get a gate specialist who knows your exact system, not a generalist flipping through a manual. For Ghost Controls sales & service across the Montverde service area, we’re the call to make.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Montverde
Here’s what actually goes wrong with Ghost Controls operators on Montverde’s large-lot estates and horse properties.
- Surge-damaged control boards after summer thunderstorms. Central Florida’s afternoon lightning storms hit hard, and Montverde’s rural power grid means voltage spikes travel right down the line to your gate board. On hillside lots toward Sugarloaf Mountain where operators sit hundreds of feet from the house, that board takes the hit first. We swap in a fresh Ghost Controls board and get your gate cycling again.
- Solar and battery harness degradation. Aging sealed batteries and corroded charge-controller connections leave gates dead or sluggish after stretches of heavy overcast and rain. Montverde’s humid subtropical climate means constant moisture against those connections, especially on unpaved lanes where grit works into the enclosure. We clean, re-terminate, and replace what’s failed.
- Actuator arm and pivot wear on long-throw swing gates. Sandy soil and near-constant ground moisture shift hinge posts over time. When a post leans even a few degrees, the Ghost Controls actuator arm strains and the gate binds mid-travel. We realign posts, rebuild hinge points, and replace worn arms before they snap.
- Keypad and remote receiver dropouts. Humid-season corrosion at the entry post is common on Montverde’s private lanes. Enclosures take grit and moisture, and the receiver board inside starts intermittent. We replace corroded components and seal the enclosure properly.
- Battery backup failures. When the power blips or a storm rolls through, your Ghost Controls battery backup should take over. If it’s aged out or the charge controller is corroded, the gate simply doesn’t move. We test under load, not just voltage, because a battery that reads 12.8V resting can still collapse the moment the actuator pulls current. A gate that almost works is a gate that doesn’t work.
Ghost Controls Service in Montverde: What Local Conditions Mean for Your Equipment
Here’s the Montverde-specific reality that would not be true if we were writing this about Hernando or Crystal River. Montverde is a small, affluent rural-residential town wedged between Lake Apopka and the rising hills of south Lake County. Most properties are large-lot estates, horse properties, and gated driveways off winding county roads rather than subdivisions. That means gate repair here is overwhelmingly private drive and entry gates on acreage, not HOA community gates—though we also offer Clermont Ghost Controls service for properties just east of here. Every job is a one-off: varying power runs, long cable and piston throws, and gates set at the end of unpaved or private lanes.
What that means for Ghost Controls owners: when your gate goes dead, the problem is usually the solar battery/charge-controller or a buried low-voltage cable, not the motor. On a hillside estate lot toward Sugarloaf Mountain, our crew answered a call where a Ghost Controls dual-swing operator had gone dead after a July storm—similar to Ghost Controls repair in Winter Garden we handle on comparable rural properties. The gate sat at the end of a long unpaved lane, far from the house. We found a surge-damaged control board and a corroded solar charge-controller connection, swapped in a fresh Ghost Controls board, cleaned and re-terminated the battery harness, and the dual swing gates were cycling normally off solar by that afternoon.
Ghost Controls Models & Products We Service in Montverde
We service the full Ghost Controls residential lineup you’re likely to find on Montverde acreage: the Heavy-Duty Single Swing (TSS1) series, Dual Swing (TDS2) series, Slide (TSL) series, and the solar-charged operator kits with Tube-Gate actuator arms. When a board or actuator is a straightforward swap, we repair. We only recommend replacing the operator when the chassis, gearing, or housing is too far gone to justify the labor. We stock genuine Ghost Controls control boards, actuator arms, and battery/charge-controller components where they matter, and use quality aftermarket arms, batteries, and hinge hardware where the OEM part adds cost without durability. We’re an independent gate outfit, not authorized or sponsored by Ghost Controls, which means our recommendations are based on what actually holds up on a sandy, humid Lake County driveway.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Montverde
Ghost Controls repair pricing in Montverde lands in a few ranges depending on what failed. Control board replacement typically runs $350 to $600 installed. Solar battery and charge-controller replacement usually lands at $250 to $450. Actuator arm replacement runs $300 to $500 per arm. Full operator replacement on a single swing gate runs $1,200 to $2,200, and a dual system runs $1,800 to $3,200. Post realignment and hinge repair runs $200 to $500 per post.
Every quote is agreed before any work starts. No surprises on the invoice. A free estimate includes the diagnosis and a written price, so you’ll know the number before anything gets ordered. Call (866) 976-0095 for an exact quote on your Ghost Controls system in Montverde. Estimates are free.
Serving Montverde, FL — Our Local Coverage Area
We’re based in the Montverde area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Montverde
If the gate is solar-charged and sits far from the house, it’s usually the battery or charge controller, not the motor. Montverde’s sandy soil and humidity corrode connections, and after stretches of overcast weather the battery simply can’t hold enough charge to move the actuator. We test the battery under load before declaring anything dead. Call (866) 976-0095 and we’ll diagnose it on site.
Lightning-surge damage and power blips are the usual culprits. Montverde’s rural grid and long low-voltage runs to hillside estate gates mean voltage spikes travel straight into the control board. We replace the board and typically recommend surge protection on the supply side if this has happened more than once.
Yes, this is routine for us in Montverde. Sandy soil and constant ground moisture shift hinge posts by inches over time, which makes the actuator arm strain and the gate bind. We reset and reinforce posts, rebuild hinge points, and straighten the arm so the gate travels cleanly. Call (866) 976-0095 for a free estimate on realignment.
We do. Montverde’s unpaved private lanes put grit and moisture into keypad and intercom enclosures, and the humid season corrodes receiver boards. We replace corroded components and reseal the enclosure so it holds up through the next summer.
We repair first. If the board, actuator, or battery is a straightforward swap, we fix it. Replacement only becomes our recommendation when the chassis, gearing, or housing is too far gone for the labor to make sense. You’ll hear that from us directly, with the numbers to back it up. Call (866) 976-0095 for an honest assessment.
Service Areas Near Montverde
Beyond Montverde, we serve nearby Lake and west Orange County communities. If you’re in Clermont, Minneola, Oakland, or Winter Garden, we can help. For full coverage details, check Ghost Controls sales & service, including Ghost Controls service in Hernando and Ghost Controls service in Crystal River.
Book Your Ghost Controls Service in Montverde Today
If your Ghost Controls gate is down, stuck, or sluggish, call (866) 976-0095. We’ll diagnose it over the phone, give you a straight answer, and schedule a visit. Free estimates, no pressure, and pricing agreed before we start. Your gate is back to secure, working order. Call today.
Written by Noel Carver, Owner at Tampa Gate Company, serving Montverde and the Lake County area.