Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in South Apopka, FL | Tampa Gate Company
We repair Ghost Controls gate operators across South Apopka, FL, and we’ve learned that most calls here aren’t dead boards. They’re leaning posts. The sandy soil, the summer rain pattern, and the older custom-welded gates common to this part of unincorporated Orange County combine to throw Ghost Controls limit magnets out of range. The board and motor are usually fine. The gate is not. We’re Tampa Gate Company, and we work on Ghost Controls systems every week. Call (866) 976-0095 when your gate stops mid-travel or won’t open at all.
Why South Apopka Residents Choose Us for Ghost Controls Service
Gate repair is all we do. We’re not a general contractor who also happens to look at gates, and we’re not a handyman service. Our whole shop is built around swing gates, slide gates, operators, control boards, and the specific failure patterns that come with each brand. Ghost Controls is one of the nine major lines we service, alongside LiftMaster, FAAC, BFT, Viking, and Mighty Mule. That matters because when someone in South Apopka calls with a Ghost Controls dual-swing that stalls halfway, we don’t show up and start guessing. We know this brand’s control boards, battery harnesses, and limit-magnet arms well enough to diagnose the issue over the phone before we ever roll a truck. Noel Carver, our owner, has spent close to three decades working with his hands around the Tampa Bay area, and he narrowed his focus to gate systems because a gate sits right at the intersection of access control and physical security. When it fails, you feel it immediately. We treat it that way. A gate that almost works is a gate that doesn’t work.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in South Apopka
Here’s what actually shows up on service calls in the 32704 ZIP code:
- Limit-magnet drift on long swing arms. South Apopka has a lot of drive gates hung on posts set in sandy, loose soil. After a week of heavy summer rain, a post leans an inch. That inch moves the limit magnet out of the control board’s read range, so the gate stalls mid-travel even though the motor itself is perfectly healthy. We re-set the post, re-teach the magnets, and the gate sweeps clean again.
- Corroded low-voltage terminals and battery harnesses. Central Florida humidity and storm-season rain don’t care about the plastic cover on a Ghost Controls control box. The exposed spade connectors and battery leads inside corrode fast, especially on older installs. The arm looks fine. The wiring is not.
- Seized arm pivots and rusted hinges on older steel gates. A lot of the gate hardware around South Apopka is older welded steel or chain-link. When the hinge hasn’t moved freely in years, the Ghost Controls operator strains against hardware it was never meant to fight. That kills motors and trips limit faults.
- Storm-surge damage to control boards and solar charge controllers. An afternoon lightning strike can take out the low-voltage side of a Ghost Controls board with no visible sign of damage. The sealed board looks clean. It’s dead. We test before we replace, so you’re not paying for a board when a battery or fuse is the honest fix.
- No-open calls from owner-built gates that were never properly framed. South Apopka is unincorporated Orange County, and many larger lots have no HOA dictating gate hardware. Owner-built gates and DIY Ghost Controls installs are common. We frequently correct framing and footing before the operator can be trusted to work.
Ghost Controls Service in South Apopka: What Local Conditions Mean for Your Equipment
South Apopka sits on Central Florida’s sandy soil with a high water table, and that combination does specific things to gate steel. Posts heave and shift after heavy rain. Hinges and operator arms corrode faster than they would inland. Hurricane-season wind loads bend frames and sag swing gates that were already borderline. On the larger lots off the rural roads around South Apopka, long drive gates hung on posts set in loose sand are the classic call. The post leans after a summer soaking, the gate drags, and half the job is resetting the post rather than replacing any hardware at all. We’ve answered no-open calls on custom-welded double swing gates running Ghost Controls dual-swing operators where the board logged a limit fault, but the real story was two posts leaning in loose sand and one leaf dragging against the ground. We re-set and plumbed both posts, freed a seized hinge, replaced a corroded battery harness, and re-taught the limit magnets. The gate swept clean end to end. That’s the kind of repair you only get right if you look at the gate itself before blaming the operator. For full Ghost Controls sales & service details, we cover everything from control boards to complete arm assemblies.
Ghost Controls Models & Products We Service in South Apopka
We work on the full Ghost Controls residential lineup, including the Heavy-Duty Single Swing (TDS series), Dual Swing (TD2 / TDS2), Solar-Efficient Single Swing (TSA / A Series), and slide and specialty actuator kits. Parts are the key to a fast fix in South Apopka. We stock genuine Ghost Controls control boards, limit magnets, battery harnesses, and arm assemblies alongside quality aftermarket hinges and post hardware. A storm-season no-open call is usually a same-day fix rather than a week-long parts order. We use OEM parts on the operator side and good aftermarket hardware on the structural side where it makes sense. If you’re in the broader area, we also offer dedicated Ghost Controls service in Apopka and handle the same models with the same parts stock.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in South Apopka
Most Ghost Controls repairs in South Apopka land between $145 and $385, depending on what actually failed. Here’s how that breaks down:
| Repair Type | Typical Range |
|---|---|
| Diagnostic visit | $59 – $99 |
| Limit magnet re-teach / adjustment | $145 – $210 |
| Battery harness / low-voltage terminal repair | $180 – $280 |
| Control board replacement | $285 – $385 |
| Hinge or post re-set with operator re-alignment | $250 – $450 |
The price you get is the price we quote before any work starts. No surprises after the fact. A free estimate covers the visit, the diagnosis, and a written number for the fix. Call (866) 976-0095 and we’ll get Noel or one of our techs out to give you an exact figure for your gate.
Serving South Apopka, FL — Our Local Coverage Area
We’re based in the South Apopka area and know this community well, with Ghost Controls repair in Clarcona also within our range. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in South Apopka
My Ghost Controls gate worked all dry season and now stalls halfway after the summer rains. Is the board bad?
Usually not. More often it’s a post that has leaned in the sandy soil, which moves the limit magnet out of range and trips a limit fault. We check the post and the gate geometry before we ever condemn a board. Call (866) 976-0095 and we’ll tell you over the phone what to look for before we head out.
Do you work on owner-installed Ghost Controls systems that were never permitted or professionally mounted?
Yes. Most of the Ghost Controls gates we see around South Apopka were owner-installed on rural-edge lots with no HOA and sometimes no permit, similar to the Ghost Controls service in Forest City area. We correct the framing, footings, and wiring, then set the operator up to stay working. We approach every install as if it needs a full check, because the operator is only as good as the gate underneath it.
A lightning storm killed my gate overnight and the control box looks fine. What’s the likely culprit?
Close-range lightning strikes commonly take out the low-voltage side of Ghost Controls control boards and solar charge controllers, and the sealed board gives no visible sign of the damage. Our techs carry test equipment to verify board-level failure rather than guessing, so you’re not paying for new parts you don’t need.
Can you repair my Ghost Controls operator instead of selling me a new one?
That’s our default position. We’re a repair-first shop. We won’t sell a whole new operator when a board, magnet, or battery is the honest fix, and we’ll tell you plainly when the gate itself, not the brand, is the real problem. Replacement only becomes the recommendation when repair genuinely isn’t the right answer.
Do you service other gate brands besides Ghost Controls?
We do. Ghost Controls is one of nine brands we work on regularly, including LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. If you have a different operator on another gate, the same truck can handle both. Call (866) 976-0095 with the brand and model, and we’ll tell you if we cover it before we come out.
Service Areas Near South Apopka
We work throughout the South Apopka area and the surrounding Orange County and west metro communities. Along with South Apopka service area coverage, we regularly take calls from Ghost Controls service in Mount Dora, plus Apopka proper, Ocoee, and Lockhart. If your gate is on a rural-edge lot or a subdivision entrance within reach of South Apopka, we’ll come take a look.
Book Your Ghost Controls Service in South Apopka Today
We answer calls from South Apopka every day and can usually get a tech out quickly on storm-season no-open emergencies. Call (866) 976-0095 for a free estimate, a straight answer, and a repair that lasts. We quote before we touch anything, and we stand behind the work.
Written by Noel Carver, Owner at Tampa Gate Company, serving South Apopka and Central Florida for close to three decades.