Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in St. Petersburg, FL | Tampa Gate Company
Ghost Controls gate repair in St. Petersburg comes down to understanding two things: the opener’s electronics and what this coastal climate does to them. We’re Tampa Gate Company, an independent gate specialist that services Ghost Controls systems across St. Petersburg weekly, and the honest answer is that most failures here trace to salt corrosion, hurricane-season power issues, or clearance problems in older yards, not the opener’s basic design. Call (866) 976-0095 for a free estimate, and we’ll diagnose it properly.
Why St. Petersburg Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems specifically. That matters because a technician who actually knows the difference between a TDS2 and an AXO shows up knowing where to look first. Ghost Controls built its name on DIY-friendly solar and low-voltage openers, and we’ve serviced them across St. Petersburg since they started appearing on gates in the 33730 area and the neighborhoods around it. Noel Carver, our owner, grew up in Seminole Heights and spent years working on electrical and mechanical systems around Tampa Bay before narrowing his focus entirely to gates. When a Ghost Controls board corrodes or an actuator binds, he’s seen it enough times to know whether it’s a $30 fix or a full replacement. We’re independent, which means we’re not tied to a manufacturer’s playbook, and we repair before we replace. That’s the whole approach.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in St. Petersburg
- Corroded control board terminals. Salt air in St. Petersburg gets into everything. We regularly see Ghost Controls boards where the terminal block has turned green, and the opener either works intermittently or not at all. Replacing the board and sealing the new connections properly usually solves it.
- Actuator arm binding in narrow side yards. In the Old Northeast and Kenwood, gates sit close to fences, walls, and landscaping. A Ghost Controls swing arm that’s rubbing against vegetation or debris will bind, and the motor strains or stops. Sometimes a reset works briefly, but if the arm isn’t realigned, the problem keeps coming back.
- Remote and keypad signal dropouts. Humidity gets inside receiver housings and causes signal shortfalls. You’ll notice the remote only works within a few feet of the gate. We open the housing, dry it out, check the antenna connection, and replace moisture-damaged components where needed.
- Battery backup failure. Ghost Controls battery backups are a great feature until a hurricane-season power surge cooks them. We also see chronic undercharging on solar models when oak canopies block the panel. The result is an opener that dies the moment the power goes out, which defeats the point of having a backup.
- Limit switch misalignment. A gate that slams open and then stops short, or overshoots the post, usually has a limit switch problem. Storm debris or a gate that’s shifted in the wind can knock things out of alignment. We reset the limits and check the hardware, not just the motor.
Ghost Controls Service in St. Petersburg: What Local Conditions Mean for Your Equipment
St. Petersburg’s salt air is the variable that shows up in nearly every Ghost Controls diagnosis we do here. The city sits at lower elevation than Tampa and the water is closer, which means the same opener that runs for years in Carrollwood may eat through its control board terminals in five or six years near the bay. We see the difference in the field constantly. On older homes in neighborhoods like the Old Northeast, the same run of a fence line that held a gate for decades will shift slightly as sandy soil settles, and then a swing arm that worked fine starts dragging. What this means for Ghost Controls owners specifically is that a “motor failure” is frequently the board, a corroded connector, or a gate that’s riding a quarter-inch low, and the fix is simpler than replacing the actuator. A gate that almost works is a gate that doesn’t work. We tell customers that line when they’re tempted to live with a gate that opens when it feels like it.
Ghost Controls Models & Products We Service in St. Petersburg
We service Ghost Controls Heavy-Duty Series openers like the TDS2 and TSS1, Solar Series units like the TS1 and TDS1, and Architectural Series openers like the AXO and AXR. This covers single and double swing gates, solar setups, and the heavier architectural hardware you see on newer homes and commercial properties around St. Petersburg. For repairs, we use OEM Ghost Controls boards, remotes, and actuators when they’re available and still under warranty, because compatibility matters. When a model has been discontinued, we stock quality aftermarket replacements so you’re not dead in the water waiting on a part nobody sells anymore. Our repair-versus-replace advice depends on the unit’s age and how much corrosion it’s absorbed, not on what’s easier for us to sell you.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in St. Petersburg
Ghost Controls repair costs in St. Petersburg vary by what actually failed. A simple limit-switch realignment or remote reprogramming runs less than a full control board replacement, and a corroded board with a battery backup problem on a double-swing system costs more because parts and labor both go up. Every quote is given before we start work, so you know the number going in. We offer free estimates on all repairs, and we stock common Ghost Controls parts locally so we’re not waiting on a warehouse in another state to get your gate moving again. Call (866) 976-0095 to get an exact price for your system, and we’ll tell you straight whether it’s worth fixing or not.
Serving St. Petersburg, FL — Our Local Coverage Area
We’re based in the St. Petersburg area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in St. Petersburg
Why does my Ghost Controls gate opener stop working after heavy rain or hurricane season? Rain and storm surge push salt moisture into the control board housing and the receiver, and the non-sealed terminals corrode quickly in St. Petersburg’s humid, salt-heavy air. We open the housing, inspect the board and connections, replace corroded components, and seal everything to slow the next round of damage. For a quote, call (866) 976-0095.
Can you repair a Ghost Controls gate that binds in a narrow side yard in Old Northeast? Yes, and this is one of the most common calls we get in that neighborhood. Gates in Old Northeast side yards are often inches from fences and landscaping, and when an oak branch or a vine rubs the actuator arm, the opener binds. We realign the arm, trim vegetation where needed, and set the limits correctly so the gate runs clean.
Do you replace Ghost Controls battery backups that fail after power surges? Yes, and if your battery backup is older than three years and has been through a couple of storm seasons, it’s probably nearing the end of its useful life. We test the backup, replace it when it’s dead, and check the solar charging circuit if you have a solar model. Call us for a free estimate.
My Ghost Controls remote only works when I’m close to the gate – what’s wrong? Usually, moisture has gotten into the receiver housing and degraded the antenna connection or the receiver board itself. We open the housing, dry it out, check the receiver, and replace the components that have failed. The remote itself is often fine.
Can you integrate smart access or keypad entry with an existing Ghost Controls system? Yes, Ghost Controls systems can often be paired with add-on keypads, and we can integrate gate access with intercom or smart home systems depending on the model. We’ll assess your current opener and tell you what works with it before you buy anything. Call (866) 976-0095 for options and pricing.
Service Areas Near St. Petersburg
Our St. Petersburg service area covers the 33730 ZIP and the neighborhoods around it. We also work in Tampa, Palm River-Clair Mel, East Lake-Orient Park, Egypt Lake-Leto, Progress Village, and Carrollwood. If you’re down in East Lake, see our Ghost Controls service in East Lake page. For Kenneth City, visit Ghost Controls service in Kenneth City. We cover the whole Tampa Bay side with the same Ghost Controls expertise, and we’re the Ghost Controls sales & service team Tampa residents call when a gate goes down. For the full picture of our service area, see St. Petersburg service area.
Book Your Ghost Controls Service in St. Petersburg Today
Your gate is what keeps your home or business secure, and a Ghost Controls opener that’s down is a problem. Call us at (866) 976-0095 for a free estimate, and we’ll get your gate back to working order. Same-day service is available for urgent repairs in St. Petersburg.
Written by Noel Carver, Owner at Tampa Gate Company, serving St. Petersburg and the Tampa Bay area.