Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Campbell, FL
Gate installation in Campbell means working with long rural driveways, sandy soil, and heavy seasonal weather, not just mounting a panel at the curb. We’re Tampa Gate Company, a gate-only specialist that installs, repairs, and services manual and automated systems across ZIP 34746. Most Campbell properties sit on larger lots where a gate does real work: keeping livestock or vehicles in, controlling access to short-term rental pools, and standing up to hurricane-season wind. If you need a new gate built right for this specific environment, call (866) 976-0095 for a free estimate.
Why Campbell Homes Are Different
Campbell is a small unincorporated community in Osceola County just east of Kissimmee. The housing stock splits between single-family subdivision homes and larger rural residential parcels where long driveways off county roads are the norm. Those driveways often end in swing or slide gates set back a hundred feet or more from the road, which changes how we approach every job: gate posts here sit in sandy, shifting soil that settles over time, so a post set without accounting for that movement will sag within a season or two.
The climate shapes the work just as much. Central Florida’s humid subtropical weather means intense UV exposure, frequent summer thunderstorms, and hurricane-season wind. Hinges rust faster than they do inland. Powder coating fades and thins. Opener batteries die after storm outages. And because a portion of Campbell’s homes are vacation-rental villas and pool homes near the Walt Disney World corridor, pool gates see heavy turnover use from guests who don’t treat hardware gently. Self-closing hinges and latches that work fine for a family wear out fast under rental loads. Every installation and repair we do here accounts for those two realities: shifting ground and aggressive weather.
Styles & brands we work with
Our Main Campbell Services
Most Campbell callers reach out about one of two things: a gate that won’t open or close properly, or an electric system that has stopped responding entirely. Both are covered below, and each has its own dedicated Campbell page with deeper detail.
Gate Repair in Campbell
When a swing gate starts dragging on the ground or a slide gate jumps its track, the cause in Campbell is usually settled posts or storm-shifted hardware. We repair the hardware and correct the alignment rather than masking the symptom, because a gate that scrapes today will tear up rollers and hinges within months. Our techs work on the full range of manual and automated hardware, and we repair first rather than pushing replacement. For the complete breakdown of repair scope and pricing, see Gate Repair in Campbell.
Electric Gate Repair in Campbell
After summer storms, we get a wave of Campbell calls about openers that won’t respond, keypads that beep but don’t trigger, and control boxes with water intrusion. Electric gate repair here often comes down to diagnosing the motor, the control board, and the safety loop together, not just swapping the most obvious part. We carry boards, remotes, and safety-edge components for the major brands. Read the full scope on Electric Gate Repair in Campbell.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Campbell
Gate installation in Campbell is a different job than it is in a dense subdivision closer to Orlando. Most of our Campbell installs involve long driveway runs on rural or semi-rural lots, where the gate has to be sized for vehicle access, set on posts that won’t shift in sandy soil, and wired or solar-powered for dependable operation. The climate demands materials that can handle constant humidity and storm winds, and the vacation-rental segment means we regularly install pool and security gates that must meet code and survive guest use. For full details on our installation process, see Gate Installation.
Automatic Gate Installation
Signs you need it
A long driveway you currently open and close by hand, or a gate that gets left open because closing it manually is a hassle.
What it costs in Campbell
Automatic gate installation in Campbell typically runs $3,500 to $9,000, depending on gate length, opener type, and whether we run line power or install solar.
How we do it
We build and hang the gate, set the opener and control board, install safety sensors and keypads, then program and test the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
You want controlled access at the road or property line instead of an open driveway, or you need a physical barrier for privacy or security.
What it costs in Campbell
Driveway gate installation in Campbell typically runs $2,500 to $7,500 for a manual gate, and $3,500 to $9,000 when automation is added.
How we do it
We measure the driveway opening, set posts at the proper depth for sandy soil, hang and align the gate, then install an opener, keypad, or intercom if specified.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing clearance, making a slide gate the practical choice rather than a swing panel.
What it costs in Campbell
Sliding gate installation in Campbell typically lands between $3,500 and $9,500, including track or cantilever hardware and the operator.
How we do it
We set the track or concrete pad, hang the gate, install the operator and safety loops, and align everything so the gate rolls smoothly without binding.
What Gate Installation Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Manual driveway gate, installed | $2,500 – $7,500 |
| Automatic gate system, installed | $3,500 – $9,000 |
| Sliding gate with operator | $3,500 – $9,500 |
How long does a gate installation take in Campbell?
Most single driveway gate installations finish in one to two days, depending on post setting, concrete cure time, and whether we’re running new power. Larger rural jobs or dual-leaf gates can run longer.
Do you handle the power and safety edges for Campbell installs?
Yes. We run the electrical or configure solar, and every automated gate we install includes safety edges and photo sensors that meet current code. Call (866) 976-0095 for a written quote.
Brands We Service in Campbell
We work on Mighty Mule, LiftMaster, and FAAC systems specifically, plus BFT and five other major brands. Because we’re a gate-only shop, we keep common boards, remotes, and safety-edge components in stock, which shortens turnaround on Campbell repairs. See our brands for the full lineup.
Pricing for Gate Company in Campbell, FL
| Service | Typical range in Campbell |
|---|---|
| Gate repair, general hardware | $175 – $450 |
| Electric gate board replacement | $350 – $900 |
| Opener arm or motor replacement | $400 – $1,100 |
| Manual driveway gate, installed | $2,500 – $7,500 |
| Automatic gate system, installed | $3,500 – $9,000 |
| Sliding gate with operator | $3,500 – $9,500 |
| Pool gate self-closing hinge replacement | $125 – $350 |
| Keypad or intercom installation | $350 – $1,200 |
In Campbell, prices climb when posts have shifted and need resetting, when the gate was badly installed before, or when we have to run new power down a long driveway. Whatever the number, you’ll see it in writing and approve it before any work begins.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Campbell
We cover all of ZIP 34746 and the rural residential roads around it. Typical response to most Campbell neighborhoods is one to two business days for scheduled work, with storm-related electric gate outages triaged as emergencies.
- Rural estates east of Kissimmee off Poinciana Boulevard
- Vacation-rental villa communities along the 34746 corridor
- Acreage properties off Orange Blossom Trail
- Pool-home subdivisions near the Osceola County line
- County-road parcels with long gated driveways
Service Area – Cities Near Campbell
Campbell sits close to several communities we serve regularly. If you’re in Kissimmee, FL, Celebration, FL, Loughman, FL, or Buenaventura Lakes, FL, the same gate-only team covers your area. Rural and rental-property gate work doesn’t stop at the community line, so neither do we.
Serving Campbell, FL — Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Campbell
Both. Much of our Campbell work happens on rural lots with long driveways and acreage, but we also handle subdivision homes, pool gates at vacation rentals, and small commercial properties throughout ZIP 34746.
Many Campbell gate installations fall under Osceola County’s permit process, especially automated gates and anything near a right-of-way. We prepare the permit paperwork as part of the job and build to current code.
Yes. Call (866) 976-0095 and we’ll schedule a site visit, measure the opening, check the post condition and soil, and give you a written price before any work is scheduled.
Contact Tampa Gate Company in Campbell, FL
If your gate is sagging on sandy soil, dead after a storm, or you’re ready to install a new system on a long rural driveway, call Tampa Gate Company at (866) 976-0095. We’ll schedule a free estimate, quote the work upfront, and get your gate back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campbell Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett