Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Clermont, FL
Gate installation in Clermont means building for elevation. Homes along the Clermont Chain of Lakes and in subdivisions off US-27 and SR-50 sit on ridgeline lots and sloped driveways, so a gate that gets set in plumb on level ground will be out of square here within months. We’re Tampa Gate Company, and we’ve served Clermont since 2013, installing and repairing gate systems built to handle grades, sandy soil, and Florida’s storm season. Call (866) 976-0095 for a free estimate on any gate project.
Why Clermont Homes Are Different
Clermont’s topography drives nearly every gate decision we make here. Driveways in ZIP codes 34711, 34712, 34713, and 34714 commonly run at a 10 to 15 percent grade, and homes in the 1990s through 2010s subdivisions off SR-50 and US-27 were built around that terrain rather than grading it flat. Heavy-duty cantilever and sliding gates appear more often in Clermont than in flatter Central Florida markets because a swinging gate on a slope either drags at the bottom or needs a massive post to hold its weight.
The soil compounds the problem. Sandy, high-water-table ground shifts under post footings during torrential summer rains. Steel hardware rusts fast in the humidity. UV exposure breaks down vinyl and painted finishes year-round, and the heat pushes operators and keypads to fail earlier than their rated life. In the older lakefront streets around downtown Clermont, the grade is steep enough that we routinely find posts pushed out of plumb by root growth and saturated sand after a single hurricane-season soaking. That pattern is specific to this city, and it changes how we anchor everything.
Styles & brands we work with
Our Main Clermont Services
Two services account for most of the calls we take from Clermont homeowners and property managers: gate repair and electric gate repair. Here’s what each involves locally.
Gate Repair in Clermont
Clermont gate repair usually starts with a sagging or dragging gate on a sloped driveway. The hinge or roller wear is rarely the root problem; the post has shifted or the frame has racked from the grade. We level the gate, re-anchor the posts, and replace only what actually failed. Homes in the 34714 corridor with wide vinyl privacy-fence openings often need cantilever or sliding hardware addressed rather than a simple hinge swap. For the full Clermont repair picture, see Gate Repair in Clermont.
Electric Gate Repair in Clermont
Electric gates in Clermont fail in predictable ways: heat-stressed control boards, safety loops tripped by saturated ground, and keypads baked by direct sun on west-facing walls. We diagnose the motor, board, and sensors as a system rather than replacing parts until something works. Gated-community estates along the 34714/34715 corridor often have access control tied to intercoms and loop detectors, which requires a specialist who recognizes the setup on sight. Read more at Electric Gate Repair in Clermont.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Clermont
Gate installation in Clermont has to account for the slope first. Set a gate plumb on flat ground and it will sag, rack, and drag within a season on a 10 to 15 percent grade. Our installs here begin with measuring the actual grade and soil condition, then choosing hardware and post depth that hold square through hurricane season. Clermont’s 1990s to 2010s housing stock typically spans wide masonry or vinyl privacy-fence openings, so we install a lot of heavy-duty sliding and cantilever systems rather than light swing gates. We repair first when that’s the right answer, and when replacement or new installation is the call, the same team that knows your existing system specs and installs the new one. See Gate Installation for the full service detail.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand on a sloped driveway, which wears the hinges and your patience fast.
What it costs in Clermont
Automatic gate installation in Clermont runs $3,500 to $12,500 depending on the operator, gate size, and whether new conduit and wiring must cross the slope.
How we do it
We survey the grade, set the posts below the water-table shift line, mount the operator, and program remotes and keypads on site.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto US-27, SR-50, or a busy subdivision collector, and you want a physical barrier between the road and your front door.
What it costs in Clermont
Driveway gate installation in Clermont typically runs $2,800 to $9,000 for a manual system and $4,200 to $11,500 when automation is included.
How we do it
We size the gate to your opening and grade, install the posts with concrete below the disturbed-soil line, and hang the gate so it swings or slides true.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the road, and a swing gate would drag on the high side or need a post too large for the setback.
What it costs in Clermont
Sliding gate installation in Clermont runs $3,000 to $12,000 depending on gate width, track versus cantilever design, and the footing work the sandy soil requires.
How we do it
We anchor a track or cantilever footing below grade, set the gate on rollers sized for the slope, and test the full travel before we leave.
What Gate Installation Costs in Clermont
| Item | Typical range in Clermont |
|---|---|
| Manual driveway gate, installed | $2,800 – $9,000 |
| Automatic gate operator added to existing gate | $1,200 – $4,000 |
| Full automatic gate system, installed | $3,500 – $12,500 |
Does gate installation in Clermont require an HOA review?
Yes, in most Clermont subdivisions it does. HOA architectural review in communities off US-27 and SR-50 often requires gate design and color approval before installation, and the 34714/34715 corridor’s gated communities have their own standards. Submit the spec sheet and elevation drawing first; we can provide both.
How long does gate installation take in Clermont?
A standard driveway gate installation takes one to two days on site, but Clermont’s sandy soil and sloped lots add time for deeper footings and leveling. Concrete needs curing days before automation is mounted. We give you a written schedule and price before any work starts. Call (866) 976-0095.
Brands We Service in Clermont
We work on Mighty Mule, LiftMaster, and FAAC systems specifically, along with the other major gate brands. Our Clermont trucks carry common control boards, safety sensors, and remote programming tools for these brands, which means we can often complete a repair in one visit instead of ordering parts and coming back. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Clermont, FL
| Service | Typical range in Clermont |
|---|---|
| Gate hinge replacement | $150 – $350 |
| Gate post repair | $300 – $800 |
| Welded gate repair | $250 – $600 |
| Gate opener repair | $200 – $500 |
| Gate opener installation | $1,200 – $4,000 |
| Manual driveway gate, installed | $2,800 – $9,000 |
| Automatic gate system, installed | $3,500 – $12,500 |
| Safety sensor replacement | $125 – $300 |
| Keypad and intercom replacement | $150 – $400 |
| Gate track replacement | $300 – $900 |
Clermont prices run toward the higher end of these ranges when the gate sits on a steep grade that needs post re-anchoring or when the sandy soil requires a deeper footing than standard. Every job is quoted and agreed before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Clermont
We cover all of Clermont’s residential and commercial areas, including the 34711, 34712, 34713, and 34714 ZIP codes. Most repair calls in the city get same-day or next-day scheduling.
- Downtown Clermont and the lakefront streets
- Subdivisions off US-27 and SR-50
- The 34714/34715 corridor gated communities
- Greater Hills and Hartwood Landing
- Clermont Chain of Lakes ridgeline homes
Service Area – Cities Near Clermont
Tampa Gate Company serves Clermont and the surrounding Lake County communities. We handle gate repair in Minneola, FL, gate work in Montverde, FL, Groveland, FL installations and repair, and Oakland, FL service calls within the same scheduling area.
Serving Clermont, FL — Our Local Coverage Area
We’re based in the Clermont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clermont
Most Clermont repair calls get a same-day or next-day visit, depending on where you are in the 34711 through 34714 ZIP codes and how our route runs that day. Emergency calls for a gate stuck open or closed get prioritized. Call (866) 976-0095 and we’ll give you a real arrival window.
For installation, usually yes. Most Clermont HOAs require a design review before a new gate goes in, and gated communities in the 34714/34715 corridor often have written gate standards. Repairs that match the existing gate typically don’t need approval, but checking your covenants takes five minutes.
Yes. We serve all four Clermont ZIP codes, from the lakefront streets downtown to the newer subdivisions off US-27 and SR-50 and the estates along the 34714/34715 corridor. The terrain and soil differ across the city, and our trucks are stocked for the gates common in each area.
If your gate is dragging, sagging, or not opening at all, call Tampa Gate Company at (866) 976-0095. We’ll quote the job before any work starts, and we’ll fix it right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clermont Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris