Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dade City, FL
Gate installation in Dade City, FL means working with ranch land, sandy soil, and older homes that each have their own idea of how a gate should sit. We install driveway gates on long county-road frontages, electric gate systems for rural properties off CR 52 and CR 301, and ornamental or chain-link walk gates closer to the historic downtown around 7th Street. Tampa Gate Company has served Dade City since 2013, and we know the difference between a post set in Myakka sand versus one anchored in limerock. If you’re planning a new gate or replacing one that’s reached the end of its life, call (866) 976-0095 for a free estimate.
Why Dade City Homes Are Different
Dade City sits in rolling sandhill ranch country, and that shapes every gate job we take on here. The older stock near the historic core, mostly 1920s and 1950s bungalows, has narrow post footings and low ornamental or chain-link gates that were built for a different era. Out along the county roads and toward San Antonio, you get wide driveway gates off long frontages, often welded tube steel or pipe rail, hung on posts that may have been set years ago with no concrete to speak of.
The soil is the real variable. East Pasco’s sandy, low-lying ground drains fast but doesn’t hold posts the way denser clay does. Intense afternoon thunderstorms and the occasional hurricane wind load push leaning and sagging into every gate that wasn’t anchored deep. In humid summers, hinges and operators seize with rust. Any new installation here needs to account for that from day one, not after the first wet season. That’s the difference between a gate that still swings clean five years later and one that drags a crescent into the sand.
Styles & brands we work with
Our Main Dade City Services
The two service pages below cover what Dade City homeowners and property managers call us about most often. Each page goes into local specifics for that job.
Gate Repair in Dade City
When a ranch gate off 301 starts dragging or a downtown walk gate won’t latch, the fix usually comes down to posts, hinges, or alignment. We work on welded steel, tube steel, chain-link, and ornamental hardware, and we repair first before recommending replacement. Dade City’s sand and humidity mean rust and post shift are common, so we check the full assembly rather than just the obvious symptom. For full details on what repair covers and what it costs locally, see Gate Repair in Dade City.
Electric Gate Repair in Dade City
Electric gate acting up? On Dade City ranch properties, the culprit is often a control board that took a lightning hit, a safety loop that’s no longer reading the induction field, or a motor that’s been working against a rusted hinge for months. We diagnose the motor, board, and safety loop, not just the obvious. LiftMaster and Mighty Mule systems are common out here. For specifics on brands, faults, and pricing, visit Electric Gate Repair in Dade City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dade City
Gate installation in Dade City means setting posts that will actually hold in sand or limerock ground, building a gate leaf that can take a summer thunderstorm without sagging, and on electric jobs, running the power and sensor wiring the way a future repair tech would want to find it. The older bungalows near downtown often need custom walk gates matched to existing fencing, while the ranch parcels out CR 52 and toward San Antonio call for wide driveway gates with openers built for daily use. A new gate here isn’t just a panel on two posts. It’s the first thing a visitor touches, and it has to survive East Pasco weather. For the full scope of what we offer, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing a wide driveway gate by hand multiple times a day, or you need controlled access for delivery drivers, ranch staff, or family members.
What it costs in Dade City
Automatic gate installation in Dade City typically runs $2,900 to $6,900 depending on gate width, motor type, and whether power already reaches the post.
How we do it
We set or reinforce the posts in concrete, hang and balance the gate leaf, mount the operator, then wire and program the motor, safety edges, and any keypad or remote controls.
Driveway Gate Installation
Signs you need it
Your driveway entrance is wide open to the road, or the existing gate is rusted, sagging, or too light for the wind load it faces on a county-road frontage.
What it costs in Dade City
Driveway gate installation in Dade City typically falls between $1,900 and $6,500 for a manual or automated setup, with welded steel and tube gates at the higher end.
How we do it
We measure the opening and drive path, set posts deep in concrete below the sand line, hang the gate to sit square, and then add an opener if the job calls for one.
Sliding Gate Installation
Signs you need it
A swing gate won’t work on your slope or set-back, or you’re tired of a leaf that scrapes the ground every time it opens after a hard rain.
What it costs in Dade City
Sliding gate installation in Dade City generally runs $2,700 to $6,000, with cantilever or track-style hardware changing the number.
How we do it
We pour or repair the concrete track base, set the end posts and receiver, build or mount the gate panel, and install and test the drive motor with the safety loops.
What Gate Installation Costs in Dade City
| Item | Typical range in Dade City |
|---|---|
| Basic manual walk gate | $450 – $900 |
| Driveway gate (manual, steel tube) | $1,900 – $4,500 |
| Automatic driveway gate with opener | $2,900 – $6,900 |
Do I need a permit for a new gate in Dade City?
Most residential gate installations in Dade City don’t trigger a permit unless the gate is automated and includes electrical work, in which case the power run and any access-control wiring need to be done to code. We’ll tell you in the estimate whether your job needs anything filed.
How long does a gate installation take in Dade City?
A standard driveway gate on good ground usually takes one full day for the posts and gate, with a second visit for the opener and controls on automated jobs. Sandy soil means we sometimes spend extra time setting posts in concrete to the right depth, which keeps the gate square for years.
Brands We Service in Dade City
We stock and install parts for the gate systems Dade City properties run most, including LiftMaster, Mighty Mule, FAAC, and BFT. On the gate hardware side, we work with the welded steel and tube gates common along county roads here, along with ornamental and chain-link stock. See our brands for the full list, including access-control and intercom gear. Because we’re a gate-only shop, we carry the boards, sensors, and arms that generalists special-order. That usually means a diagnosis and a fix on the first visit rather than a week waiting on a part that may or may not be right.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dade City, FL
| Service | Typical range in Dade City |
|---|---|
| Gate hardware repair (hinges, latch, alignment) | $160 – $400 |
| Post reset / welding | $240 – $650 |
| Electric gate diagnostic | $90 – $180 |
| Opener motor replacement | $420 – $1,000 |
| Control board replacement | $290 – $680 |
| Safety loop / sensor repair | $190 – $420 |
| Keypad / intercom / remote setup | $120 – $360 |
| Manual walk gate installation | $450 – $900 |
| Driveway gate installation | $1,900 – $6,500 |
| Automatic gate installation | $2,900 – $6,900 |
In Dade City, the two things that move a gate price most are post depth and automation. Sandy ground means we drive or pour posts deeper than a Tampa subdivision job would need, and any gate that has to read a vehicle loop or talk to a keypad costs more than a purely manual one. Every price above is quoted and agreed before work starts, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Dade City
We cover all of Dade City’s ZIP codes, 33523, 33525, and 33526, from the historic streets around 7th Street to the ranch parcels along CR 52 and CR 301 and out toward the San Antonio line. We’re on site in Dade City for repairs and estimates throughout the week.
- Historic downtown near 7th Street
- Ranch and equestrian properties off CR 52
- County Road 301 corridor
- Areas toward San Antonio
- Rural parcels in 33523 and 33526
Service Area – Cities Near Dade City
Beyond Dade City, we take gate work across the East Pasco area, including Saint Leo, FL just up the road, Pasadena Hills, FL to the west, San Antonio, FL next door, and Dade City North, FL. If your property sits in one of these nearby communities, the same crew and the same gate-only focus apply.
Serving Dade City, FL — Our Local Coverage Area
We’re based in the Dade City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dade City
We schedule Dade City repairs as soon as the same day or next day in most cases, depending on the existing route. Rural properties on the county roads may see a slightly longer window than homes near downtown, but we’ll give you a firm arrival window when you call.
For the small number of Dade City neighborhoods with gate or fence standards, we can match the required style and height and provide whatever documentation the HOA asks for. Rural parcels rarely have those restrictions, but we’ll always ask before quoting.
Most gates in Dade City are worth repairing if the posts are sound and the leaf is structurally intact. A rusted hinge, a loose operator, or a board that took a surge is a repair. A gate so rusted through that it flexes when you push it is a replacement. We’ll tell you which one you’re looking at and quote the repair honestly.
If your gate is sagging, dragging, or dead at the keypad, call Tampa Gate Company at (866) 976-0095. We’ll put a gate specialist on it, give you a free estimate, and fix it so it works right through the next hard summer.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dade City Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang