Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Boyette
When your electric gate stops responding in Boyette, you need a technician who knows the area’s gated communities off Boyette Road, not someone guessing at a control board from across the county. We’re Tampa Gate Company, and we work on electric gate systems throughout ZIP 33579 every week. Most Boyette calls come from planned subdivisions where the gate has failed on electronics or surge damage, not a rusted frame. Call (866) 976-0095 and you’ll talk to someone who can diagnose the problem over the phone before we dispatch.
Why Tampa Gate Company Is Boyette’s Preferred Electric Gate Repair Company
Boyette’s gated communities run on a specific mix of operator brands and access-control setups, and we see them enough to recognize the systems on sight. When a slide gate at a FishHawk-area entrance stops cycling, our technician already knows the likely failure points before opening the operator cover. That saves the HOA money on diagnostic time, and it gets the gate moving again faster.
We’re a gate-only shop. Our technicians don’t split their time between HVAC calls and pool pumps. Every diagnostic, every repair, every part order is focused on gate systems, which means we diagnose faster and fix it right the first time. Noel Carver runs our team, and he holds every technician to that standard. Boyette customers call us back because the repair actually holds up through the next summer thunderstorm.
We also know how Boyette’s HOA and CDD structure works. When a community manager needs a documented repair for the board, we provide a written report they can file. That matters in a master-planned area like this, where access control isn’t a personal luxury, it’s association infrastructure.
Styles & brands we work with





Electric Gate Motor in Boyette
An Electric Gate Motor in Boyette typically fails on the electronics long before the housing shows any sign of wear, thanks to near-daily summer lightning and humidity. A dead motor usually isn’t actually dead: it’s a fried control board, a blown capacitor, or a limit switch that gave out after a surge. A motor replacement in Boyette runs $450 to $1,100 depending on the operator brand and whether it’s a slide or swing system. Control board replacement lands lower, usually $200 to $450.
Surge-Related Motor Failure
Boyette’s afternoon thunderstorms send surges through gate operators that were never grounded well enough by the original builder. When a LiftMaster or FAAC board takes a hit, the motor itself often tests fine once the board is swapped. We always check the capacitor and limit switches at the same time, because a surge rarely damages just one component.
Builder-Grade Operator Limits
Many Boyette HOAs inherited operators the developer installed at the lowest bid. Those units work for a decade or so, then the limit switches drift and the motor overloads trying to compensate. We can often re-set limits and replace the switch for under $200, which beats a full operator replacement.
Gate Access Control in Boyette
Gate Access Control in Boyette means the keypads, RFID readers, intercoms, and safety loops that let residents in and keep everyone else out. When one of these fails, the gate either won’t open for anyone or sits open because the safety loop doesn’t sense a vehicle. A keypad replacement in Boyette runs $150 to $350. RFID reader installs run $200 to $500. Full access-control stack replacement for a community entry gate, when lightning takes out everything at once, runs $800 to $1,800.
Storm-Fried Access Stacks
We’ve seen a single afternoon storm knock out a control board, keypad, and RFID reader at the same community entrance. That’s why we diagnose the entire access stack, not just the obvious dead board. The same surge that killed the motor runs through the low-voltage wiring to everything else on the post.
HOA and CDD Documentation
Boyette community managers usually need a repair summary for their records before they’ll cut a check. We write up what failed, what we replaced, and what we recommend next, in plain language. That keeps your gate repairs moving without a board approval bottleneck.
Trusted Brands We Service in Boyette
We work on Mighty Mule, LiftMaster, FAAC, BFT, and most other operator brands found in Boyette’s planned communities. Because we’re a gate-only shop, our techs know the specific failure patterns of each brand. A Mighty Mule swing operator, for instance, tends to fail on limit switches first. A LiftMaster slide operator usually takes the surge on the control board. We stock common parts for these brands specifically because we know they’re the ones installed throughout the FishHawk-Boyette corridor. When your HOA’s operator needs a part we don’t have on the truck, we can usually source it same-day from our Tampa suppliers.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Boyette Homes
- Surge-damaged control boards. A lightning strike near Boyette Road doesn’t just trip the breaker; it sends voltage through the operator’s low-voltage side and kills the board. The motor often tests fine after we swap the board.
- Misaligned swing gates from shifting posts. Boyette’s sandy soil drains fast, and over a decade that lets hinge posts drift. A sagging swing gate grinds against the operator and burns out the motor.
- Keypads and RFID readers that die together. Because the access wiring shares conduit with the operator power, a surge that kills the motor also fries the entry devices. We check both before quoting anything.
- Builder-installed operators with no real maintenance history. Many gates in Boyette’s newer subdivisions have never had limit switches adjusted or safety edges tested since the developer handed over the keys. We find rollers worn flat and photo eyes caked with pollen.
Pricing for Electric Gate Repair in Boyette, FL
Electric gate repair in Boyette typically runs $150 to $1,800 depending on what failed and whether it’s a single-family driveway gate or a community entry system. A simple keypad swap starts around $150. A control board replacement runs $200 to $450. A full motor replacement lands between $450 and $1,100. A complete access-control stack replacement for a community entrance, which happens when lightning takes out the board, keypad, and reader together, runs $800 to $1,800. We quote the price before any work starts, and you approve it in writing. Call (866) 976-0095 for a free estimate on your specific gate.
We Also Serve Cities Near Boyette
Tampa Gate Company handles Electric Gate Repair throughout the FishHawk-Boyette corridor and surrounding communities. If you’re in Balm, Riverview, Gibsonton, or Bloomingdale, we cover those areas too. Our Electric Gate Repair in Boyette team knows the HOA-governed communities throughout ZIP 33579 and the surrounding planned developments.
Serving Boyette, FL — Our Local Coverage Area
We’re based in the Boyette area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Boyette
The keypad and motor share low-voltage wiring and conduit, so a lightning surge that hits the operator travels to every access device on the same run. We find this regularly in Boyette’s gated subdivisions, where one afternoon storm fries the control board, keypad, and RFID reader in a single strike. The fix is replacing the damaged components and adding surge protection so the next storm doesn’t do it again. Call (866) 976-0095 and we’ll diagnose the full stack.
Yes, and most of the time it’s the right call. The steel frame and track are usually fine; it’s the operator electronics and limit switches that fail repeatedly. We can retrofit a quality LiftMaster or FAAC operator onto the existing gate, usually in a day. The HOA saves thousands compared to a full gate replacement. Call (866) 976-0095 for an on-site assessment and written quote.
Yes, but it’s a retrofit project, not a motor swap. Many Boyette homes were built with manual gates and no conduit or power run to the post. We trench for power, set new post footings if needed, and install the operator and access control from scratch. It runs more than an operator replacement, but we quote the full scope before starting. Call (866) 976-0095 for a free measure and written estimate.
Shifting post footings in the sandy, fast-draining soil. Over a decade or two, the hinge post drifts just enough to throw the gate out of alignment, and then the operator works against the sag until the motor or gearbox fails. We fix the alignment, reset the limits, and replace the worn components in one visit. Call (866) 976-0095 to schedule a diagnosis.
Yes, we provide a signed repair summary for every community gate job. It lists what failed, what we replaced, what we recommend going forward, and the cost. Boyette HOAs and CDDs can file it for their records or board review. Call (866) 976-0095 and mention you need documentation for your community manager.
Call Tampa Gate Company at (866) 976-0095 for electric gate repair in Boyette. We’ll diagnose your gate, quote the repair before starting, and get your access back to secure working order. Estimates are free.
Written by Noel Carver, Owner at Tampa Gate Company, serving Boyette and the FishHawk corridor since 2009.