Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Eagle Lake
Electric gate repair in Eagle Lake typically runs $185 to $520 depending on whether you’re dealing with a failed control board, a dragging post, or a dead motor. We’re the gate-only crew that shows up with the right diagnostic tools and the right parts, not a handyman who’ll guess at the problem. If you’re off Eagle Lake Road North, down by the lake, or anywhere in the 33839 zip, call us at (866) 976-0095 and we’ll talk through what your gate is actually doing.
Why Tampa Gate Company Is Eagle Lake’s Preferred Electric Gate Repair Company
Eagle Lake homeowners call us because we recognize their gate on sight. A 1994 SwingMaster off Bomber Road. A Mighty Mule on a chain-link driveway gate off 7th Street. A FAAC swing arm on a pool enclosure near Lake McLeod. Our techs work on nine major brands, including LiftMaster, FAAC, BFT, Viking, and Mighty Mule, so we’re not standing in front of your gate reading a manual for the first time.
We’ve built our Eagle Lake reputation the slow way: showing up when we say we will, diagnosing the control board before quoting a motor replacement, and never telling a customer to replace a gate that can be repaired. That’s not marketing language. That’s how you keep customers on larger Polk County lots who compare notes with their neighbors.
Styles & brands we work with
Gate Opener Repair in Eagle Lake
Gate Opener Repair in Eagle Lake usually means one of three things: a motor that hums but won’t move the gate, a control board that won’t respond to the remote or keypad, or a safety sensor that trips the gate back open every time. After heavy rain, a fourth culprit shows up often around here: the post has settled and the opener is fighting a gate that’s dragging on the ground. We check all of it before quoting anything, so you’re not paying for a motor when the real problem was a hinge or a footer.
What We Check First
We start with the operator’s power supply, then test the motor with the gate disengaged from the chain or arm. That tells us within minutes whether the motor is dead or the gate itself is binding. On Eagle Lake lots with sandy soil, post settling is common enough that we test gate travel before condemning the opener.
Cost for Gate Opener Repair in Eagle Lake
Opener repairs in Eagle Lake typically land between $175 and $480, depending on whether the job is a gear replacement, a circuit board swap, or a full motor rebuild. When repair isn’t the right call, we’ll tell you straight and quote a replacement opener installed. The price you approve before work starts is the price you pay.
Automatic Gate Repair in Eagle Lake
Automatic Gate Repair in Eagle Lake covers the whole system: the operator, the control board, the safety loops, the remotes, the keypad, and the gate hardware itself. When a gate stops responding to a remote or opens halfway and stops, the issue is rarely just one component. Our technicians work through the system in sequence, so you’re not guessing which part failed.
Legacy Systems and Retrofits
A lot of Eagle Lake gates were installed in the 1990s and early 2000s, and those original control boards are now obsolete. When an old FAAC board dies, the operator itself may still be mechanically sound. We can sometimes retrofit a modern board and keep the rest of the system working, which is cheaper than replacing the whole operator. When the operator is too worn to justify a retrofit, we’ll show you the numbers and let you decide.
Safety Sensors and Photocells
Automatic gates built before UL 325 safety standards took full effect often lack the photocells and safety edges required today. A gate that reverses on contact but doesn’t stop before contact is a liability. We can add safety photocells to older swing and slide gates in Eagle Lake, bringing the system up to standard without a full replacement.
Trusted Brands We Service in Eagle Lake
We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, along with Linear, Viking, Ghost Controls, DoorKing, and Elite. That brand coverage matters in Eagle Lake because the city’s housing stock spans decades, and each generation of gate used different operators. The control panel on a 1998 FAAC swing arm is a different animal from a 2015 Mighty Mule. We know both. We stock repair parts for the most common operators that fail in Polk County, so turnaround is faster than ordering from a catalog and hoping.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Eagle Lake Homes
- Post settling after rain. The sandy soil around Eagle Lake drains fast, and after a summer downpour, gate posts can shift enough that the gate drags and the opener strains. We re-set the post in concrete and re-hang the gate so it travels cleanly.
- Corroded hinges and hardware. High humidity and sun exposure eat away at steel and wrought-iron hardware on older Eagle Lake gates. When a gate sags, the fix is often replacing worn hinge pins and rebuilding the post mount, not buying a new gate.
- Obsolete control boards. Gates installed before 2000 frequently run control boards that are no longer manufactured. When the board fails, the operator is dead, but the motor and gearbox may be fine. We can often retrofit a current board and keep the original system in service.
- Safety sensor failures. Photocells on older gates get misaligned, sun-damaged, or chewed by rodents. The symptom is a gate that closes halfway and reverses, or won’t close at all. We test and replace sensors before touching the motor.
Pricing for Electric Gate Repair in Eagle Lake, FL
Here’s what Eagle Lake customers tell us they want to know: a simple remote reprogramming or photo-eye alignment runs $85 to $180. A control board replacement runs $220 to $520 with labor. A gate motor replacement runs $380 to $900 installed, depending on the operator. A full post re-set, with concrete work and re-hanging, runs $250 to $650 per post depending on gate size and soil conditions. These are the ranges we’ve seen across Eagle Lake’s mix of 1970s ranches, manufactured homes, and newer builds on larger lots. Every job gets a written quote before work starts. We don’t spring surprise invoices at the end. Call (866) 976-0095 and we’ll give you a firm number.
We Also Serve Cities Near Eagle Lake
Our Electric Gate Repair team works across the area around Eagle Lake, including Jan-Phyl Village, Winter Haven, Wahneta, and Inwood. If you manage a rental property in Eagle Lake or a family home nearby, we can schedule service the same week in most cases.
Serving Eagle Lake, FL — Our Local Coverage Area
We’re based in the Eagle Lake area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Eagle Lake
In our experience on Eagle Lake’s sandy soil, the post is usually the culprit when a gate drags after rain. The soil around the post footer settles or washes out, the post tilts a few degrees, and the gate no longer travels level. The operator then strains against the added resistance, which can burn out a motor over time. We check post plumb and gate travel before condemning the opener. Call (866) 976-0095 for a diagnosis.
It depends on the failure. Many older LiftMaster and FAAC boards can be rebuilt or replaced with a retrofit board, keeping the original motor and gearbox in service. When the board is obsolete and no compatible retrofit exists, we’ll quote a replacement operator and show you why the numbers favor that route. We won’t tell you to replace a gate or operator unless repair isn’t the better answer.
Gate systems installed since 2000 are required to meet UL 325 entrapment protection standards, which include safety photocells or equivalent sensors and a reversing mechanism. If your 1990s gate lacks those, you’re running a liability risk, and a retrofit is cheaper than an injury claim. We add safety photocells to older Eagle Lake gates regularly, and the job usually takes under two hours.
The process starts with pulling the gate off the post and inspecting the hinge pins and the post itself. On larger lots where gates are heavier, hinge pins wear out faster, and the post may have shifted in sandy soil. We re-set the post in fresh concrete, replace worn hinge hardware, and re-hang the gate with the correct clearance. The result is a gate that swings freely and an operator that stops working overtime.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of operators installed on Eagle Lake driveways, pool enclosures, and commercial lots. If your gate has an older operator from one of these brands, we’ve likely worked on that model before. Call (866) 976-0095 with your brand and symptom, and we’ll tell you what’s involved.
Written by Noel Carver, Owner at Tampa Gate Company, serving Eagle Lake since 2010.