Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Gotha
Electric gate repair in Gotha, FL typically runs $185 – $450 for most opener, motor, and control board fixes, with same-week scheduling for non-emergency calls. We work on the acreage and equestrian properties that define Gotha’s 34734 zip code, where gates sit farther from the road and farther from the house than anything you’ll find in the tract subdivisions to the east. If your gate won’t open, sags at the hinge, or stopped responding after the last summer storm, call (866) 976-0095 and we’ll diagnose it properly.
Gotha is different from the Orlando suburbs around it. The lots are bigger. The driveways are longer. And a lot of the gate systems out here are older, harder-working, and more exposed to storm damage than the HOA gates you see in Windermere or Ocoee. That changes what breaks, and it changes how you fix it. We know the difference.
Why Tampa Gate Company Is Gotha’s Preferred Electric Gate Repair Company
We’re a gate company. Not a garage door company that also does gates, not a general handyman service with a gate tech on call. Every technician we send to Gotha works on gates full time, which means when we pull up to a property on a sandy stretch off Hempel Avenue or near the Gotha area’s horse properties, we already know what we’re looking at. That focus shortens diagnosis time and keeps the repair from turning into a guessing game.
Local reputation matters in a place like Gotha, where neighbors talk and word travels fast. The recurring feedback we hear from homeowners here is that we identify the actual failure instead of throwing parts at the problem. When a Viking opener quit on a horse-property driveway near Gotha after a summer storm, our tech found the real culprit: a leaning hinge post set in fast-draining sand, not the operator itself. We pulled and re-set the post footing, corrected the sag, replaced a water-intruded control box, and verified the safety photocell. The gate has cycled clean through every thunderstorm since.
For newer systems on the market, remember Electric Gate Repair on our service hub covers the full scope of what we diagnose, from control boards to safety loops. For Gotha specifically, the combination of sandy soil and mature oak canopy means we carry more post-footing hardware and storm-damage parts on our trucks than we would for a suburban run.
Noel Carver founded this company on a repair-first principle: fix what’s broken, replace only when repair isn’t the right call. That philosophy fits Gotha’s older housing stock, where a 1990s operator on a still-solid gate post doesn’t need to become a $4,000 replacement just because it’s old.
Styles & brands we work with





Commercial Gate Operator in Gotha
Commercial gate operator service in Gotha usually applies to the larger private entrances out here, the farm gates on equestrian properties, the workshop driveways off County Road 535, and the occasional small business or church property that needs controlled vehicle access. The job often involves heavy-duty operators, wide swing or slide gates, and power or solar considerations that a residential suburban gate never raises. A typical commercial operator repair in Gotha runs $350 – $900 depending on the operator class and whether we’re rebuilding a motor, swapping a control board, or replacing a damaged arm.
Wide Farm Gate Operators
Wide gates on acreage need heavier operators than a standard driveway gate. An operator rated for a 16-foot gate will burn out fast on a 24-foot farm gate. We check the gate’s actual weight and length, the post condition, and whether the operator is matched to the load. When posts lean in Gotha’s sandy soil, the operator has to work against a sagging gate every cycle, which shortens its life. Sometimes the fix is the post, not the motor.
Solar-Powered Commercial Systems
A commercial gate on a rural Gotha property often runs on solar because running 120V from the building is impractical. These systems use battery banks, charge controllers, and low-power operators, and water intrusion in the control box or corroded battery terminals are the two failures we see most in humid central Florida weather. We test the panel output, load-test the batteries, and replace what’s failed rather than selling a whole new solar kit.
Gate Opener Repair in Gotha
Gate opener repair in Gotha usually means diagnosing why a motor runs but the gate doesn’t move, why the gate moves but won’t close fully, or why the opener stopped responding to the remote or keypad entirely. Common causes on Gotha properties include corroded connections from humidity, damaged wiring from lawn equipment or storm debris, and burned-out capacitors on older swing-gate openers. Expect to pay $185 – $395 for most opener repairs on a residential gate, with parts extra when the board or motor is shot.
Swing Gate Opener Sag and Drag
Gotha’s sandy soil lets hinge posts drift, especially on older ranch-era gates with shallow footings. The gate sags, the opener strains, and eventually the motor or gear assembly fails. We check the post before the opener, because replacing the opener without fixing the post just means you’ll replace it again in two years. Re-setting a post and correcting the hang is often the real repair.
Remote and Keypad Failures
When the gate works from the keypad but not the remote, or vice versa, the opener itself is usually fine. We test the receiver board, reprogram remotes, and replace keypads or receiver modules as needed. The humidity and lightning-heavy storm season in central Florida corrode low-voltage connections faster than the dry heat you’d see out west, so we check every terminal and connector as part of the repair.
Trusted Brands We Service in Gotha
We work on Viking, Ghost Controls, and DoorKing systems specifically, along with the rest of the major operators you’ll find on Gotha properties. Viking and Ghost Controls are common on residential and light farm gates out here. DoorKing shows up on older commercial and estate entrances. Because we service these brands daily, we recognize the failure patterns on sight and keep the most common boards, remotes, and sensors on hand for Gotha customers, which keeps turnaround shorter than waiting on a shipped part.
Common Electric Gate Repair Problems We See in Gotha Homes
The problems we see in Gotha don’t match what we see two miles east in Windermere. Here’s what recurrently sends Gotha homeowners to us:
- Gate sags and drags before the opener fails. Hinge posts set in sandy soil lean over years, so the gate’s free end drops and the opener works harder every cycle. The opener often isn’t the first problem, it’s the post.
- Oak and sand-pine limbs strike gate arms after storms. Gotha’s mature trees shed limbs in summer thunderstorms, and a 12-foot branch landing on a gate arm bends it or knocks a slide-gate track out of line. We straighten or replace arms and re-align tracks.
- Solar opener batteries and control boxes take on water. Rural gates that run on solar are exposed to year-round humidity and lightning-heavy weather. Corroded battery terminals and water inside the control box are the most common reasons a solar gate goes dead.
- Older mid-century and ranch-era operators finally quit. Much of Gotha’s housing stock dates back decades, and many gates still run on early automatic openers that are past their service life. We repair what’s viable and give you an honest replacement number when it isn’t.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Gotha, FL
The price you’re quoted is agreed before we start work, and it doesn’t change unless we find something that needs a new part and you approve it first. Here’s what Gotha homeowners should budget:
- Basic opener repair (capacitor, limit switch, remote reprogramming): $185 – $295
- Control board replacement: $275 – $400
- Gate motor replacement: $350 – $650
- Safety sensor or photocell replacement: $150 – $250
- Post re-setting and sag correction: $250 – $550 depending on footing depth and hardware
- Solar battery bank replacement: $180 – $350
- Commercial or heavy-duty operator repair: $350 – $900
The labor rate and parts prices don’t shift based on which side of the Orange County line you’re on, but the failure types do. A sagging post costs less to fix than a motor burned out by years of strain on that same sagging post. Estimates are free. Call (866) 976-0095.
We Also Serve Cities Near Gotha
We serve Gotha and the surrounding west Orange County communities, including Orlovista, Bay Hill, Windermere, and Ocoee. If you’re just outside the 34734 boundary, ask and we’ll likely cover it. For more detail on our local coverage, see Electric Gate Repair in Gotha or call us directly.
Serving Gotha, FL — Our Local Coverage Area
We’re based in the Gotha area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Gotha
Yes. If your gate already runs on solar, we repair the panel, charge controller, battery bank, and operator just like any hardwired system, which is almost always cheaper than trenching 200 feet of 120V line. If your gate is hardwired and you’re asking whether to convert to solar to avoid trenching, we can quote both options and give you an honest recommendation. Call (866) 976-0095 and describe your current setup.
The opener isn’t the problem, the post is. Gotha’s sandy soil lets hinge posts drift over years, and a heavy gate hanging on a leaning post will sag regardless of what operator is bolted to it. We re-set the post, correct the hang, and then the opener gets to work at the load it was designed for. Skipping the post repair just burns up the next opener.
Usually the arm itself, sometimes the operator’s drive assembly if the impact transferred through the arm. We also check the post for knocked-out-of-square movement and the track if it’s a slide gate. Get the arm replaced fast because a bent arm will strain the motor and turn a $200 part swap into a $600 motor replacement.
Under Florida law, automated gates must comply with UL 325 entrapment protection standards, which means proper safety sensors, edges, or a Type A inherent sensing system. Most newer operators have this built in. If your gate is older or was pieced together over the years, we can bring it into compliance during a repair so nobody on the property gets pinned when the gate closes.
Yes. We service heavy-duty operators on wide farm gates regularly, including solar-powered systems. The key checks on a wide gate are the operator’s duty rating versus the gate’s actual weight and the post condition, because a heavy gate on sandy Gotha soil shifts everything. We’ll tell you honestly whether the operator is right-sized for the gate or whether you’re fighting a mismatch.
Call Tampa Gate Company for Electric Gate Repair in Gotha
When your gate goes down, security and access go with it. A gate that won’t close leaves your property open to whatever comes down the driveway. A gate that won’t open traps your truck, your horses, or your morning apart. We understand that urgency, and we handle it directly: a real diagnosis, an upfront price, and the repair done before the next storm. Noel Carver and the team at Tampa Gate Company are ready for your call. Reach us at (866) 976-0095 for a free estimate.
Written by Noel Carver, Owner at Tampa Gate Company, serving Gotha since day one, working on gates, and only gates, the whole time.