Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Placid
A broken electric gate in Lake Placid usually means one of three things: a dead opener battery, storm-shifted posts, or corroded hinges from months of humidity. For Ghost Controls in Lake Placid, we handle those same issues with the same same-day service. We fix all three, same visit in most cases. Tampa Gate Company is a gate-only specialist serving the 33852 and 33862 corridors, from the residential streets east of Lake June to the rural ranchettes out toward Lorida. If your gate won’t open, sags after the summer rains, or died while you were up north, call Noel Carver’s team at (866) 976-0095. We diagnose the operator, board, and safety loop, not just the obvious.
Why Tampa Gate Company Is Lake Placid’s Preferred Electric Gate Repair Company
Lake Placid gate work is a narrow specialty. Most of what we see are owner-installed or custom tube-steel and chain-link gates on large sandy lots, paired with aging openers that weren’t designed for Highlands County humidity. Generalist handyman services guess at these systems. We recognize the hardware on sight, and we stock the parts for it.
Noel’s team has repaired gates on both sides of Lake Placid: off CR 621 near Placid Lakes, along Main Avenue properties with older iron swing gates, and far out 33862 where pasture gates and long driveway slide gates dominate. The work there is different from Tampa suburb gates. Posts sit in sandy soil that shifts after heavy rain. Panels take direct hurricane-season wind. It’s a peculiar failure pattern, and it’s one this area shares with Lake Placid more than any other Highlands County town.
We’re a dedicated Electric Gate Repair contractor, not a multi-trade shop doing gates on the side. That singular focus shows up in faster diagnosis and repairs that hold through next year’s storm season. Reviews from Lake Placid customers consistently mention the same two things: the technician knew the exact operator model, and the gate was back working that afternoon.
Styles & brands we work with
Electric Gate Motor in Lake Placid
Electric gate motor repair in Lake Placid most often comes down to two culprits: moisture intrusion through a cracked housing seal and dead or dying backup batteries on gates that sat unused for months. On part-time properties around Lake Placid and the 33862 corridor, batteries drain over a long summer and fail right when the owner arrives in October. The motor itself may be fine. We test the board, the transformer, and the battery draw before recommending any part replacement.
A typical electric gate motor repair in Lake Placid runs $185 – $420 depending on whether it’s a battery swap or a board and motor replacement. We work on Mighty Mule, LiftMaster, FAAC, and BFT operators specifically, which covers the majority of residential and ranch gate systems in this area. For solar-charging openers on rural pasture gates, the diagnostic is different: we check panel output first, because a shaded or dust-covered panel on a sandy lot produces the same symptom as a failed motor.
Motor diagnostic and board work
When an opener responds weakly or not at all, we load-test the board and the motor separately. FAAC and BFT boards fail quietly after repeated voltage dips during storm-season power flickers. LiftMaster operators on the rural perimeter of Lake Placid often show corroded terminal blocks long before the board itself dies.
Battery and solar charging on part-time properties
Snowbird-season gate failures are rarely the motor. Usually it’s a battery that sat at zero charge for four months. We test, replace, and set the operator to float properly, then check the solar regulator if the gate runs off-grid.
Gate Access Control in Lake Placid
Gate access control in Lake Placid spans keypad entry, intercom loops, and safety sensors on electric gates that protect homes and small ranch parcels. Most systems here are simpler than what you’d find at a Tampa HOA: a keypad, a couple of remotes, one safety edge or photo-eye pair. But the humid subtropical climate and seasonal vacancy cause failures that don’t show up on a spec sheet: corroded keypad terminals, sun-degraded remote fobs, and spider webs inside photo-eye housings after months of disuse.
Access control repairs in Lake Placid typically run $120 – $340 for keypad replacement or sensor realignment, and up to $600 when a control board or full keypad-intercom retrofit is needed. We diagnose the control loop end to end, because a gate that only opens from the house keypad but not the driveway keypad is almost never a keypad problem. It’s a loop or receiver problem, and chasing the wrong part wastes a trip.
Keypads and remote programming
We repair and reprogram most keypad brands, including DoorKing and Linear, which are common on older Lake Placid gates. When a keypad fails after a storm, it’s usually water in the enclosure, not a dead pad. We reseal the housing and replace the contacts rather than selling a whole new system.
Safety sensors and entrapment protection
Safety edges and photo-eyes on automatic gates in Lake Placid take a beating from wind-driven rain and the sandy grit that blows up off dry lots. We realign, replace, and test entrapment protection on every call. This is not optional hardware on an automatic gate, and it’s part of every repair we do.
Trusted Brands We Service in Lake Placid
We service the brands that actually show up on Lake Placid gates. Mighty Mule on rural pasture gates and budget driveway openers. LiftMaster and FAAC on residential and ranch entrances. BFT on older custom swing gates around the lakes. Because we’re a gate-only shop, we carry common boards, remotes, photo-eyes, and batteries for these systems, so most Lake Placid repairs don’t wait on a shipped part. If your opener isn’t one we stock, we order from the manufacturer with the correct part number the first time.
Common Electric Gate Repair Problems We See in Lake Placid Homes
- Wind-racked solid infill gates. Hurricane-season gusts twist solid sheet-metal or wood-infilled swing gates and pull hinge posts out of saturated sandy ground. The panel then drags or won’t latch. We reset posts, realign hinges, and brace the gate frame where wind load is the root cause.
- Dead operator batteries after months up north. A gate that worked fine in April won’t respond in November. Backup batteries drain during vacancy and never recover. We test on arrival and replace batteries before condemning a motor.
- Corroded hinges and latches on humid, shaded properties. Lake Placid’s high summer humidity and afternoon downpours sieze gate hinges on older manual and electric gates, especially under dense oak canopy near Lake June and Lake Placid’s western shore. We free, replace, and grease with a marine-grade compound that holds up to the wet season.
- Cracked wood panels and dried seals on rural driveway gates. Dry spring sun splits wood gate panels and shrinks weather seals on long-run driveway gates. Water then gets into the operator housing and shorts the board. We rebuild panels and replace seals before the operator fails.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lake Placid, FL
Most Lake Placid electric gate repairs fall between $150 and $650. A keypad replacement or photo-eye realignment sits at the lower end, around $120 – $340. Gate motor repair, including battery, transformer, or board work, usually runs $185 – $420. Rebuilding a storm-shifted post or replacing a full operator with custom bracket work lands between $550 and $900 on rural lots where posts sit deep in sandy soil and require concrete reset. Every job is quoted and agreed before work starts, and estimates are free. Call (866) 976-0095 for an exact number on your gate.
We Also Serve Cities Near Lake Placid
Tampa Gate Company routes regularly to Electric Gate Repair in Lake Placid and the surrounding Highlands County towns. If you’re outside Lake Placid proper, we also serve Sebring, Avon Park, Zolfo Springs, and Frostproof. Rural ranch gates and long driveway entries in these towns see the same storm and humidity failures, and we carry parts for each stop.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Placid
Every automatic gate operator has a manual release, usually a pull handle or a keyed release switch on the operator itself. Disengage it and push the gate open by hand. Don’t force a solid-infilled gate against a wind-racked post; if it binds, call us rather than bending the frame. We can walk you through the release over the phone at (866) 976-0095 and then schedule the repair so the gate closes and locks again.
Sag comes from posts shifting in saturated sandy soil. Lake Placid’s soil drains fast, but heavy summer storms saturate the upper layer and a heavy gate with solid infill puts enough leverage on the hinge post to tilt it. On older or owner-set posts without deep concrete footings, the gate drops at the latch end. We reset the post, pour a deeper footing, and realign the hinges so the gate swings true.
Call us before you arrive. We’ll test the opener battery, cycle the gate, check for seized hinges, and inspect the safety sensors and keypad so the gate works the day you get back. A pre-season gate check in Lake Placid runs $95 – $150 and catches a dead battery or storm-shifted post before the gate is your only way in. Seasonal residents around the 33852 ZIP book these in October and November.
Yes. We service Mighty Mule and other solar-charging openers on ranch and pasture gates throughout the 33862 Lake Placid/Lorida corridor. Solar-system failures here are usually panel-related: dust from dry sandy lots, tree shade, or a charge controller that stopped passing current. We test the full charging loop, not just the battery, and we match the panel and regulator to the opener’s draw.
Yes. Automatic gates in Florida must have entrapment protection: safety photo-eyes, a reversing edge, or both, depending on the operator and gate type. We test and restore entrapment protection on every automatic gate repair in Lake Placid, and we won’t leave a gate operational without it. If your gate is missing or bypassing its safety loop, call (866) 976-0095 for an inspection.
Call for Electric Gate Repair in Lake Placid, FL
If your gate sagged after the rains, died over the summer, or won’t open after a storm, call Noel Carver’s team at (866) 976-0095. We serve all of Lake Placid, including 33852 and the rural 33862 corridor, with free estimates and upfront pricing on every repair. Your gate secures your property and controls access. We’ll get it back to working order.
Written by Noel Carver, Owner at Tampa Gate Company, serving Lake Placid since the company’s founding.