Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Brandon
A gate that will not open in Brandon is not a minor annoyance. It locks you out, leaves the property exposed, or traps your car in the driveway. That is a security problem and an access problem. We fix it. Tampa Gate Company repairs electric and manual gates in every Brandon ZIP: 33508, 33509, 33510, and 33511. Our techs know Bloomingdale, Valrico, and the HOA corridors off Brandon Blvd before they even turn the truck on. If your community entry gate is down or your driveway gate is sagging, call Gate Repair specialists at (866) 976-0095 for a free estimate. We work on LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
Why Tampa Gate Company Is Brandon’s Preferred Gate Repair Company
We are a gate company. Not a general home-services shop that sends the same tech to fix an AC unit one day and a gate the next. Every technician we send to Brandon works only on gates. That focus means when we see a Viking swing operator hanging off a post in a Brandon subdivision, we know the model and what typically fails on it. When a DoorKing slide gate stops halfway on a shared driveway, we know to check the rack, the board, and the safety loop. That is why HOA boards and property managers off Lumsden and Lithia-Pinecrest call us first.
Noel Carver, owner of Tampa Gate Company, started this business because homeowners were tired of generalists guessing. Our Brandon customers tell us the same thing: the last company replaced a hinge when the board was fried. Or they waited a week for a part that had to be special ordered. We stock parts for the nine brands we service, and when a Brandon customer needs a LiftMaster control board or a FAAC photocell, we usually have it on the truck or back at the shop. You get a specialist who diagnoses the actual problem, not someone who guesses and hopes.
Styles & brands we work with
Metal Gate Repair in Brandon
Metal Gate Repair in Brandon most often means one of two jobs: a sagging steel swing gate dragging on a shared driveway, or a slide gate that will not slide. Brandon’s housing stock was built mostly between the 1970s and 2000s, and the original gates are now 20 to 30 years old. We see hinge posts rusted at the base, operators with stripped gears, and steel panels pitted from Central Florida humidity. A typical metal gate repair in Brandon runs $180 to $420 for hinge and post work, and $250 to $600 when the operator or board needs replacing.
Hinge, Post, and Gate Realignment
When a steel gate sags and drags, the panel is usually fine. The hinge post has shifted or the welded hinge has let go. We cut, reinforce, and re-weld the hinge, or reset the post in fresh concrete so the gate swings true again. Doing it wrong means the operator works harder, burns out, and you are back to square one in six months.
Swing-to-Slide Retrofits
Many Brandon driveways are too tight for a swing gate that was developer-spec’d decades ago. A slider uses about half the clearance. We replace the old swing hardware with a rack and pinion and a slide operator that fits the existing opening, and suddenly the gate works without blocking the walkway or the neighbor’s fence.
Wood Gate Repair in Brandon
Wood Gate Repair in Brandon is common on smaller ornamental entry gates and pool safety gates. Central Florida’s humid subtropical weather is rough on wood: summer downpours soak the boards, the sun bakes them, and the cycle repeats. Hinges pull loose, the frame sags, and the gate drags on the pavers or the pool deck. Most wood gate work in Brandon falls between $140 and $340, depending on whether we are replacing boards, rebuilding the frame, or rehanging the whole gate on new hinges.
Frame Rebuild and Rehanging
We pull the fence post or rebuild the gate frame with pressure-treated lumber and galvanized hardware. Then we rehang the gate so there is a clean gap at the latch. The goal is a gate your kids can open with one hand, and a latch that actually catches.
Pool Gate Safety Repairs
Brandon homes have a lot of pools, and the code-required self-closing, self-latching pool gate takes daily abuse. Rusted gate springs and broken closers put it out of compliance. We replace the spring, the latch, and the hinges so it closes on its own from any position. Your family’s safety is not a place for a guess.
Trusted Brands We Service in Brandon
We carry parts and have real field time on the operators that show up on Brandon community gates. DoorKing and Viking are everywhere in the 1990s HOA subdivisions, and Ghost Controls systems keep popping up on newer slide-gate retrofits. Elite is another one we see on private driveways. We do not send your board off to a third party. We diagnose on site, and when we can, we repair it in the truck. If your HOA gate runs a brand nobody else wants to touch, call us first. We will know what it is.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Brandon Homes
- Lightning-fried control boards on HOA entry gates. After a summer thunderstorm rolls through Bloomingdale or Fish Hawk, shared gate operators stop working. The lightniing hits the board or the safety photocell, and now six houses share one broken gate.
- Rust and corrosion from the wet season. Heavy summer downpours, high humidity, and intense sun rust operator chains, hinges, and rack and pinion on steel perimeter gates. Grease turns to paste, and the gate makes a grinding noise on every open.
- Sagging swing gates on tight driveways. Older Brandon subdivisions were built with short setbacks, so a swing gate barely fits the driveway. Twenty years of that gate dragging scrapes the concrete and kills the operator. Slide-gate retrofits fix it permanently.
- Failed safety loops at community gates. A bad loop detector keeps the gate from closing, or worse, closes it on a car. We test the loop, find the break, and get the gate back to logic. The HOA board gets a repair summary, and residents get their gate back.
Pricing for Gate Repair in Brandon, FL
Real numbers, not vague promises. A hinge-and-post metal gate repair in Brandon runs $180 to $420. Wood gate frame rebuilds and rehangs land between $140 and $340. Electric gate diagnosis and operator repairs start around $250 and go up to $600 when a control board fails. If a full slide-gate retrofit is the right call, we quote the entire job before any work starts, and we review every line item with you. HOA boards get the same written price. You are never committed until you approve the number. Call (866) 976-0095 for an exact quote on your gate in Brandon. Estimates are free.
We Also Serve Cities Near Brandon
Our gate repair routes run through all of Brandon and the surrounding yards. We respond to Valrico, Mango, Bloomingdale, and Fish Hawk, usually on the same schedule as a Brandon call. If you are in one of these communities with a shared HOA gate or a private driveway gate that will not open, call Brandon‘s gate team at (866) 976-0095 and we will put you on the route.
Serving Brandon, FL — Our Local Coverage Area
We’re based in the Brandon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Brandon
After a lightning strike, it is usually the control board or a safety photocell, not the motor itself. We test the board, the loop detector, and the photocells to pinpoint it. In HOA communities off Lithia-Pinecrest we make this diagnosis on site and give the board a written cost before any work starts. Call (866) 976-0095 for an exact diagnosis.
Yes. We keep one lane of resident traffic open on every shared driveway job, which means we work on the gate in sections and communicate which side we are on. For a slide gate, that means the panels stay separated while we replace the rack and operator. The residents get in and out, and the work still gets done.
Ninety percent of the time we fix the post, not the panel. The panel is sagging because the hinge post has shifted in the soil or the welds have broken. We reset the post, re-weld, and re-hang the gate so it swings or slides clear. Repairing only the panel would leave the underlying problem in place.
We do it all the time. Gates off Brandon Blvd and Lumsden are shared assets, and one repair touches every homeowner on the street. We give your board a written diagnosis, a quoted price, and a clear schedule. You approve the work, and we turn the gate back over to you tested and working, with a summary of what was replaced.
The most common on 1990s and 2000s HOA entry gates are DoorKing, Viking, and Elite. For slide-gate retrofits and newer installs, we see Ghost Controls. We stock parts for all of them, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Call (866) 976-0095 and we will identify your operator by the model plate before we drive out.
Written by Noel Carver, Owner at Tampa Gate Company, serving Brandon, FL and the surrounding Hillsborough County communities.