Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Tampa?
Gate repair in Tampa typically runs $150 to $850 for most residential fixes, with the average landing around $300 to $450. Simple hardware problems like a dragging gate, a broken hinge, or a misaligned latch often come in under $250, while electric gate repairs involving a control board, motor, or safety loop usually fall between $350 and $850. Commercial and heavily automated systems can run higher, especially when access-control components are involved.
We’re Tampa Gate Company, and gates are the only thing we work on. When we pull up to a property in South Tampa, Westchase, or Channelside, we’re not guessing at your system. We recognize the brand, we know the parts, and we can tell you what the gate repair should cost before we start. That focus is why our pricing stays honest: we repair first, and we only recommend replacement when repair genuinely isn’t the right answer.
Key Takeaways
- Most residential gate repairs in Tampa cost $150 to $850.
- Electric gate repairs (motor, board, safety sensors) are the biggest cost drivers.
- Brand matters: we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
- Coastal salt air and Tampa’s summer storms shorten gate hardware life more than most homeowners expect.
- Free estimates: call (866) 976-0095 for an exact quote on your gate.
Gate Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Tampa market. These are real ranges for common repairs, not made-up averages. Your exact price depends on the system and the parts, which is why we always confirm on a free estimate.
| Repair Type | Typical Cost Range | What’s Included |
|---|---|---|
| Hinge, latch, and hardware repair | $150 – $300 | Replacing or adjusting hinges, latches, rollers, and manual gate hardware |
| Gate alignment and sagging fix | $175 – $400 | Realigning a dragging or sagging gate, tightening posts and hardware |
| Electric gate motor repair | $350 – $750 | Diagnosing and repairing the operator motor, gearing, and drive components |
| Control board replacement | $400 – $850 | New or repaired control board, reprogramming, and testing |
| Safety sensor / safety loop repair | $200 – $600 | Replacing or repairing safety sensors, photo eyes, and in-ground loops |
| Keypad / intercom / access control | $250 – $700 | Repairing or replacing keypads, intercoms, and entry access components |
| Track and roller repair (sliding gates) | $200 – $550 | Straightening or replacing track, replacing rollers, realigning the gate |
What pushes a repair up or down? Three things matter most. First, the system type: a manual swing gate with a worn hinge is a quick fix, while an automated sliding gate with a failing control board takes more diagnosis and more expensive parts. Second, brand and part availability: we keep strong knowledge of the nine major brands we service, so we’re not ordering blindly, but some control boards and operators cost more than others. Third, condition: a gate that’s been dragging for a year usually needs more than just the original part replaced. We walk you through all three on site before you commit to anything.
If you want to understand the full range of what we fix, our Gate Repair in Tampa page covers every job type, from manual hardware to fully automated access systems.
What Affects Gate Repair Pricing in Tampa
Tampa isn’t a generic market, and gate pricing here reflects that. A few local factors move the number more than people realize.
- Salt air and coastal humidity. In neighborhoods like Davis Islands, Bayshore, and Apollo Beach, salt-heavy air corrodes hinges, rollers, and metal hardware faster than inland homes. That corrosion often turns a simple hardware swap into a longer repair.
- Seasonal storms and flooding. Tampa’s summer storms and occasional flood events stress in-ground safety loops and low-mounted operators. A loop that’s been waterlogged or a motor housing that took on water costs more to fix than a dry-system fault.
- System type: manual vs. electric. Electric and automated systems involve control boards, safety sensors, keypads, intercoms, and access-control components, each of which adds cost and diagnosis time. Manual gates stay cheaper to repair.
- Brand and part cost. The nine brands we service (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule) each carry different part pricing. We work on all of them specifically, so we know which repairs are straightforward and which need a pricier board or operator.
- Gate size and weight. A large driveway gate or a heavy commercial swing gate needs heavier hardware and more labor than a small pedestrian gate. Weight also wears parts faster, so repairs come up more often.
- Commercial vs. residential. Commercial properties with high-traffic access control need more robust parts and often more diagnostic time than a single-family home.
The good news: because we’re a gate-only specialist, we diagnose faster and get the right part the first time. That focus keeps the total bill lower than a generalist who’s guessing at your system. If you’re comparing us to a multi-trade shop, that difference in diagnosis speed is often where the real savings show up.
How to Save on Gate Repair
You don’t need to spend top dollar to get your gate back to secure, working order. A few practical moves keep the number down.
- Get an estimate before work starts. We offer free estimates, so you’ll know the range before anyone touches the gate. Call (866) 976-0095 and we’ll walk you through it.
- Fix small problems before they grow. A dragging gate or a loose hinge is a $150 to $300 fix. Left alone through a Tampa storm season, it can turn into a bent track or a burned-out motor that costs several times more.
- Repair before replacing. This is core to how we work. We repair first and only recommend replacement when repair genuinely isn’t the right answer. Many gates that other shops want to replace just need the right part and a proper alignment.
- Address corrosion early. If you live near the water, have hardware checked before salt corrosion eats through it. Catching it early saves the cost of replacing hinges, rollers, and mounting hardware all at once.
- Know your brand. Telling us whether your gate is a LiftMaster, FAAC, BFT, or another system when you call helps us come prepared, which shortens diagnosis time.
- Bundle related repairs. If your safety sensor and keypad are both acting up, fixing them in one visit saves a second trip charge.
We don’t inflate the estimate to push a replacement. If a repair makes sense, that’s what we recommend. You’ll get a clear number and an honest call on whether fixing or replacing is the smarter move for your gate.
FAQs – Gate Repair Cost
How much does gate repair cost in Tampa?
Most gate repairs in Tampa cost $150 to $850, with a typical job around $300 to $450. Manual hardware fixes are usually under $300, and electric gate repairs involving a motor or control board run higher, from about $350 to $850. Call (866) 976-0095 for an exact quote, and estimates are free.
Is it cheaper to repair or replace an electric gate?
Repair is almost always cheaper than replacement, and in most cases it’s the right call: a motor or board repair runs $350 to $850, while a new automated system costs several times that. We always repair first and only recommend replacement when the gate or operator is genuinely beyond saving. Call (866) 976-0095 and we’ll tell you honestly which way makes sense.
How much does electric gate repair cost in Tampa?
Electric gate repairs in Tampa typically run $350 to $850, depending on whether the problem is a motor, a control board, a safety loop, or an access-control component. Motor repairs tend to sit in the lower half of that range, while control board replacement and safety loop repairs sit higher. Call (866) 976-0095 for a free estimate on your specific system.
Can you come out today?
We prioritize getting to you quickly because a broken gate is an access and security problem, not a minor inconvenience. Availability depends on the day and the job, so the fastest way to find out is to call (866) 976-0095 and we’ll give you the soonest window. Estimates are free.
Why does my gate cost more to repair than my neighbor’s?
Repair cost depends on your system type, brand, and condition, so two gates on the same street can price very differently. An automated system with a control board fault costs more than a manual gate with a worn hinge, and a gate that’s been sitting through salt corrosion or storm damage needs more work. We service all nine major brands and can diagnose your specific gate on site. Call (866) 976-0095 for a free, no-pressure estimate.
Whichever brand your gate runs on, the path to a fair price is the same: a specialist who recognizes your system, an honest repair-first recommendation, and a number you agree to before work begins. That’s how we operate at Tampa Gate Company, whether you’re in Hyde Park, Brandon, or anywhere across the Tampa area. For the full picture of our repair work, explore our home page, then call us when your gate needs attention.
Your gate protects your property and controls who comes and goes. Getting it working right shouldn’t mean guesswork or a padded bill. Call (866) 976-0095 for a free estimate, and we’ll get your gate back to secure, working order.
Pricing reflects the Tampa market as of 2026. Tampa Gate Company offers free estimates – call (866) 976-0095.
Written by the team at Tampa Gate Company, serving Tampa since 2015.
What Our Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer