Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Edgewood
If your driveway or pool gate won’t open, sags, or has come off its hinges in Edgewood, we can get it fixed. A broken gate in this part of Orange County isn’t something to put off – it’s a security gap and a safety issue, especially with pool enclosures. Our Gate Repair team works on manual and electric systems throughout Edgewood’s 32890 zip code, and we’re familiar with the tight lot lines and older housing stock that make repairs here different from the wide open subdivisions further out. Call (866) 976-0095 for a free estimate. We quote the price before any work starts, and you approve it first.
Why Tampa Gate Company Is Edgewood’s Preferred Gate Repair Company
We’re a gate-only shop, not a general contractor that also happens to look at gates. That matters in Edgewood because the homes here are mostly single-family detached builds from the 1950s through the 1990s, with a lot of original wood driveway gates and older pool safety gates. A generalist who sees one gate a month will guess at the problem. Our technicians see Edgewood’s specific failure patterns every week – rotted hinge posts in sandy soil, warped wood panels after heavy rains, and seized latches from humidity.
Noel Carver leads our team, and he’s built the company around one principle: diagnose accurately, repair first, and only recommend replacement when repair genuinely isn’t the right answer. That’s why Edgewood homeowners and property managers keep calling us back. We handle electric gate operators, welded steel frames, and everything in between, so we’re ready for whatever your gate throws at us.
Styles & brands we work with
Driveway Gate Repair in Edgewood
The first sentence here grounds the page: Driveway Gate Repair in Edgewood usually involves correcting what the climate and soil have done to an older gate – rotting posts, sagging panels, or hinges that bind after heavy rain. We see these problems constantly on the single-family lots around Edgewood, where many gates are original to 1970s and 1980s construction and sit on posts set in Central Florida’s loose, sandy soil. A typical driveway gate repair in Edgewood runs $180 – $340 for hinge replacement and realignment. More involved work, like digging out a rotted post and setting a new footing with a galvanized post, runs $400 – $650.
Post Replacement and Footing Work
When a gate sags and drags, the problem is almost never the panel itself. It’s the post. Edgewood’s sandy soil drains fast but doesn’t hold posts firmly through wet-dry cycles. We dig out the old footing, set a pressure-treated or galvanized steel post in concrete, and rehang the gate so it clears the ground through its full swing. This is the repair that actually lasts.
Gate Realignment and Hinge Repair
Hinges in Edgewood take a beating from humidity and afternoon thunderstorms. They corrode, the screws wallow out, and the gate drops. We replace hinges with galvanized or stainless hardware sized for the gate’s weight, then realign the gate on its posts. Expect to pay $140 – $280 for typical hinge replacement on a single driveway gate.
Gate Welding in Edgewood
Gate Welding in Edgewood is a frequent call for us because so many metal gates here are steel tube frames with infill panels that rust at the welds. The year-round humidity and summer storm season means surface rust is nearly guaranteed on unprotected steel. A typical weld repair on a residential gate in Edgewood runs $120 – $260 per repair point, depending on the thickness of the metal and whether we’re reinforcing a failing joint or patching a crack. Full structural reinforcement of a rusted frame section runs $350 – $550.
Weld Repair and Reinforcement
When a weld cracks on a gate frame, the gate starts flexing and the whole structure works loose over time. We grind out the failed weld, repair the joint, and add gusset plates where the frame needs reinforcement. The goal is a gate that doesn’t flex when you push on it – flex is what eventually breaks hinges and tears frames apart.
Rust Remediation Before Repair
On the metal gates around Edgewood, especially older pool and driveway gates, we often have to address rust before we can weld. That means grinding the affected area to clean metal, treating the surrounding steel, and then laying a proper weld. Welding over rust just moves the failure point. If the gate is too far gone, we’ll tell you honestly and give you a replacement price.
Trusted Brands We Service in Edgewood
Most of the electric gates in Edgewood run on one of a handful of operator brands. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, and we’re experienced with Viking and Linear as well. That brand coverage means we can usually diagnose a motor, control board, or safety loop issue on the first visit rather than ordering parts blind. For Edgewood customers, we keep common replacement parts on hand for these brands, so a repair doesn’t always mean waiting for a distributor shipment. When we quote a repair on a LiftMaster operator or a FAAC swing arm, we’re quoting it with the right part number, not a guess.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Edgewood Homes
- Wind-loosened hardware on solid infill gates: Edgewood’s summer storms push hard against solid wood and metal driveway gates. Screws back out, hinges work loose, and latches stop lining up – we tighten, replace, and reinforce the hardware so the next storm doesn’t undo the repair.
- Pool gate safety code failures: Many Edgewood pool enclosures were built in the 1970s and 1980s, and their gates no longer self-close or self-latch. That’s a code violation and a drowning hazard. We retrofit self-closing hinges and adjustable tension latches onto existing gates without replacing the whole enclosure.
- Rotted hinge posts from saturated ground: After a heavy rainy season, we see posts that are solid above ground but soft at the base. The gate sags because the post is moving, not because the panel is warped. We replace the post and footing, then rehang the gate.
- Seized latches and hinges from humidity: Metal-on-metal hardware in Central Florida’s humidity corrodes fast. Gates that won’t latch or won’t swing freely are usually a hinge or latch replacement away from working again. We stock galvanized and stainless replacements for exactly this reason.
Pricing for Gate Repair in Edgewood, FL
Here are the ranges we quote most often around Edgewood. Hinge replacement and gate realignment runs $140 – $280. Weld repairs on metal gate frames run $120 – $260 per repair point. Replacing a rotted hinge post with a new footing and galvanized post runs $400 – $650. Electric gate operator diagnosis and repair runs $180 – $380 for common board, sensor, or limit switch failures. Full gate replacement, when repair isn’t worth it, starts around $1,200 for a basic manual driveway gate and goes up based on size, material, and operator. Every job is quoted and agreed before we start work, so there’s no surprise invoice. Call (866) 976-0095 and we’ll walk through your gate over the phone and give you an honest range.
We Also Serve Cities Near Edgewood
We work all through this part of Orange County, so if you’re in Belle Isle, Pine Castle, Sky Lake, or Holden Heights, the same Gate Repair in Edgewood team can reach you. Many of our Edgewood customers refer us to neighbors in those surrounding communities, and the failure patterns are similar – older homes, sandy soil, and summer storms. If you’re close to Edgewood, call and ask.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Edgewood
First, find the manual release on your gate operator – usually a keyed release or a pull handle on the motor housing – and pull it to disengage the motor so the gate can swing or slide by hand. If you can’t find the release or the gate won’t move once it’s disengaged, there may be a mechanical problem like a seized hinge or a wheel off its track. That’s when you call us at (866) 976-0095. We’ll talk you through it and get a technician out to Edgewood if it needs a hands-on repair.
Your pool gate must self-close and self-latch from any position, and the latch must be out of reach of small children. If you have to push the gate closed or wiggle the latch to get it to catch, it doesn’t meet current Florida pool safety code. Many Edgewood homes have original 1970s and 1980s enclosure gates that were never retrofitted. We install self-closing hinges and magnetic or spring latches to bring those gates up to code. Call for an assessment – it’s a quick fix in most cases.
The sandy soil under Edgewood soaks up water fast, but it also shifts and softens when saturated. The most common cause of a sagging gate is a hinge post that’s rotted at the base or lost its footing in the wet ground. The gate looks warped, but it’s actually the post that’s moved. We replaced a 1980s wood swing gate near Kaley Street recently where exactly this had happened – the post had rotted at ground level after heavy summer rains, so we set a new footing, installed a galvanized post, and fitted self-closing hinges to satisfy pool safety codes. The gate swings clean now.
Yes, and we do it regularly. We grind out the rusted areas, treat the surrounding metal, weld in new steel where needed, and reinforce weakened joints. For a gate that’s mostly surface rust with a few failed welds, repair makes sense. For a gate that’s structurally compromised throughout, we’ll tell you straight and quote a replacement instead. Either way, you get a clear recommendation, not a sales pitch.
We service LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. That covers nearly every residential and light commercial operator installed in Edgewood and the surrounding Orange County area. If you tell us the brand and what the gate is doing – or not doing – we can usually give you a solid idea of the problem before we even arrive. Call (866) 976-0095 for a free estimate.
Written by Noel Carver, Owner at Tampa Gate Company, serving Edgewood and Orange County with gate repair and installation.