Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Hudson
A gate that won’t close in Hudson isn’t a small annoyance. It’s a security gap on a canal-front driveway, a pool enclosure left open to kids and pets, a business entrance that won’t lock. We fix gates the same day in most Hudson cases, and we quote every job before we touch a tool. If your swing gate is sagging on rusted hinges or your slide gate jumped its track after the last storm, call (866) 976-0095 and you’ll talk to a gate specialist, not a dispatcher reading a script.
We know Hudson’s streets: Hudson Avenue, Denton Avenue, Sea Ranch Drive, the canal cuts west of US-19. We know what salt air does to a hinge pin in two seasons. That local knowledge means we diagnose faster and fix it right the first time.
Why Tampa Gate Company Is Hudson’s Preferred Gate Repair Company
Hudson homeowners and property managers call us because we only work on gates. Not HVAC, not plumbing, not garage doors. Every technician, every part, every tool in our trucks is focused on one trade. When we pull up to a canal-front property off Hudson Avenue, we already know what we’re likely to find: white corrosion on the hinge pins, a seized operator housing, a control board that took a lightning hit. That familiarity saves you time and money.
Our reputation in Hudson is built on showing up when we say we will and telling you honestly whether your gate needs a repair or a full replacement. We repair first. Replacement is the recommendation only when repair isn’t the right answer. That’s not a slogan. It’s how we quote every job across 34667, 34669, and 34674.
Noel Carver leads our crew, and he’s spent years building a team that can open a control board from LiftMaster, FAAC, or BFT and know what failed within minutes. Hudson gates are exposed to conditions that inland Pasco gates never face, and we spec repairs accordingly.
Styles & brands we work with
Iron Gate Repair in Hudson
Iron gate repair in Hudson usually comes down to corrosion at the hinge points and the post. On canal-front streets west of US-19, mild-steel hinge pins pit and bloom with white corrosion within roughly two seasons, a timeline that inland Pasco gate hardware never sees. That means the gate starts to drag, then binds, then freezes mid-arc. We see it on 1970s and 1980s ranch homes all through 34667.
Our Gate Repair team handles iron gates as a primary service. We cut out rusted hinge pins, replace them with stainless pin hardware, repair cracked welds, and reset post footings when the post has shifted in sandy soil. A basic hinge pin replacement on a single swing gate in Hudson typically runs $180 to $320. A full weld repair plus hinge replacement usually lands between $350 and $600. If the post itself is rotted at ground level, you’re looking at $400 to $800 for a cut-back and reset.
Weld and Rust Repair
Salt air eats welds first. On a Hudson iron gate, the bottom rail and the hinge-side stile are where rust gets a foothold. We grind back the scale, re-weld the joint, and coat it for coastal exposure. Leaving rust unchecked turns a $300 weld fix into a full gate replacement in three or four years.
Hinge and Post Repair
If your gate sags toward the latch side, the problem is usually the hinge post, not the panel. Sandy Hudson soil lets posts lean over time, especially after heavy storm rain. We reset the post in new concrete and shim the hinges so the gate closes flush.
Sliding Gate Repair in Hudson
Sliding gate repair in Hudson often starts with a gate that’s jumping the rack or grinding to a stop halfway. The culprit is usually the track: stamped slide gate tracks fill with salt-laden grit and corroded metal, so the operator strains and the gate derails after wind-blown storm debris. We work on sliding gates in Acreage neighborhoods east of US-19 and along the wider canal-front lots, where double gates and long spans are common.
A track roller replacement on a Hudson sliding gate typically runs $220 to $380. A full track cleanout and realignment runs $300 to $550. If the rack and pinion gears are worn, expect $400 to $700 to replace them and recalibrate the operator.
Track and Roller Replacement
Factory rollers on older Hudson installs are stamped units that seize quickly in salt air. We swap them for sealed rollers and clean the track with a corrosion inhibitor. That single change usually stops the jumping and the grinding for years.
Rack and Pinion Realignment
When storm debris gets caught in the rack, the gate gets knocked out of alignment and the operator starts fighting itself. We reset the gear mesh, check the torque settings on the motor, and verify the safety sensors are reading true. Most of the time that brings a slide gate back to smooth operation without replacing the operator.
Trusted Brands We Service in Hudson
We work on LiftMaster, FAAC, Mighty Mule, and BFT systems specifically. If your Hudson gate operator came out of a box store as a Mighty Mule kit or was installed as a LiftMaster commercial drive, we know the exact board, the sensor wiring, and the weak points. We carry parts for these brands on our trucks so we’re not making a second trip across the county just to finish a board swap. That matters when your gate is stuck open and you need it closed tonight.
Common Gate Repair Problems We See in Hudson Homes
- Salt corrosion on mild-steel hinges. Within two or three seasons, canal-front gate pins pit and seize. The gate won’t swing freely, and the operator starts laboring until it burns out.
- Control board failures from lightning season. Summer storms across 34667 and 34669 knock out pre-2000 operators routinely. We see fried boards and dead safety photocells every July and August.
- Slide gates jumping the track after storms. Wind-blown debris lands in the track, the rollers skip, and the gate derails. On canal-front properties the grit is mixed with salt, which accelerates rack wear.
- Sagging gates on 1970s and 1980s ranch homes. Original mild-steel posts rust below ground level in Hudson’s sandy soil, especially after heavy rain. The gate leans, the latch misses, and security effectively disappears.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Hudson, FL
Here’s what Hudson homeowners can expect to pay, based on the jobs we do most often.
- Hinge pin replacement (single swing gate): $180 – $320
- Weld repair plus hinge replacement: $350 – $600
- Post reset and re-footing: $400 – $800
- Track roller replacement (slide gate): $220 – $380
- Full track cleanout and realignment: $300 – $550
- Rack and pinion gear replacement: $400 – $700
- Control board replacement (brand-dependent): $350 – $900
Every price is quoted and agreed before any work starts. No surprises on the invoice. Estimates are free, and a service call to diagnose your Hudson gate costs a flat rate that we apply toward the repair if you approve it.
We Also Serve Cities Near Hudson
Tampa Gate Company covers Hudson and the surrounding communities, including Meadow Oaks, Bayonet Point, Jasmine Estates, and Heritage Pines. If you’re in a neighborhood just outside Hudson’s borders, call us and we’ll confirm coverage. Our Gate Repair in Hudson service area stretches across western Pasco, so if you’re nearby, chances are we can get to you this week.
Serving Hudson, FL — Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hudson
Salt air is the difference. Hudson’s canal-front properties sit close enough to the Gulf that airborne salt settles on exposed metal: hinge pins, track rollers, operator housings, control board terminals. Inland Pasco sees a fraction of that exposure. On Hudson’s west-of-US-19 streets, bare mild steel will show pitting and white corrosion within roughly two seasons. Call (866) 976-0095 and we’ll tell you exactly which parts on your gate need to be stainless or sealed to survive it.
In Hudson it’s usually the post. Sandy soil and heavy storm rain let hinge posts shift or rot below grade, especially on 1970s and 1980s installations. The panel itself is rarely bent unless a vehicle hit it. We check the post plumb, the footing integrity, and the hinge pins before recommending anything, and we’ll show you what we find.
Stainless steel hinge pins, sealed track rollers, galvanized or powder-coated frames, and control boards in properly gasketed housings. The original mild-steel hardware on a 1980s canal-front gate was never specced for coastal air, and that’s why it fails so fast. When we repair a gate in Hudson, we upgrade the failure points so you’re not calling us again in two years.
Yes. Florida requires automatic gates to have functioning entrapment protection: safety edges, photocells, or both, depending on the system. It’s a safety requirement that also protects you from liability. If your gate’s sensors are corroded or dead, we can replace and recalibrate them same day in most Hudson cases. Call (866) 976-0095 for a free estimate.
Storm debris and salt-laden grit collect in the track, the rollers bind, and the operator’s torque pushes the gate off its rail. The fix is a track cleanout, sealed roller replacement, and gear mesh realignment. It’s a common Hudson repair call after every named storm, and we’re set up to handle it quickly.
Contact Tampa Gate Company for Gate Repair in Hudson
If your gate is grinding, sagging, or stuck, call us at (866) 976-0095. You’ll get a real gate specialist on the phone who can talk through what you’re seeing and set up a free estimate. We repair before we recommend replacement, we quote before we work, and we know Hudson’s salt-air gate problems better than any general contractor ever will. One call to a specialist, not a generalist with a side interest in gates.
Written by Noel Carver, Owner at Tampa Gate Company, serving Hudson since day one.