Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gulfport, FL
Gate installation in Gulfport means something different than it does ten minutes inland. We’re working on a salt-air peninsula built up with 1920s – 1950s bungalows, where narrow lots, older posts, and coastal corrosion dictate materials and methods. Tampa Gate Company has served Gulfport since 2013, and we install gates that hold up to Boca Ciega Bay’s humidity without fighting the character of these older homes. Call (866) 976-0095 for a free estimate on any gate project in the 33711 zip code.
Why Gulfport Homes Are Different
Gulfport’s housing stock runs heavily to small bungalows, cottages, and modest block homes from the 1920s through the 1950s. That means we’re not bolting gates onto fresh vinyl fence posts like you’d find in newer subdivisions across St. Pete. We’re working with original wood posts, chain-link frames installed decades ago, and narrow side yards where a gate swing has to be planned carefully around rooflines and mature trees.
The bigger difference is the air. Gulfport sits on a small peninsula between Boca Ciega Bay and the Gulf, and the onshore breeze carries salt that chews through gate hardware fast. Hinges seize. Latch springs snap. Powder coating blisters and peels within a couple of seasons. On the waterfront blocks around Shore Boulevard and Gulfport Boulevard, we see gates that were installed six years ago looking like they’ve been there for thirty. Any gate we install in Gulfport gets corrosion-resistant hardware and weather-sealing as standard, not as an upsell.
The third factor is storms. After a tropical storm or flood event, we routinely rehang gates whose posts swelled, shifted, or rotted at the ground line. Homes that were elevated after flooding now have long runs of stairs that need gates at the top and bottom, and the old gate from the original foundation rarely fits the new layout. That’s a Gulfport-specific install pattern we’ve seen repeatedly since 2013.
Styles & brands we work with
Our Main Gulfport Services
Gulfport homeowners and property managers call us most often for two reasons: a gate that won’t close or latch properly, and an electric gate that’s stopped responding. Both get their own dedicated pages on this site, but here’s the quick picture.
Gate Repair in Gulfport
A sagging wood gate on a 1940s cottage, a chain-link gate that drags on the ground, a post that’s leaning after a storm, or hardware that’s rusted through from salt air are daily repair calls in Gulfport. We repair first. Replacement is only the recommendation when repair isn’t the right answer. On most Gulfport repairs we’re re-hanging, re-hinging, replacing rusted latches and hinges, and treating the metal or wood so the fix lasts longer than the original. Details on Gate Repair in Gulfport.
Electric Gate Repair in Gulfport
Electric gate acting up? We diagnose the motor, board, and safety loop, not just the obvious. Gulfport’s electric gate systems get hit hard by moisture and salt corrosion on control boards, safety sensors, and wiring connections. Many systems here are Mighty Mule or LiftMaster openers on older gates, and corrosion at the terminal strips is a regular culprit. We service the full electrical side before recommending any mechanical work. See Electric Gate Repair in Gulfport.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gulfport
Gate installation in Gulfport almost always involves matching what’s already there, whether that’s a restored wood picket garden gate on a cottage or a new automated driveway gate on one of the elevated post-storm homes. This isn’t a one-size-fits-all market. We’re installing gates that fit narrow lots, older homes, and salt-air conditions, and we spec hardware that won’t give up after two seasons of onshore breeze. As a gate-only company, Gate Installation is what we do every day, not a side line.
Automatic Gate Installation
Signs you need it
You want to open and close your gate without getting out of the car, or you need controlled access for a rental property or waterfront home.
What it costs in Gulfport
Automatic gate installation in Gulfport typically runs from $1,150 for basic single-swing systems to $7,600 for full automation packages, depending on the gate and operator.
How we do it
We assess the gate’s weight and swing arc, mount the operator on a reinforced post or pad, run power and low-voltage wiring, wire the safety loops and edges, and program remotes and keypads before testing the full open-close cycle.
Driveway Gate Installation
Signs you need it
Your driveway opens onto a busy Gulfport street and you want privacy, security, or control over who pulls into your property.
What it costs in Gulfport
Driveway gate installation in Gulfport typically starts around $1,150 and runs up to $7,600 for larger automated systems, with material choice and automation the biggest cost drivers.
How we do it
We set posts in concrete, hang the gate with corrosion-resistant hinges and hardware, set and level the gate for a clean swing, and if it’s automated, install the operator, safety loops, and access controls to match the driveway’s width and slope.
What Gate Installation Costs in Gulfport
| Item | Typical range in Gulfport |
|---|---|
| Basic manual gate installation | $450 – $950 |
| Automatic gate system (operator + gate + wiring) | $1,150 – $7,600 |
| Driveway gate installation (manual or automated) | $1,150 – $7,600 |
Do you handle the power run and the safety edges?
Yes. We run the power and low-voltage wiring, install safety loops at the driveway, and wire photo eyes and safety edges so the gate stops and reverses if anything is in its path. Call (866) 976-0095 for a site-specific quote.
How long does a Gulfport gate installation take?
Most residential gate installations in Gulfport are done in one to two days. Larger automated systems with concrete work, wiring runs, and access controls can take three to five days. We’ll give you a written timeline when we quote.
Brands We Service in Gulfport
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, and we carry common parts for these brands so Gulfport repairs don’t wait on shipping. If your opener or control board is acting up, we can usually identify the fault on the first visit. See our brands for the full list of systems we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gulfport, FL
| Service | Typical range in Gulfport |
|---|---|
| Gate repair | $150 – $850 |
| Electric gate repair | $175 – $1,600 |
| Automatic gate installation | $1,150 – $7,600 |
| Electric gate installation | $980 – $8,400 |
| Driveway gate installation | $1,150 – $7,600 |
| Sliding gate installation | $2,100 – $10,900 |
| Gate opener installation | $350 – $1,250 |
| Gate opener repair | $150 – $1,100 |
| Gate motor repair | $175 – $1,600 |
Prices in Gulfport run higher than inland areas when salt corrosion has damaged wiring, hinges, and posts, and when gates need custom sizing for narrow lots or older openings. The price you’re quoted is the price you pay, agreed before any work starts.
Neighborhoods We Serve in Gulfport
We work throughout the 33711 peninsula, from the waterfront blocks near Shore Boulevard to the cottages and bungalows around Gulfport Boulevard and the neighborhoods off 49th Street. Most of Gulfport is reachable within a short drive from our Tampa base.
- Waterfront District
- Gulfport Art District
- Pasadena Estates
- Boca Ciega Bay area
- 49th Street area
Service Area – Cities Near Gulfport
We also handle gate projects in the surrounding Pinellas County communities. That includes St. Petersburg, FL, South Pasadena, FL, Saint Pete Beach, FL, and Treasure Island, FL. If your property sits just outside the 33711 line, call (866) 976-0095 and we’ll tell you if we cover your street.
Serving Gulfport, FL — Our Local Coverage Area
We’re based in the Gulfport area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gulfport
We schedule Gulfport calls regularly through the week and can usually reach most of the 33711 peninsula quickly from our Tampa base. For a gate that’s stuck open or won’t close, call (866) 976-0095 and we’ll give you a realistic arrival window, not a vague promise.
Simple repairs and re-hangs on existing posts usually don’t need a permit. New gate installations with concrete footings, electrical runs, or posts set in the ground may require a city permit. We can tell you what applies to your project when we quote.
Yes. We regularly repair and re-hang original wood and chain-link gates on Gulfport’s older bungalows, including re-setting posts and sourcing hardware that matches the era. We’ll restore what’s salvageable and recommend replacement only when the material has failed beyond a safe repair.
If your gate is sagging, stuck, or stopped responding, call (866) 976-0095 for a free estimate. One call to a specialist, not a generalist with a side interest in gates.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gulfport Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer