Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in High Point, FL
Most gate work in High Point, FL isn’t a grand driveway entrance. It’s the pool-deck gate or lanai enclosure door that won’t latch, won’t close square, or won’t hold against wind anymore. Tampa Gate Company handles gate installation, repair, and electric gate work throughout High Point, where pool enclosures and screened lanais dominate nearly every residential lot. Call (866) 976-0095 when a gate stops doing its job.
Why High Point Homes Are Different
High Point sits inside the 34613 ZIP, a west-central Florida pocket where homes from the 1970s through the 2000s predominate. These are ranch and Mediterranean-style single-family houses, most with attached screened pool enclosures and lanais out back. That means the gate work here centers on pool barrier gates, enclosure doors, and light-duty aluminum driveway gates more than heavy commercial ironwork. The self-closing, self-latching hardware on a pool gate takes a beating from Florida’s pool safety barrier code requirements, and the subtropical Gulf Coast climate adds a second layer of stress. Hot, humid summers, heavy afternoon thunderstorms, and hurricane season accelerate corrosion on hinges and latches, warp wooden gate frames, and drive storm debris into tracks and rollers. High Point homeowners call us most during the summer rainy season, when a lanai gate that no longer latches fully shut becomes a code compliance problem as much as a repair job. Salt air and standing humidity work on aluminum frames and powder-coated hardware year round, which is why we see spring failures and hinge corrosion here that inland counties rarely experience.
Styles & brands we work with
Our Main High Point Services
High Point homeowners and property managers reach out for two gate problems more than anything else: a gate that won’t close or latch properly, and an electric gate that has stopped responding. Here’s what each involves in High Point specifically.
Gate Repair in High Point
Gate repair in High Point is driven by climate. Hinges corrode faster in the humid, salt-tinged air, self-closing springs lose tension, and storm-season wind knocks gates out of alignment so the latch no longer catches. We repair the full range: sagging gates, failing latches, broken hinges, warped frames, bent tracks, and damaged screen panels. Most High Point gate repairs are completed the same visit because we stock common hardware for aluminum and vinyl-framed pool gates. Full details are on our Gate Repair in High Point page.
Electric Gate Repair in High Point
Electric gate systems in High Point face the same environmental pressure plus the added complexity of motors, control boards, safety loops, and keypads. We work on LiftMaster, FAAC, BFT, Viking, Mighty Mule, and other systems found on local driveways. When a motor won’t respond, a keypad stops accepting codes, or the gate reverses unpredictably, we diagnose the full circuit first, not just the visible symptom. See our Electric Gate Repair in High Point page for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in High Point
New gate installation in High Point usually means one of two scenarios: the existing pool barrier gate has reached the end of its serviceable life, or a homeowner wants to add an automatic driveway gate to a property that never had one. The housing era matters here. Homes built in the 1970s through the 2000s often have original aluminum pool gates with hardware that’s now out of production, and a like-for-like replacement isn’t always the right call. We measure, specify, and install gates that fit High Point’s specific conditions, from aluminum pool and lanai gates to light-duty automatic driveway systems. Our full installation process is detailed on our Gate Installation page.
Automatic Gate Installation
Signs you need it
A driveway gate you’re tired of opening by hand, or an existing automatic gate that needs more repair than the system is worth.
What it costs in High Point
Automatic gate installation in High Point typically runs $1,200 – $3,600 for a complete single-swing system, depending on gate weight, motor type, and control features.
How we do it
We measure the gate and posts, confirm the swing path and clearances, quote a full installed price, then mount the operator, run power and control wiring, set the travel limits, and test the safety loops and obstruction sensors.
Driveway Gate Installation
Signs you need it
You want controlled driveway access and a new gate frame and operator installed together, not a repair to an aging setup.
What it costs in High Point
A new driveway gate in High Point, including the frame and a basic operator, typically falls between $1,200 and $3,600 installed.
How we do it
We build the gate to your driveway’s exact width and mounting conditions, set the posts, hang the gate, install and program the operator, and verify the safety loops and auto-close settings.
What Gate Installation Costs in High Point
| Item | Typical range in High Point |
|---|---|
| Automatic gate installation (single swing) | $1,200 – $3,600 |
| Driveway gate installation (frame + operator) | $1,200 – $3,600 |
| Pool barrier / lanai gate replacement | $300 – $1,500 |
Can you install a gate that meets Florida pool barrier code?
Yes. Self-closing, self-latching hardware is standard on every pool barrier gate we install in High Point, and we verify latch height, swing direction, and closure from full open before we call the job done. Bring us your HOA requirements and we’ll match them too.
How long does a gate installation take in High Point?
Most single driveway gate installations finish in four to eight hours once measurements and materials are confirmed. Pool gate replacements are usually done in under two hours. We quote a firm timeline at measurement so you know exactly what to expect.
Brands We Service in High Point
We service Mighty Mule, LiftMaster, FAAC, and BFT systems in High Point, among others. Common boards, remotes, sensors, and hinge hardware for these brands are stocked on our trucks, so most repairs don’t wait on a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in High Point, FL
| Service | Typical range in High Point |
|---|---|
| Automatic gate installation | $1,200 – $3,600 |
| Driveway gate installation | $1,200 – $3,600 |
| Pool barrier / lanai gate replacement | $300 – $1,500 |
| Electric gate repair | $150 – $600 |
| Control board replacement | $150 – $600 |
| Hinge replacement | $100 – $450 |
| Latch repair or replacement | $75 – $250 |
| Track and roller repair | $150 – $500 |
| Gate frame welding or straightening | $150 – $500 |
| Service call / diagnostic | $75 – $150 |
What pushes price up in High Point is usually corrosion-related: a hinge that’s seized and needs cutting out, a post that’s rotted at ground level, or a control board that’s been damaged by a power surge during a summer storm. Every quote is firm and agreed before we start any work, so the invoice matches the estimate.
Neighborhoods We Serve in High Point
We cover all of 34613 and the High Point communities that feed into it, including:
- High Point proper
- Seven Hills
- Glen Lakes
- Timber Pines
- Brooksville Ridge
For most High Point addresses, we’re on site within one to two business days of your call, and emergency repair calls get priority scheduling throughout the area.
Service Area – Cities Near High Point
Beyond High Point, Tampa Gate Company regularly serves Brookridge, FL, North Weeki Wachee, FL, Spring Hill, FL, and Brooksville, FL. If you’re nearby and need a gate specialist rather than a general handyman, we’ll be glad to help.
Serving High Point, FL — Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in High Point
Yes, Tampa Gate Company has served High Point since 2013 with a full service arc: repair first, replacement only when repair isn’t the right answer, and new installation when it is. That means one company can diagnose a failing gate and, if needed, spec the replacement start to finish.
Most gate repairs and like-for-like replacements don’t need a permit. New automatic driveway gates and some pool barrier work can trigger HOA review or a county permit depending on scope, but we’ll tell you exactly what applies to your job before any work begins.
We prioritize calls where a gate is stuck open, unlatched, or failing to close, especially pool barrier gates where safety is involved. Most High Point homeowners see us within one to two business days, and we’ll schedule emergency work around the rest of the route when it can’t wait.
If your gate won’t close, won’t latch, or won’t open at all, call Tampa Gate Company at (866) 976-0095. We’ll quote the repair or installation up front, in writing, before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What High Point Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett