Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Holiday, FL
Gate installation in Holiday, FL usually means working on an older single-story home built between the 1960s and 1980s, where the driveway gate has been fighting salt air and storm seasons for decades. We handle that reality every week. Tampa Gate Company installs, repairs, and services driveway gates, pool-enclosure gates, and entry gates across Holiday’s 34690, 34691, and 34692 ZIP codes. If your gate needs real attention from a team that only works on gates, call (866) 976-0095.
Why Holiday Homes Are Different
Holiday sits directly on the Pasco County Gulf coast, and that position shapes nearly every gate job here. The salt-laden air and constant humidity attack gate hardware faster than inland locations see. Steel gates rust at the hinges and latch points within a season or two. Aluminum fares better but its hardware corrodes just as fast. On the low-lying canal-front streets near the Gulf, storm surge and salt spray leave gate hardware pitted and seized, so local gate work is as much about freeing and replacing rusted latches, hinges, and operators as it is about the gate panels themselves.
Most of Holiday’s housing stock is modest block and stucco ranch homes from the 1960s through 1980s. These properties typically have chain-link or aluminum driveway gates, screened pool enclosures, and decorative entry gates at the end of short driveways. That means the gate work here is overwhelmingly residential and private property, not commercial or HOA-controlled. Older homes also mean older gate posts and footings, often poured shallow by today’s standards. A new gate install or a repair that requires post work has to account for what’s already in the ground. Seasonal storms bring wind and debris that distort gate frames and knock operators out of alignment, so we see a predictable cycle of storm-season damage each year.
Styles & brands we work with





Our Main Holiday Services
Holiday homeowners call us most often for two things: a gate that won’t open or close properly, and an electric operator that has stopped responding. Here’s what each involves in Holiday.
Gate Repair in Holiday
Most Holiday gate repairs come down to rusted hinges, sagging frames, or a latch that no longer catches. On older chain-link and aluminum driveway gates near the canals, the hardware fails before the panel does. We straighten distorted frames from storm debris, replace seized hinges and latches, and get the gate swinging true again. We repair first – replacement is only the recommendation when repair isn’t the right answer. For the full breakdown of what gate repair involves in Holiday, see our Gate Repair in Holiday page.

Electric Gate Repair in Holiday
Electric gates in Holiday face the same salt and humidity, but the failure points shift to the operator board, safety sensors, and wiring connections. Salt corrosion creeps into control boards and terminal blocks, and humidity shortens the life of exposed wiring. We diagnose the motor, board, and safety loop – not just the obvious. Brands like Mighty Mule and LiftMaster show up often on Holiday driveways, and we work on them specifically. For a full run-down of electric gate repair, see our Electric Gate Repair in Holiday page.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Holiday
New gate installation in Holiday is most often about replacing a gate that salt air and storm seasons have finally finished off. The older ranch homes here rarely had a quality gate installed to begin with, and decades of coastal exposure leave the posts, hinges, and panels beyond repair. We install new driveway gates, entry gates, and pool-enclosure gates built for the specific conditions on the Pasco coast. Our Gate Installation service covers everything from a simple manual gate to a full automatic system with a keypad and safety loops.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate every time, or a previous automatic system has corroded past repair on a canal-front property.
What it costs in Holiday
Automatic gate installation in Holiday typically runs $2,800 to $9,500 depending on the operator type, gate width, and power access.
How we do it
We set or reinforce the gate posts, hang the gate, mount the operator, run the power run, and install the safety edges and loops before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the hinges or the frame is too far out of square to hold a new operator.
What it costs in Holiday
Driveway gate installation in Holiday generally falls between $1,800 and $7,000, with automatic systems at the higher end of that range.
How we do it
We handle the full install: locate and set the posts, hang the gate, install the latch or lock, and if it’s an automatic system, complete the operator, keypad, and safety loop wiring.
Sliding Gate Installation
Signs you need it
Your driveway is too short or steep for a swinging gate, or the existing sliding gate track has been distorted by storm debris and salt corrosion.
What it costs in Holiday
Sliding gate installation in Holiday typically costs $3,000 to $12,000, with the final figure driven by gate length, operator type, and track work.
How we do it
We pour or set the track base, install the track and rollers, hang the gate, mount the operator, and set the limits and safety edges before cycling it several times.
What Gate Installation Costs in Holiday
| Item | Typical range in Holiday |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $4,500 |
| Automatic driveway gate (operator included) | $2,800 – $9,500 |
| Sliding gate with track and operator | $3,000 – $12,000 |
Do I need a permit for a new gate in Holiday?
In most Holiday residential cases, a simple gate replacement on existing posts does not require a permit, but new post footings or an electrical run for an automatic operator can. We check local Pasco County requirements as part of the quote and tell you before any work starts.
How long does a new gate installation take in Holiday?
Most standard Holiday driveway gate installations finish in one day. Automatic systems with a new power run, keypad, and safety loop usually take a full day to a day and a half depending on how much trenching the electrical work requires.
Brands We Service in Holiday
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, along with several others. Having deep brand familiarity across the operators common on Holiday driveways means faster diagnosis when a board fails or a loop stops detecting. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Holiday, FL
| Service | Typical range in Holiday |
|---|---|
| Gate repair (manual, hardware) | $125 – $525 |
| Electric gate repair (operator, board, sensor) | $195 – $725 |
| Automatic gate installation | $2,800 – $9,500 |
| Driveway gate installation | $1,800 – $7,000 |
| Sliding gate installation | $3,000 – $12,000 |
| Gate opener installation | $850 – $3,500 |
| Gate opener repair | $150 – $600 |
| Gate hinge, latch, or post repair | $125 – $525 |
In Holiday, salt corrosion and seized hardware push repair prices to the middle or higher end of those ranges, because a rusted hinge often needs cutting out rather than simple adjustment. Whatever the number, we quote the price before any work begins and you agree to it up front – no surprises on the invoice.
Neighborhoods We Serve in Holiday
We cover all of Holiday, including the canal-front streets near the Gulf where salt spray accelerates gate wear faster than anywhere else in Pasco County, and the inland ranch-home streets where older gates and operators are reaching the end of their service life after decades of coastal humidity.
- Canal-front streets near the Gulf
- Holiday Lake Estates
- Beacon Square
- Tahitian Gardens
- Colonial Hills
We’re typically able to reach most Holiday addresses the same day for repair calls, with installation visits scheduled at a time that works for you.
Service Area – Cities Near Holiday
Tampa Gate Company works throughout Holiday and the surrounding Pasco County communities. We regularly serve Beacon Square, FL just to the north, Key Vista, FL along the coast, Elfers, FL to the east, and Tarpon Springs, FL south across the county line. If you’re in one of those areas and need a gate specialist, the same team covers you.
Serving Holiday, FL — Our Local Coverage Area
We’re based in the Holiday area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Holiday
For repair calls, we’re usually able to reach Holiday addresses the same day or next morning. Installation work is scheduled, with a free on-site measure and written quote first. Call (866) 976-0095 and we’ll tell you straight what the timeline looks like.
Most of Holiday is single-family residential without an HOA, so gate decisions are generally yours to make. Where an HOA does exist, they may require a specific gate style or height. We’ve installed across enough Pasco communities to know what gets flagged and what doesn’t, and we’ll flag the concerns before you commit.
Yes. We serve 34690, 34691, and 34692, covering the canal-front Gulf streets, the interior ranch-home neighborhoods, and everything in between. If you’re anywhere in Holiday, you’re in our service area.
If your gate won’t latch, your operator won’t respond, or you’re ready to replace a gate the salt air has finished off, call Tampa Gate Company at (866) 976-0095. We’ll give you a free estimate, an honest assessment, and a gate that’s back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Holiday Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett