Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Longwood, FL
Gate installation in Longwood means something different depending on which side of town you call home. A 1970s ranch home in 32750 with a narrow side driveway needs a compact swing operator that won’t crowd the car. A Markham Woods estate in 32779 with a 20-foot ornamental driveway gate needs heavy-duty posts, reinforced hinges, and an operator that can push real weight through hurricane season. Tampa Gate Company has served Longwood since 2013, and we install both ends of that spectrum plus everything between. Call Gate Installation specialists at (866) 976-0095 for a free estimate on any gate project in Longwood.
Why Longwood Homes Are Different
Longwood’s housing stock splits into two distinct gate markets. In 32750, you’ll find mid-century ranch and patio homes built in the 1970s and 1980s, many with narrow driveways that angle off the street. Gates here tend to be compact single-swing or small sliding units, and the biggest install challenge is usually clearance, not weight. Out west in 32779 and east in 32791, the picture flips. Large-lot estate and equestrian properties dominate, with long custom driveway gates, perimeter fencing, and ranch-style hardware built to handle livestock and wide service vehicles. One crew has to be fluent in both. We are.
The soil under Longwood is another factor nobody thinks about until a gate post starts leaning. This part of Seminole County sits on the edge of the Wekiva Basin, where sandy and sandy-loam soils drain fast but shift after heavy rain. Gate posts on larger lots settle or heave unevenly, which means sag and post misalignment show up as often as operator failure. Central Florida’s humid subtropical climate adds its own layer: high UV beats on powder coating, summer thunderstorms spike control boards with lightning, and hurricane-season wind loads test every hinge and weld on a large ornamental gate. Any gate company working Longwood needs to install with all of that in mind from day one.
Styles & brands we work with
Our Main Longwood Services
Longwood homeowners and property managers call us most often for two things: getting a broken gate working again, and getting an electric system diagnosed when the motor or safety loop fails. Both are covered below, each with a dedicated Longwood page.
Gate Repair in Longwood
Most gate repair calls in Longwood start the same way: the gate won’t close, won’t open, or drags on the ground. On 32750 ranch homes, we usually find sagging hinges, a shifted post, or a latch that’s been hammered by years of humidity. Out in 32779 and 32791, the bigger gates add their own problems: bent hinge pins, cracked welds on ornamental steel, and rollers that have worn flat on sliding track. We repair first, and replacement is only the recommendation when repair isn’t the right answer. See the full breakdown at Gate Repair in Longwood.
Electric Gate Repair in Longwood
Electric gate acting up? We diagnose the motor, board, and safety loop, not just the obvious. Longwood’s frequent summer lightning makes control-board damage a common call, and the sandy soil here plays tricks on underground loop wiring after heavy rain. A gate that opens halfway and stops, or a keypad that won’t respond, usually points to something specific, and we find it fast. We work on LiftMaster, FAAC, BFT, Viking, and Mighty Mule systems specifically, and most parts can be sourced same day. Full detail on Electric Gate Repair in Longwood.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Longwood
Gate installation in Longwood has to account for the era of the home and the soil under the posts. A 1980s patio home in 32750 needs a different footing depth and operator choice than a Markham Woods estate gate in 32779, and we plan for both. Our Gate Installation service covers every step: measuring the opening, setting posts properly in sandy-loam soil, hanging the gate, mounting the operator, and testing safety features before we leave.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open the gate every time, or you’ve bought a property with a manual gate and want keypad or remote access.
What it costs in Longwood
Automatic gate installation in Longwood typically runs $3,500 to $9,000 depending on gate size, operator type, and whether we’re trenching for power and safety loops.
How we do it
We set the posts and hinge mounts first, hang and balance the gate leaf, then wire the operator, keypad, safety edges, and photo sensors, and run full open-close cycle testing.
Driveway Gate Installation
Signs you need it
You want real perimeter security at the driveway line, not just a gate across a fence opening.
What it costs in Longwood
Driveway gate installation in Longwood runs $2,500 to $12,000 depending on width, material, automation, and whether it’s a swing or slide design.
How we do it
We measure the driveway width and grade, recommend swing or slide based on slope and setback, pour or set posts below the soil-shift zone, and install gate, operator, and access controls as one system.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the road or you don’t have room for a swing gate to arc inward, which is common on several Longwood estate lots.
What it costs in Longwood
Sliding gate installation in Longwood starts around $3,000 for basic manual track models and runs $5,000 to $12,000 for automated cantilever or track systems.
How we do it
We pour a level concrete track pad or set cantilever posts, mount the gate and rollers, install the operator and safety loops, and test travel limits so the gate stops exactly where it should.
What Gate Installation Costs in Longwood
| Item | Typical range in Longwood |
|---|---|
| Single swing gate, manual | $1,500 – $4,000 |
| Double swing gate, automated | $5,000 – $10,000 |
| Sliding gate, automated | $5,000 – $12,000 |
How long does gate installation take in Longwood?
A standard single swing gate install in Longwood is usually done in one day. Larger estate gates with automation and safety loops take two to three days including concrete cure time for post footings.
Do you handle permits and HOA approvals in Longwood?
Yes. We work with Seminole County permit requirements and Longwood HOA specs on setbacks and gate height. Most residential gate replacements don’t need a permit, but new driveway installations often do, and we flag that before work starts.
Brands We Service in Longwood
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, along with five other major gate brands. That covers the majority of residential and commercial operators installed across Longwood. For the full list and our parts-stocking approach, see our brands. Most replacement boards and arms for these brands are sourced same day in Central Florida, which keeps repair turnaround short.
Pricing for Gate Company in Longwood, FL
| Service | Typical range in Longwood |
|---|---|
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,500 – $12,000 |
| Sliding gate installation | $3,000 – $12,000 |
| Electric gate installation | $3,200 – $8,500 |
| Single swing gate, manual | $1,500 – $4,000 |
| Double swing gate, automated | $5,000 – $10,000 |
| Gate opener motor replacement | $450 – $1,200 |
| Control board replacement | $350 – $900 |
| Safety sensor or loop repair | $250 – $700 |
| Hinge and weld repair | $200 – $600 |
What pushes cost up in Longwood is usually gate width and weight on estate lots, soil conditions that require deeper post footings, and the distance from the gate to the nearest power source. Every installation price is quoted and agreed in writing before any work starts.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Longwood
We cover all four Longwood ZIP codes: 32750, 32752, 32779, and 32791. Typical response for most repair calls in Longwood is same-day or next-day, depending on part availability and current routing.
- Markham Woods
- Springs Landing
- Sabal Point
- Alaqua
- Wekiva Hills
Service Area – Cities Near Longwood
Our Longwood crews also cover the surrounding Seminole County communities. If you’re just over the line in Lake Mary, FL or Casselberry, FL, the same gate specialists handle your call. We regularly work in Winter Springs, FL and Altamonte Springs, FL as well, bringing the same gate-only focus and brand coverage to every job.
Serving Longwood, FL — Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Longwood
Most Longwood repair calls are scheduled same-day or next-day. We route technicians from the surrounding Seminole County area, and most common failures on Viking, Ghost Controls, DoorKing, and Elite systems can be diagnosed on the first visit with parts sourced same day. Call (866) 976-0095 for a free estimate.
Some do. New driveway gate installations in Longwood often require Seminole County permitting, and several HOAs in Markham Woods and Alaqua have their own setback and height rules. We check both before quoting so you’re not caught mid-project. The price is always agreed before work starts.
Yes. Tampa Gate Company has served Longwood since 2013, covering all four ZIP codes: 32750, 32752, 32779, and 32791. That includes the large-lot estate and equestrian properties on the west side where custom driveway gates and perimeter fencing are the norm, not the exception.
Contact Tampa Gate Company in Longwood
If your gate is sagging, stuck, or dead at the keypad, call (866) 976-0095. We’re a gate-only specialist covering Longwood, FL with repair and installation on nine major brands. Free estimates, upfront pricing, and a technician who knows your system on sight.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Longwood Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris