Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lutz, FL
Gate installation in Lutz means building for big lots, long driveways, and weather that punishes cheap hardware. Most of the gates we install here are aluminum double-swing and sliding estate gates set well back from the road, behind ranch fencing or on new gated-subdivision entries. The soil drains slowly, lightning is a real threat, and the gate has to survive hurricane-season wind and rain without failing. Tampa Gate Company has served Lutz since 2013, and we build every install around those local conditions rather than treating a Lutz gate like a Tampa sidewalk job. Call (866) 976-0095 for a free on-site measure and written price.
Why Lutz Homes Are Different
Lutz is a semi-rural, large-lot community, and that shapes nearly every gate we touch. Most homes sit on one to five acres of flat, sandy soil that holds water after a storm. Driveway gates here are typically set 100 to 400 feet back from the road, which means long underground runs of low-voltage wire connecting the operator to the house, keypad, and safety loops. When the ground gets saturated, splices wick moisture and the system goes dead even though the operator arm looks fine. Homeowners in ZIP codes 33548, 33549, 33558, and 33559 call us with the same story: clicker works, gate doesn’t move.
Housing stock runs heavily to 1980s through early-2000s custom and semi-custom ranch and two-story homes, plus a growing number of newer gated subdivisions with builder-installed operators. That mix means we see older chain-link and vinyl ranch fencing with retrofitted slide operators, alongside newer aluminum estate gates and factory swing systems. The older jobs usually need more than a part swap. We’re often replacing corroded hinge posts, re-pulling wire across a culvert, or rebuilding a control box that’s been hit by one too many summer lightning strikes before we even get to the gate itself. Lutz homeowners don’t want cosmetic work when the gate is dead and the property is open to the road.
Styles & brands we work with
Our Main Lutz Services
Lutz homeowners call on two things more than anything else: a gate that’s stopped moving, and an electric system that works sometimes but not when it matters. Both get their own full pages, and both start with a specialist diagnosis rather than a guess.
Gate Repair in Lutz
A Lutz gate repair often starts at the driveway culvert, not at the gate. Rainy-season water wicks into buried splices, the clicker goes dead, and the operator looks fine while nothing moves. We open the splice boxes, check continuity through the loop, and repair or re-pull the run so the gate actually works again. Long driveways also mean hinge and post fatigue on older aluminum and wrought-iron frames, especially after hurricane-season wind. Read the full breakdown at Gate Repair in Lutz.
Electric Gate Repair in Lutz
Electric gates in Lutz take a beating from humidity, lightning, and heavy daily cycling. When a LiftMaster or BFT operator behaves erratically, the cause is usually a corroded control board, a failed safety loop, or a surge-damaged transformer, not the arm itself. We diagnose the full circuit: motor, board, loop detector, keypad, and power supply. If the gate opens but won’t close, or closes but won’t lock out the loop, the problem is almost always in the logic or the sensors. Full detail at Electric Gate Repair in Lutz.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lutz
Gate installation in Lutz means building a system that survives saturated sandy soil, Florida UV, and hurricane-season wind without dying a year in. We install automatic, electric, sliding, and driveway gates sized for long setbacks and big openings, and we handle the full run from the house to the gate including underground power, loops, keypads, and intercom wiring. Because we repair the same systems every week, we know what fails in Lutz and we build against it from day one. Get the full picture on our Gate Installation service page, or read the details below.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open and close a gate on a one-to-five-acre lot every day, or the property needs a controlled entry point that doesn’t rely on human memory.
What it costs in Lutz
Automatic gate installation in Lutz typically runs $2,500 to $7,500, with higher-end swing systems and long wire runs pushing toward the top of that range.
How we do it
We set the posts in concrete, mount the operator and control box, pull the low-voltage and power runs from the house, set the safety loops in the driveway, and program remotes and keypads before testing the full cycle in both directions.
Electric Gate Installation
Signs you need it
You want keypad or remote access from the road, an intercom for visitors, or an existing gate that’s ready for automation but isn’t wired for it.
What it costs in Lutz
Electric gate installation in Lutz typically runs $2,800 to $7,500, depending on the operator, access-control components, and the length of the underground run.
How we do it
We install the operator and any needed control board, pull the power and low-voltage wiring through conduit, mount and program the keypad and intercom, and set safety edges and loops so the gate never closes on a vehicle or person.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the gate opening, the gate has to sit inside a tight fence line, or a swing gate would block the driveway when open.
What it costs in Lutz
Sliding gate installation in Lutz typically runs $2,500 to $7,500, with the final price driven by gate length, track or cantilever style, and the wire run to the operator.
How we do it
We set the track or cantilever posts, mount the gate and operator, run the power and safety loop wire, and program the open and close limits so the gate travels fully without binding.
Driveway Gate Installation
Signs you need it
The property needs a controlled entry at the road, the current gate is rusted or sagging beyond reasonable repair, or a new gated-subdivision build requires a compliant driveway gate from day one.
What it costs in Lutz
Driveway gate installation in Lutz typically runs $2,500 to $7,500, with custom aluminum or wrought-iron frames and long wire runs adding the most cost.
How we do it
We measure the opening and setback, build or order the gate to spec, set posts and hinges, mount the operator, pull the wire, and leave the system programmed, tested, and closing on its safety loops.
What Gate Installation Costs in Lutz
These are the figures we quote from. Every job gets a written price after a free on-site measure, before any work starts.
| Item | Typical range in Lutz |
|---|---|
| Gate installation (full system) | $2,500 – $7,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Electric gate installation | $2,800 – $7,500 |
Do you handle the power run and the safety loops?
Yes. We pull the underground power and low-voltage wiring from the house to the gate, set the safety loops, and wire the keypad and intercom. The whole system is tested before we leave, not just the gate movement.
Can you install a gate before storm season in Lutz?
We do full measure-and-quote calls on a scheduled basis, and we build install timing around the wet season so posts and concrete can set properly. Call (866) 976-0095 to book a free on-site measure and get on the schedule.
Brands We Service in Lutz
We work on Mighty Mule, LiftMaster, and FAAC systems regularly across Lutz, and we keep common boards, loop detectors, and remote kits locally available for faster turnaround. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lutz, FL
These are the ranges we quote in Lutz. Every price is written and agreed before any work starts, so there’s no surprise invoice at the end.
| Service | Typical range in Lutz |
|---|---|
| Gate installation (full system) | $2,500 – $7,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Electric gate installation | $2,800 – $7,500 |
| Gate repair | $180 – $340 |
| Electric gate repair | $200 – $475 |
| Gate operator repair | $185 – $350 |
| Hinge and post repair | $150 – $300 |
| Gate wheel and track repair | $175 – $325 |
| Fence and gate combo repair | $300 – $675 |
| Emergency gate repair | $225 – $500 |
In Lutz, the biggest price drivers are long underground wire runs across big lots, saturated-soil excavation, and lightning-surge board replacement. We quote the full number up front, in writing, before any work begins.
Neighborhoods We Serve in Lutz
We work across the whole Lutz area, from older acreage ranches to the newer gated subdivisions off the main corridors. Response is typically fastest for homes near the Lutz core, with a slightly longer drive to the edges of 33548 and 33559.
- Van Dyke Farms
- Crenshaw Lake area
- Lake Fern / north Lutz
- Central Lutz / Lutz-Lake Fern Road corridor
- New gated subdivisions along SR 54
Service Area – Cities Near Lutz
In addition to Lutz, our gate repair and installation work regularly takes us into Cheval, FL, Carrollwood, FL, Lake Magdalene, FL, and north into Land O’ Lakes, FL. If your gate sits on the edge of Lutz or in one of these nearby communities, call and we’ll confirm coverage before sending a truck.
Serving Lutz, FL — Our Local Coverage Area
We’re based in the Lutz area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lutz
We schedule repairs and service calls across Lutz on a same-week basis in most cases, with emergency calls handled as capacity allows. Call (866) 976-0095 and we’ll give you a straight answer on timing for your part of Lutz.
Some Lutz HOAs and gated communities require an architectural review or a permit for a new driveway gate, especially in front-yard setbacks. We work with the owner to confirm what’s needed before install day, and we build to the approved spec rather than asking for forgiveness later.
We cover the full Lutz area including 33548, 33549, 33558, and 33559, from the older ranch lots to the new gated subdivisions. If you’re on the Lutz edge, call (866) 976-0095 and we’ll confirm coverage before scheduling.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lutz Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett