Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Maitland, FL
Gate installation in Maitland means working with mid-century ranch homes, 1970s and 80s subdivisions, and lakefront estates where the air itself shortens hardware life. Most driveways here hold older single-swing or sliding steel gates, often with DIY-installed operators that were never quite right. The lake chain that runs through Maitland changes what we recommend and how we build. If your gate is failing, sagging, or just not opening when you expect it to, call Tampa Gate Company at (866) 976-0095 for a free estimate from a gate specialist who knows Maitland.
Why Maitland Homes Are Different
Maitland sits between Lake Maitland, Lake Sybelia, and the Winter Park chain of lakes, and that geography dictates how gates age. Homes within a few blocks of any shoreline get salt-laden lake air that corrodes steel hinges, weld seams, and operator internals noticeably faster than the same hardware a mile inland. We regularly see lakefront gates in Maitland with rust at the hinge seam within two or three seasons, while identical gates on inland streets last years. For lakefront and canal-side properties, that means stainless or galvanized hardware from day one.
The housing stock matters too. Maitland’s 32751 core is dominated by ranch homes built between the 1950s and 1980s, and many of those driveways still have the original gate post or gate frame the house came with. A lot of those older posts were set shallow, and decades of Florida rain and humidity have loosened them. Add hurricane-season wind and the limbs that come down in summer storms, and you get bent gate arms, knocked-out rollers, and operators that burned out trying to move a gate that was already binding. A technician who only knows new construction misses most of that.
Styles & brands we work with
Our Main Maitland Services
Most Maitland homeowners call us for two reasons: a gate that won’t move, and a gate that moves when it shouldn’t. Here are the two services we handle most in Maitland.
Gate Repair in Maitland
When a gate sags, drags, or won’t latch, the cause in Maitland is usually corrosion or a failing hinge rather than the gate itself wearing out. We repair the hardware that fails in this climate: rusted hinges, seized rollers, bent tracks, loose posts, and gates that have shifted out of square. Older steel gates near the lakes often need hinge and weld repair before anything else makes sense. A gate that won’t close is a security problem, not a cosmetic one, and repair is usually faster and cheaper than replacement. For a full breakdown of what we fix and what it costs, see our Gate Repair in Maitland page.
Electric Gate Repair in Maitland
Electric gates in Maitland fail most often because the operator, control board, or safety loop has been fighting humidity for years. We diagnose the whole system, not just the obvious part: motor, board, safety sensors, keypad, intercom, and the wiring between them. Summer lightning and storm power surges take out control boards regularly here, and a board failure often looks like a motor failure to someone who doesn’t work on gates every day. Our Electric Gate Repair in Maitland page covers the full diagnostic process and typical costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Maitland
Gate installation in Maitland is a different job than it is in a brand-new subdivision. Most of the homes in the 32751 ZIP code were built before automated gates were common, so the driveway, post spacing, and electrical setup were never designed for a motorized system. We plan every installation around the actual site: the soil and post depth, the distance to a power source, how the gate will swing or slide, and whether the hardware needs to be stainless or galvanized to survive lake air. For a full look at how we build, see our Gate Installation service page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open the gate manually, or you want controlled access to your driveway without a full-time guard.
What it costs in Maitland
Most automatic gate installations in Maitland run between $4,500 and $9,500 installed, with higher-end estate systems nearing $13,500.
How we do it
We measure the driveway, confirm the right operator for the gate’s weight and cycle count, set posts to depth, run the power and low-voltage lines, mount the operator and safety devices, and program and test the full cycle.
Driveway Gate Installation
Signs you need it
Your current gate sags, binds, or scrapes the driveway, or you’re ready to add a gate to a driveway that’s never had one.
What it costs in Maitland
Expect $2,500 to $7,000 for a driveway gate in Maitland depending on width, material, and automation, with high-end automated systems reaching $13,500.
How we do it
We survey the driveway entry, dig and set posts for the soil conditions, hang or weld the gate square, install hardware matched to the climate, and leave the gate swinging or sliding cleanly with no drag.
Sliding Gate Installation
Signs you need it
Your driveway has a slope or limited swing clearance, or you need a heavier gate that a swing hinge can’t support over time.
What it costs in Maitland
Sliding gate installation in Maitland typically runs $3,500 to $10,500, with long automated runs up to $13,500.
How we do it
We check the ground track or cantilever path, pour or set the base, lay the track and stops, build and hang the gate, and install the motor, guides, and safety sensors before testing the full travel repeatedly.
What Gate Installation Costs in Maitland
| Item | Typical range in Maitland |
|---|---|
| Gate and post installation | $2,500 – $7,000 |
| Automatic gate system with operator | $4,500 – $9,500 |
| Sliding gate, automated | $3,500 – $10,500 |
Prices in Maitland shift with a few local factors: proximity to the lakes (which pushes hardware toward stainless or galvanized), post depth and concrete work in sandy or wet soil, and the length of any power run from the house to the gate. We quote every job before work starts, and the price you approve is the price you pay.
How long does gate installation take in Maitland?
Most Maitland installations take two to three days from post setting to programming, depending on concrete cure time and electrical work. We schedule around weather and order parts first so the site isn’t left open.
Do I need HOA approval for a gate in Maitland?
Many Maitland HOA communities and lakefront associations require architectural review before a gate changes appearance or footprint. We don’t file for you, but we can provide drawings and specs to make the approval faster.
Brands We Service in Maitland
We work on the systems Maitland homeowners and property managers actually have installed, and we stock common service parts for our brands locally so repair doesn’t stall waiting on a shipment. That includes LiftMaster, Mighty Mule, FAAC, and BFT, among others. If we know the brand, we usually know the failure pattern before we arrive.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Maitland, FL
| Service | Typical range in Maitland |
|---|---|
| Gate and post installation | $2,500 – $7,000 |
| Automatic gate system with operator | $4,500 – $9,500 |
| Sliding gate installation, automated | $3,500 – $10,500 |
Lakefront and canal-side properties in Maitland generally run toward the upper end of these ranges because the hardware should be stainless or galvanized rather than standard steel. The price we quote is the price you approve before work begins, and estimates are free.
Neighborhoods We Serve in Maitland
We work throughout Maitland’s 32751 and 32794 ZIP codes, from the mid-century streets off Horatio Avenue and Thistle Lane to the lakefront communities around Lake Maitland and Lake Sybelia, and the HOA subdivisions toward the Winter Park chain.
- Dommerich Hills
- English Estates
- Lake Sybelia area
- Druid Hills
- Maitland Shores
We’re typically scheduling Maitland visits within a few business days, and emergency repair calls get priority where the gate is down and the property is unsecured.
Service Area – Cities Near Maitland
Our Maitland crews also cover the surrounding cities where the same lake-air corrosion and mid-century housing patterns show up. We serve Eatonville, FL, Fern Park, FL, Forest City, FL, and Lockhart, FL with the same gate-only focus and local parts knowledge.
Serving Maitland, FL — Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maitland
When a gate is stuck open or won’t close, the property is unsecured, so we treat those as priority calls. We schedule emergency repair in Maitland as fast as the schedule allows, usually within a day or two, and we’ll tell you honestly what’s possible when you call.
Gate replacement on the same posts usually doesn’t require a city permit, but new posts, widening a driveway opening, or adding electrical runs can trigger review. HOAs around the lakes are often stricter than the city. Call us and we’ll walk through what applies to your specific street.
We cover all of Maitland’s 32751 and 32794 ZIP codes, including lakefront streets and inland subdivisions. Our technicians carry parts for the gate brands common across the area so most repairs don’t wait on an order.
If your gate in Maitland is sagging, seized, or sitting dead after a storm, call Tampa Gate Company at (866) 976-0095. We’ll quote the work before anything starts, and we’ll tell you honestly whether repair or replacement is the right call.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maitland Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman