Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mount Plymouth, FL
Gate installation in Mount Plymouth, FL typically runs $1,800 to $14,000 depending on whether you’re replacing a farm gate on a post or automating a heavy slide gate on a sugar-sand driveway. Tampa Gate Company has served Mount Plymouth since 2013, and the jobs here look different from what you’d see in a paved subdivision closer to Orlando. We’re talking long gravel drives off CR 437 and SR 46, wide horse-trailer openings, and openers that have to survive lightning season and sandy soil that shifts under footings. Call (866) 976-0095 for a free estimate on gate installation, repair, or automation work in Mount Plymouth.
Why Mount Plymouth Homes Are Different
Mount Plymouth is a rural, equestrian-oriented enclave in Lake County where most driveways are long and unpaved or gravel. That changes the gate work we do. Instead of decorative aluminum courtyard gates, we’re installing and repairing heavy-duty swing and slide openers that have to hold up to sugar-sand footing, horse-trailer traffic, and power outages from afternoon storms. The housing stock here is large-lot single-family homes and small horse farms on acreage, many with custom or older site-built homes, barns, and outbuildings. Gates are wide, heavy farm and security gates on long rural driveways, not urban pedestrian gates.
Central Florida’s subtropical climate is hard on gate hardware. Intense summer thunderstorms, frequent lightning, and high humidity put real stress on control boards, photo-eyes, and opener motors. Sandy soil shifts after heavy rain, and that throws swing gates out of alignment faster than most homeowners expect. On the sand roads off CR 437 and SR 46, we routinely see gate posts set in sugar sand heave and lean after the wet season. Repairing a gate there often means re-setting posts and re-plumbing the track before the opener can be trusted again, which is a job you rarely see on paved subdivision drives.
Styles & brands we work with
Our Main Mount Plymouth Services
Most Mount Plymouth homeowners call us about two things: a gate that won’t open, and an electric opener that’s acting up. Here’s what each one involves locally.
Gate Repair in Mount Plymouth
Gate repair in Mount Plymouth often starts with a wide farm gate that’s sagging, dragging in the sand, or pulled its post out of square. We work on both manual and electric systems, and the repair-first approach means we fix what’s broken rather than pushing a replacement you don’t need. The sandy soil and long unpaved drives here mean hinge wear and post heave are more common than in paved neighborhoods. See Gate Repair in Mount Plymouth for what a typical repair involves and what it costs.
Electric Gate Repair in Mount Plymouth
Electric gate repair in Mount Plymouth means diagnosing the motor, control board, and safety loop, not just the obvious symptom. Lightning strikes and the high humidity of Lake County summers kill control boards and corrode connections faster than anything else we see. A gate that opens on its own, stops mid-cycle, or won’t respond to the keypad usually has a specific electrical fault. We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically. See Electric Gate Repair in Mount Plymouth for a full breakdown of electrical diagnostics and local pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mount Plymouth
Gate installation in Mount Plymouth means sizing an opening wide enough for a horse trailer, setting posts deep enough to survive sugar-sand soil, and choosing an opener rated for a gate that weighs hundreds of pounds, not a decorative aluminum panel. Most of the driveways we work on off CR 437 and SR 46 are unpaved, which means the track or post foundation matters as much as the gate itself. Tampa Gate Company handles both the gate and the automation, so you’re not coordinating a fence company, an electrician, and a gate tech separately. For a full look at what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening a heavy gate by hand every time you leave, or you have a manual gate that needs to become a security barrier for the property.
What it costs in Mount Plymouth
Automatic gate installation in Mount Plymouth typically ranges from $2,800 to $12,000 depending on gate width, weight, and whether you need a new opener or a complete gate and operator package.
How we do it
We measure the opening and the gate weight, set posts to a depth that handles Mount Plymouth’s sandy soil, install the operator, run the power and safety loops, and program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
You have a long driveway off a rural road and want a physical barrier that keeps vehicles and uninvited traffic from pulling up to the house or barn.
What it costs in Mount Plymouth
Driveway gate installation in Mount Plymouth typically ranges from $1,800 to $9,000, with wide farm gates and site work on the high end.
How we do it
We survey the driveway width and turn radius, set posts or columns, hang the gate, and if it’s automated, install the operator, safety edges, and photo-eyes so the gate stops and reverses properly.
Sliding Gate Installation
Signs you need it
Your driveway is wide enough that a swing gate would need too much clearance, or the drive slopes and a swing gate would drag on the high side.
What it costs in Mount Plymouth
Sliding gate installation in Mount Plymouth typically ranges from $2,500 to $14,000, with heavier cantilever or track slides on the upper end.
How we do it
We set the track or cantilever posts level, hang the gate, install the opener and safety sensors, and make sure the gate runs true over sand that shifts seasonally.
What Gate Installation Costs in Mount Plymouth
| Item | Typical range in Mount Plymouth |
| Driveway gate installation | $1,800 – $9,000 |
| Automatic gate installation | $2,800 – $12,000 |
| Sliding gate installation | $2,500 – $14,000 |
Do I need a permit for a gate in Mount Plymouth?
Lake County generally treats farm and driveway gates as accessory structures, and most Mount Plymouth properties on acreage don’t need a permit for a gate itself. If the gate is automated and tied to a driveway apron that connects to a county road, an easement or setback check can apply. We’ll walk you through what’s needed for your specific property.
Can you install a gate on a sand road driveway?
Yes, and this is most of what we do in Mount Plymouth. The key is post depth and footing design that resist heave when the sugar sand saturates and shifts after heavy rain. We set posts deeper than standard and re-check alignment after the first wet season. Call (866) 976-0095 for a free site evaluation.
Brands We Service in Mount Plymouth
We work on Viking, Ghost Controls, and DoorKing systems specifically, along with the other major brands, and keep common boards, remotes, and safety parts in stock for the openers Mount Plymouth homeowners actually have. That means most repairs don’t wait on a shipped part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mount Plymouth, FL
| Service | Typical range in Mount Plymouth |
| Gate installation (driveway) | $1,800 – $9,000 |
| Automatic gate installation | $2,800 – $12,000 |
| Electric gate installation | $3,000 – $14,000 |
| Sliding gate installation | $2,500 – $14,000 |
| Gate repair | $190 – $600 |
| Electric gate repair | $220 – $750 |
| Control board replacement | $400 – $1,200 |
| Gate opener failure | $250 – $700 |
| Solar gate system repair | $250 – $900 |
In Mount Plymouth, the two things that push price up are gate width and soil. A 14-foot horse-trailer gate in sugar sand needs deeper posts and a heavier opener than a standard 10-foot gate on solid ground, and if the wet season has heaved the track, you’re paying for regrading before the gate work starts. Every job is quoted in writing before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Mount Plymouth
We work throughout the 32776 ZIP code, from the acreage off CR 437 to the properties along SR 46 and the sand roads branching off both. Most of our Mount Plymouth calls come from the long-driveway homes and horse farms that make up this part of eastern Lake County.
- CR 437 corridor and side sand roads
- SR 46 west of Sorrento
- Horse farms off Lake County back roads
- Large-lot acreage around Lake Nellie
- Properties near the St. Johns River conservation land
We schedule Mount Plymouth work in half-day windows, and our techs know the roads well enough that we don’t need to call for turn-by-turn directions once we’re off the paved main roads.
Service Area – Cities Near Mount Plymouth
Beyond Mount Plymouth, Tampa Gate Company covers the surrounding Lake and Orange County communities. If you’re in Zellwood, FL, Tangerine, FL, Mount Dora, FL, or Eustis, FL, we offer the same gate repair and installation services throughout the area.
Serving Mount Plymouth, FL — Our Local Coverage Area
We’re based in the Mount Plymouth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mount Plymouth
We schedule Mount Plymouth calls during the week and can usually work in a next-day or same-week visit depending on the season. Emergency gate failures, like a gate stuck open or an opener that won’t respond, get priority. Call (866) 976-0095 and we’ll give you a straight answer on timing.
Most Mount Plymouth properties aren’t in HOAs at all, since the area is rural acreage rather than platted subdivisions. A handful of newer tracts off SR 46 have covenants that govern gate height, color, and whether the gate can be automated. We’ll match your install to whatever your deed restrictions or county rules require.
That depends on the opener and how the surge protection is set up. Lightning hits control boards through the power run and the keypad wiring, so we install surge protection on both sides of the circuit as standard practice. If your gate has been through two or three lightning seasons without a board failure, your protection is doing its job. If not, call (866) 976-0095 and we’ll check the whole electrical path.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mount Plymouth Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett