Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Taft, FL
Gate installation in Taft means planning for sandy soil that shifts, humidity that corrodes, and a housing stock that runs from 1970s ranch homes on half-acre lots to brand-new airport-adjacent HOA communities. Tampa Gate Company has served Taft since 2013, so our crews know exactly what a new gate needs here: deeper posts, galvanized hardware, and operators rated for daily thunderstorm exposure. We handle the full installation as well as ongoing repair, because a gate in Taft is rarely a set-it-and-forget-it purchase. Call (866) 976-0095 for a free estimate on your Taft property.
Why Taft Homes Are Different
Taft sits in ZIP 32827, a small historically rural pocket just south of Orlando International Airport that has transformed into a corridor of older single-family homes pushed up against new master-planned streets and commercial warehouse rows. That split changes gate work here. The older homes we visit near the east side of Taft often have driveway gates welded from steel tube stock back when the area was still orange groves, mounted on posts set in sandy fill that has since settled unevenly. The newer HOA communities rising along the airport corridor have perimeter gates and estate driveway gates built to current wind-load standards, but they rely on automated operators and access systems that fail in very different ways.
Central Florida’s humid subtropical weather works against every gate in Taft, regardless of age. Heavy summer storms push water into hinge cups and operator housings. High UV breaks down powder coat finishes within a few seasons. And the low-lying, sandy soil means even a well-built gate post can drift a few degrees out of plumb in five years, which throws the latch alignment off and burns out automatic opener gears. We also see salt-air influence from coastal weather patterns mixing with airport runoff, accelerating rust on exposed welds and chain-drive components. A Taft gate simply requires more aggressive sealing, more frequent hinge lubrication, and posts set deeper than what typical installation charts call for.
Styles & brands we work with
Our Main Taft Services
Two jobs dominate the calls we get from Taft property owners: gates that no longer open or close properly, and electric systems that stopped responding to remotes, keypads, or sensors entirely.
Gate Repair in Taft
A sagging gate dragging its latch across the driveway, a hinge that screams every time the kids leave for school, a post that has pulled loose from sandy soil: these are daily repair calls in Taft. We repair before we recommend replacement, because most gates on older Taft lots are solid steel that simply needs new hardware, realignment, or a rebuilt post footing. Gate Repair in Taft covers hinges, latches, posts, gate frames, casters, and chain-link tension so your existing gate works securely again.
Electric Gate Repair in Taft
Automated gate systems in Taft take a beating from lightning-adjacent storms and humidity that creeps into control boards. When an operator hums but will not move the gate, or the keypad works only sometimes, the fault is usually in the board, a safety loop, or a limit switch, not the gate itself. Electric Gate Repair in Taft is a dedicated page for the diagnosis and repair of motorized systems from Viking, Ghost Controls, LiftMaster, FAAC, and other common brands installed across Taft.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Taft
A new gate in Taft has to solve two problems at once: it needs to handle Central Florida’s storm-driven moisture and sandy, shifting soil while meeting whatever wind-load or setback rules your HOA or Orange County requires. Tampa Gate Company installs manual and automated gates built for exactly these conditions, from single-swing driveway gates on older lots to sliding perimeter gates on newer Taft estates. We handle the complete project from first measurement to final operator programming, and we also provide the same expert service for Gate Installation anywhere in the Tampa area.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy gate by hand multiple times a day, or your property lacks a secure, code-compliant access barrier.
What it costs in Taft
Our installed automatic gate systems in Taft start around $2,850 for a basic single-swing operator on an existing gate, with most full installations landing between $4,000 and $9,500 depending on gate width and operator type.
How we do it
We measure the gate and post, confirm swing or slide direction against the driveway slope, set the operator on a reinforced pad, run the power from your panel to a weather-tight electrical box, wire the safety loops and photo eyes, then program remotes and test the full cycle at least 20 times.
Driveway Gate Installation
Signs you need it
Your driveway opens directly onto a busier Taft road and you want to control vehicle access without replacing the entire fence line.
What it costs in Taft
A new steel driveway gate in Taft, installed with hardware and set on new posts, typically runs $1,650 to $4,600 for single-swing configurations, while automated driveway gates start near $4,000 installed.
How we do it
We core or auger post holes at least 36 inches deep to get below Taft’s loose topsoil, set posts in high-strength concrete, hang the gate with adjustable hinges, and then dial in the latch and any operator so the gate closes square against its striker.
Sliding Gate Installation
Signs you need it
Your Taft lot has a steep or short driveway apron where a swing gate would bind, or the opening is too wide for a practical swing setup.
What it costs in Taft
Sliding gate installation in Taft generally falls between $2,900 and $8,600, with cantilever designs running higher when the gate spans more than 16 feet.
How we do it
We set a reinforced steel track or cantilever support system on concrete piers, install the roller trucks and guide posts, hang the gate panel, then attach the operator rack and tune the limit switches so the gate stops cleanly every cycle.
What Gate Installation Costs in Taft
| Item | Typical range in Taft |
|---|---|
| Single driveway gate, manual swing | $1,650 – $4,600 |
| Automatic gate operator on existing gate | $2,850 – $6,200 |
| Full automated swing or slide gate system | $4,000 – $9,500 |
Do I need HOA approval for a new gate in Taft?
If your Taft property sits in a newer master-planned or airport-adjacent HOA community, yes, you almost certainly need architectural review before any gate installation. Older standalone lots outside an HOA generally only need Orange County permitting if the gate is automated or exceeds certain height limits near the road right-of-way.
How long does a gate installation in Taft take?
Most residential gate installations in Taft take one to two days once posts are set, with an additional few days for concrete curing before an automatic operator is installed and tuned. Call (866) 976-0095 for a written timeline on your specific property.
Brands We Service in Taft
We work on Viking, Ghost Controls, and DoorKing systems specifically, among others, and keep common control boards and safety sensors stocked for faster turnaround on Taft jobs. If your operator is discontinued, we match it to a current equivalent rather than forcing a full replacement. See our brands page for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Taft, FL
| Service | Typical range in Taft |
|---|---|
| Hinge repair, residential swing gate | $120 – $400 |
| Gate post realignment or reset | $350 – $950 |
| Track or roller replacement, sliding gate | $250 – $800 |
| Control board replacement, electric gate | $450 – $1,200 |
| Safety sensor or photo eye replacement | $150 – $450 |
| Keypad, intercom, or access panel repair | $180 – $600 |
| Operator arm or motor replacement | $650 – $1,800 |
| Manual swing gate installation | $1,650 – $4,600 |
| Automatic gate installation, full system | $4,000 – $9,500 |
Prices in Taft push higher than average when posts have to be re-set in unstable sandy soil, when the gate needs wind reinforcement for hurricane code, or when an older buried electric line has to be re-run to the operator. Every estimate is quoted and agreed before any work starts, so there is no surprise on the invoice.
Neighborhoods We Serve in Taft
Tampa Gate Company covers all of Taft’s 32827 ZIP code, from the older residential streets on the east side of town to the new communities and commercial properties pressed against the airport corridor. We know the soil conditions, the HOA requirements, and the typical gate failures in each area.
- East Taft residential streets
- Airport-adjacent new developments
- Taft commercial and industrial corridor
- HOA communities near Orange Avenue
- Estate lots south of the airport
Response time across Taft is typically same-day for emergency gate failures, with scheduled installations booked within a week or two depending on permitting.
Service Area – Cities Near Taft
In addition to Taft, Tampa Gate Company serves the surrounding Orange County communities, including Meadow Woods, FL just to the southwest and Southchase, FL over along the Orange Blossom Trail corridor. We also run regular routes through Belle Isle, FL and Edgewood, FL for gate repair and installation jobs across the south Orlando area.
Serving Taft, FL — Our Local Coverage Area
We’re based in the Taft area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Taft
For a gate that is stuck open or closed and compromises security, we typically reach Taft properties the same day. Repairs that are not security-critical, like a sticky latch or a noisy opener, are usually scheduled within one or two business days. Call (866) 976-0095 and describe the fault and we will tell you honestly when we can be there.
Repairs to an existing gate rarely require anything beyond the work itself. New gate installations in Taft may require Orange County permitting, especially for automated systems, and HOA-governed communities in 32827 often have their own approval process and material restrictions. We handle permit coordination as part of the installation.
Yes, because much of Taft’s newer housing stock is under HOA covenants with specific rules on gate height, material, finish, and automation. We review your community’s architectural guidelines before we order materials, and we install to the letter of the spec so your gate passes final inspection without rework.
For any gate problem in Taft, from a rusted hinge on an older ranch home to a failed operator on a new estate gate, call Tampa Gate Company at (866) 976-0095. We know this area’s soil, storms, and HOA rules, and we quote every job before a single tool comes off the truck.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Taft Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer