Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Venice, FL
Gate installation in Venice, FL usually falls into two categories: replacing a corroded, storm-battered operator on an existing gate, or building a brand-new automated entry from scratch. Tampa Gate Company handles both, and we’ve served Venice since 2013. What makes the work here distinctive is the salt air. A galvanized steel post that would last fifteen years inland can start showing pitting within four or five seasons a few blocks from the Gulf. We spec hardware and control boards around that reality, not around what works in a typical Florida suburb. Call (866) 976-0095 if you’re planning a new gate or need an honest assessment of the one you have.
Why Venice Homes Are Different
Venice is a coastal retirement and snowbird town, and that shapes nearly every gate job we take on. On the barrier island in 34285 and the near-shore neighborhoods, salt-laden onshore air works on exposed metal year-round. Aluminum arms pit, hinges seize, and operator enclosures corrode at the seams. But the bigger pattern is vacancy. A gate that sits unopened from April to October has months for moisture to settle into the control board, for battery backups to sulfate, and for the chain or rack to bind. By the time the owner returns in November, a small spring failure has often become a seized mechanism.
Housing stock runs from 1960s through 1980s ranch and villa communities on the island and near downtown, up to newer gated deed-restricted communities east of the Intracoastal in 34292 and 34293. That means our technicians see a mix of aging original gate operators from the 1990s and early 2000s alongside modern sliding and swing systems in HOA-managed entries. The terrain is flat, so drainage matters more than grading: a gate post set in a low spot that holds standing water after summer thunderstorms will rot or rust years before one on higher ground. And surge damage after lightning storms is a recurring repair driver in Venice, particularly for control boards and safety loop detectors that sit exposed on the gate side of the property.
Styles & brands we work with
Our Main Venice Services
Most Venice calls come to us for one of two things: a gate that won’t open, or an electric system that’s doing something unpredictable. Here’s what each involves here.
Gate Repair in Venice
Repair work in Venice spans everything from realigning a sagging swing gate to replacing seized rollers on a sliding track. The salt and humidity here mean we troubleshoot corrosion as a contributing factor on most calls, even when the symptom looks purely mechanical. A gate that drags across the driveway may have a bent wheel, but in Venice it’s just as likely the track has rusted and swollen. We work on manual and automated hardware, and our repair-first approach means we’ll tell you when a part can be salvaged versus when replacement is genuinely cheaper. Gate Repair in Venice covers the full scope.
Electric Gate Repair in Venice
Electric gate failures in Venice often trace to the control board, a failed safety loop, or a battery backup that’s given out after a power surge. We diagnose the motor, board, and sensors as a system rather than swapping the most obvious part. On the island especially, salt creep into enclosures causes intermittent faults that generalists misdiagnose as dead motors. We’re experienced on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, so the diagnosis is usually fast. Electric Gate Repair in Venice details what we check and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Venice
New gate installation in Venice has to answer two questions up front: what material will stand up to salt air, and what operator is worth installing when lightning and humidity are working against it. We’ve installed gates across 34284, 34285, 34292, and 34293, from simple manual driveway gates on island homes to automated solar-powered swing gates in newer communities east of the Intracoastal. For the full scope of our installation service, see Gate Installation.
The common thread in Venice is that cheap hardware fails fast. We’d rather spec a powder-coated aluminum frame with stainless hardware than a steel gate that needs repainting every two years. Our installs start with a site visit to confirm post depth, drainage, and where the operator and safety loops will sit.
Automatic Gate Installation
Signs you need it
You’re replacing a manual gate or an operator that’s failed, and you want the entry automated with a keypad, remote, or intercom.
What it costs in Venice
A full automatic gate installation in Venice typically runs $4,800 – $12,500 depending on gate size, operator type, and whether new conduit and power must be run.
How we do it
We set posts and hang the gate, mount the operator, run low-voltage wiring for keypads and safety edges, then program remotes and test the full open/close cycle with safety loops active.
Driveway Gate Installation
Signs you need it
You want a gate across a residential driveway, either for privacy, pet containment, or to control who can pull onto the property.
What it costs in Venice
Driveway gate installation in Venice usually falls between $3,200 and $9,800, with swing gates on the lower end and heavier sliding gates on the upper end.
How we do it
We confirm the driveway width and slope, set the posts in concrete below the frost-free depth for this area, hang the gate, and install either a manual closer or an electric operator with remotes.
What Gate Installation Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Manual driveway gate, installed | $1,800 – $5,500 |
| Automated swing gate, single leaf | $4,800 – $9,500 |
| Automated sliding gate with operator | $6,500 – $12,500 |
These ranges reflect typical Venice conditions: salt-resistant hardware, stainless fasteners, and operators sized for frequent use. Prices go up when we have to run new electrical service to the gate, add a vehicle detection loop in the driveway, or rebuild an existing column that’s spalled from years of salt exposure.
How long does a gate installation take in Venice?
Most single-gate installations are completed in one to two days, assuming the posts, gate, and operator are in stock. Custom gate fabrication can add two to four weeks before installation day. We confirm a schedule and a written price before any work begins.
Do you handle the electrical and the safety loops as part of installation?
Yes. We pull permits when the city requires them, install the low-voltage wiring, set any vehicle detection loops, and test the safety edges and photo eyes before we call the job done.
Brands We Service in Venice
We service and install the brands most common in Venice neighborhoods: LiftMaster, FAAC, BFT, and Mighty Mule. We stock common replacement boards, remotes, and safety loop detectors for these systems, which means a one-day repair is often possible. For details on every system we work on, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Venice, FL
| Service | Typical range in Venice |
|---|---|
| Gate repair, diagnostic visit | $85 – $165 |
| Electric gate repair, control board | $350 – $900 |
| Electric gate repair, motor replacement | $650 – $1,700 |
| Safety loop replacement | $325 – $750 |
| Hinge or wheel replacement | $225 – $675 |
| Gate alignment and track adjustment | $175 – $450 |
| Manual gate installation | $1,800 – $5,500 |
| Automatic gate installation | $4,800 – $12,500 |
In Venice, prices push toward the upper end when salt corrosion has spread beyond the original failed part, when surge damage means replacing a board and a transformer together, or when an HOA gate has to be matched to existing hardware specifications. Whatever the number, you’ll get a written quote agreed before we start, and we never add surprises to the invoice.
Neighborhoods We Serve in Venice
We work across all four Venice ZIP codes, from the island neighborhoods in 34285 out to the newer communities in 34292 and 34293. Typical response for a broken gate is same-day or next-day, depending on parts and how far the job is from our tech’s current route.
- Venice Island and downtown (34285)
- Venice East and Pinebrook South (34292)
- Venice Gardens and South Venice (34293)
- Sorrento East and the area around Laurel Road (34284)
Service Area – Cities Near Venice
Beyond Venice proper, our techs regularly cover the communities immediately south and east. That includes South Venice, FL, Venice Gardens, FL, Laurel, FL, and Nokomis, FL. If you’re just outside the city line, call us and we’ll confirm coverage before you wait on a diagnosis.
Serving Venice, FL — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Venice
Most Venice calls are scheduled same-day or next day, especially when a gate is stuck open or won’t secure. If the gate is on the island and parts are in stock locally, a morning call often becomes an afternoon repair. Call (866) 976-0095 and we’ll give you a straight window.
Many gated communities in 34292 and 34293 have architectural review rules for gate style, height, and finish, and the city may require a permit for an automated operator. We’ll tell you which approvals apply to your property and can supply the specs the HOA or building department asks for.
Yes. We handle HOA and community entry gates in Venice, including repair work on slide gates, exit loops, keypads, and telephone entry systems. Our techs carry common replacement parts for LiftMaster and BFT systems so a board swap at a community entry can often happen on the first visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris