Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Oldsmar, FL
Gate installation in Oldsmar usually runs between $2,400 and $9,500 depending on the gate type, automation, and site conditions, and most projects take one to three days once materials are on site. Oldsmar’s mix of 1970s ranch homes, newer waterfront townhomes, and gated communities means almost every job involves a different driveway layout, setback, and post condition. Tampa Gate Company has served Oldsmar since 2013, and we handle both the gate itself and the operator, safety loops, and keypads that make it work as a system. Call (866) 976-0095 for a free on-site measure and a written price.
Why Oldsmar Homes Are Different
Oldsmar’s canal-front and bayfront neighborhoods sit in a salt-spray zone where wind-driven chloride from Old Tampa Bay attacks automatic gate operators, keypads, and hinges far faster than inland Pinellas County, so gate repair here is as much about corrosion rehabilitation as it is about motor or board replacement. We regularly replace rusted hinge pins and pitted keypad housings on gates that are only five or six years old along Shore Drive and the streets running north of Tampa Road toward the bay.
The housing stock compounds it. Oldsmar mixes 1970s through 1990s ranch and Mediterranean-style homes on large lots with newer waterfront townhomes and gated communities, many with long driveways and perimeter fencing that require automatic slide and swing gates rated for frequent use. Along the older canal streets, we routinely find original gate posts set only 18 to 24 inches deep, not below the high water table for a hurricane-rated footing, so a repair visit often becomes a post-reinforcement job after a storm season. Subtropical Gulf humidity, intense May through October thunderstorms, and hurricane-season wind loading mean gate work in Oldsmar frequently involves water intrusion into control boxes, lightning-damaged circuit boards, and post-storm alignment of panel and slide gates. That is the work, and it is different from what we see ten miles inland.
Styles & brands we work with
Our Main Oldsmar Services
The two services Oldsmar homeowners call about most are repair of a gate that stopped working and diagnosis of an electric gate system that moves intermittently or not at all. Each has its own page with full pricing and detail.
Gate Repair in Oldsmar
Gate repair in Oldsmar covers everything from a sagging manual gate that drags on the driveway to a slide gate that jumped its track after a storm. We start by finding why the gate failed, whether that is a bent hinge, a rotted post, a seized wheel, or a broken weld, then quote the fix before any work begins. Most repair calls are completed the same day, and we carry common hardware for LiftMaster, FAAC, BFT, and Viking systems on the truck. See the full breakdown on our Gate Repair in Oldsmar page.
Electric Gate Repair in Oldsmar
Electric gate repair in Oldsmar is its own discipline because a gate that does not move is usually not a mechanical problem. The failure is typically in the control board, a safety loop, a photo eye, a transformer, or a keypad, and guessing at those parts gets expensive. We diagnose the motor, board, and safety loop as a system, not as isolated components, and we work on Ghost Controls, DoorKing, Elite, and other major brands. Full pricing and common failure patterns are on the Electric Gate Repair in Oldsmar page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Oldsmar
Gate installation in Oldsmar usually costs between $2,400 and $9,500, with the spread driven by whether the gate is manual or automated, slide or swing, steel or aluminum, and how much site work the driveway and post footings require. Oldsmar’s long driveways and large lots mean many installations are slide gates rated for frequent use, and waterfront homes in the salt-spray zone benefit from aluminum or powder-coated steel rather than bare galvanized hardware. We measure, quote a fixed price, and install the gate and operator as one system so the first time the gate cycles, the safety edges and photo eyes are already dialed in. Tampa Gate Company handles both repair and full installation, which means the same team that fixes a broken gate can spec and install a new system when replacement is the right call. Gate Installation details live on the service hub page.
Automatic Gate Installation
Signs you need it
You are opening and closing the gate by hand more than once a day, or you have a manual gate on a long driveway with no way to open it from the house or car.
What it costs in Oldsmar
Automatic gate installation in Oldsmar typically runs $3,800 to $9,500 when the job includes the gate, operator, safety loops, keypad, and one or two remotes.
How we do it
We measure the driveway width and setbacks, set the operator bracket and conduit runs, install the gate and track, wire the control board, program the limits and safety edges, and test the full cycle with you on site.
Sliding Gate Installation
Signs you need it
Your driveway slopes or there is not enough room for a swing gate to arc open without hitting a wall, planter, or the sidewalk.
What it costs in Oldsmar
Sliding gate installation in Oldsmar typically runs $3,200 to $8,800, with the higher end covering longer gates, cantilever hardware, and automation on larger lots in 34677.
How we do it
We check the soil and drainage along the fence line, pour or retrofit the track footing, hang or cantilever the gate panel, align the rollers, and automate it if you want operator control.
Driveway Gate Installation
Signs you need it
You have a wide driveway opening, or you need the gate to span a full two-car entry with a single panel rather than paired leafs.
What it costs in Oldsmar
Driveway gate installation in Oldsmar typically runs $2,400 to $7,800 depending on steel versus aluminum, the track or swing hardware, and whether an operator is included.
How we do it
We set posts below the local water table where required, hang the panel, install the operator and safety loops if you are automating, and verify the gate clears the driveway at every point of its travel.
What Gate Installation Costs in Oldsmar
| Item | Typical range in Oldsmar |
|---|---|
| Manual driveway gate, installed | $2,400 – $4,800 |
| Automatic gate system with operator | $3,800 – $9,500 |
| Sliding gate with track and automation | $3,200 – $8,800 |
Do I need a permit for a gate in Oldsmar?
Most residential gate installations in Oldsmar require a permit, and HOAs in gated communities often have their own design standards on top of city code. We handle the application and can produce the drawings and spec sheets the city and HOA ask for.
How long does a gate installation take in Oldsmar?
Most gate installations run one to three days on site once materials arrive, with custom steel or aluminum panels adding a week or two of fabrication time. We give you a schedule at the quote so you are not waiting on a gate that has not been ordered yet.
Brands We Service in Oldsmar
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, and we stock common control boards, safety loops, remote transmitters, and limit switches for those brands. If your operator is one of those four, we can usually diagnose it on the first visit and have the right part on the truck or ordered the same day. Full brand coverage is on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Oldsmar, FL
| Service | Typical range in Oldsmar |
|---|---|
| Gate repair service call | $85 – $145 |
| Gate repair hourly labor | $95 – $135 |
| Gate spring replacement | $180 – $340 |
| Gate hinge replacement | $150 – $320 |
| Gate wheel or roller replacement | $140 – $310 |
| Gate opener motor replacement | $450 – $1,200 |
| Gate control board replacement | $350 – $950 |
| Manual driveway gate installation | $2,400 – $4,800 |
| Automatic gate system installation | $3,800 – $9,500 |
| Sliding gate installation with automation | $3,200 – $8,800 |
In Oldsmar, the main price movers are salt-corrosion damage on waterfront properties, water intrusion into control boxes after summer thunderstorms, and the 18-to-24-inch shallow posts we often find on older canal-street homes that have to be reinforced before a new gate can go on. The price you are quoted is the price you pay, and we agree on that number before any work starts.
Neighborhoods We Serve in Oldsmar
We cover all of 34677, including the canal streets near Old Tampa Bay, the newer townhome communities, and the older ranch-home neighborhoods east of the bay. Typical response time across Oldsmar is same-day or next-day for repair calls, depending on parts.
- Canal-front streets off Shore Drive
- East Lake Woodlands area
- Bayside Meadows
- Tampa Road corridor
- Boot Ranch
Service Area – Cities Near Oldsmar
Tampa Gate Company also covers the surrounding North Pinellas market. If you are across the bridge or just outside 34677, we regularly work in Safety Harbor, FL, Palm Harbor, FL, East Lake, FL, and Saint George, FL. Same scheduling and pricing apply across the area, and we quote every job before work begins.
Serving Oldsmar, FL — Our Local Coverage Area
We’re based in the Oldsmar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oldsmar
For repair calls, we are usually on site the same day or next business day in 34677. Most gate repairs are completed in one visit, and we carry common boards, loops, hinges, and remotes for the brands we service so we are not driving back for parts.
Yes. Many Oldsmar communities have HOA design standards for gate height, material, color, and operator type, and we prepare the submittal package and coordinate with the HOA and the city permit office as part of the job. We will tell you at the quote what your specific community requires.
Always. We diagnose or measure first, then give you a written price, and the price is agreed before any work starts. You will know the line items, the parts, and the labor total before you approve anything, and estimates are free. Call (866) 976-0095 to schedule yours.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oldsmar Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett