Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Saint George, FL
Gate installation in Saint George, FL usually means a residential driveway swing or slide gate on a compact 1970s to 1990s lot, or a pool safety gate that has to keep meeting Florida barrier code after years of salt air. Tampa Gate Company has served Saint George since 2013, and we work on the gate systems this area actually has: mostly manual and automated residential gates, plus the self-closing pool gates that Pinellas County inspectors check. If your gate won’t latch or your operator has seized up from corrosion, call (866) 976-0095 and we’ll diagnose it properly.
Why Saint George Homes Are Different
Saint George sits in ZIP 33761, an unincorporated Pinellas County community a few miles inland from Clearwater. The housing stock is mostly 1970s to 1990s single-family ranch homes and villa or townhome subdivisions on small lots. That means two things for gate work here. First, most gates are residential driveway swing or slide units, not large ornamental estate gates. Second, a large share of service calls involve pool enclosures and lanais, where the gate doubles as a Florida pool-barrier device and has to self-close and self-latch every time.
The climate does real damage. Salt-laden Gulf air sits a few miles west, and it gets into hinges, latches, operator housings, and fasteners. We regularly see hinge pins that have corroded until the gate sags, and operator gearboxes that have locked up from rust inside the housing. Hurricane-season wind loads add another layer: posts and anchors take repeated lateral stress, and a gate that was marginally installed ten years ago will start leaning or binding. In Saint George, the failure mode is almost always corrosion first, then structural loosening, then electronic failure. Knowing that order changes how we diagnose and what we recommend.
Styles & brands we work with
Our Main Saint George Services
Most Saint George homeowners call us for one of two problems: a gate that has stopped working mechanically, or an electric gate that has stopped responding. Here is what each service involves here.
Gate Repair in Saint George
Manual gate repair in Saint George is usually about corrosion and alignment. Hinges seize, latch hardware stiffens, posts shift in sandy Pinellas soil, and a gate that once swung freely starts dragging or won’t close at all. Pool safety gates are a constant call here because Florida code requires the gate to self-close and self-latch, and salt corrosion turns that mechanism stiff and unreliable within a few years. We replace hinges, rebuild posts, rehang the gate leaf, and adjust or replace the self-closing hardware so the gate works and the barrier requirement is met. Call (866) 976-0095 for Gate Repair in Saint George.
Electric Gate Repair in Saint George
Electric gates in Saint George fail in a predictable pattern: the operator or control board sits in a metal housing, humidity and salt air work their way in, and eventually the board shorts or the motor locks. We diagnose the full system: motor, control board, safety sensors, keypad or intercom, and the safety loop if one exists. Sometimes the fix is a replacement board or limit switch; sometimes the corrosion has damaged wiring at the hinge points. Either way, you get a technician who works on these systems every day, not a generalist guessing at it. For a full breakdown of what we check, see Electric Gate Repair in Saint George.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Saint George
A new gate in Saint George has to be spec’d for this environment, not pulled off a generic template. The salt air means galvanized or powder-coated steel and stainless hardware are the baseline, and the wind loads from hurricane season mean posts need deeper footers than a standard residential install. Most jobs here are driveway swing gates, sliding gates where the driveway is short, and pool-area safety gates that have to meet Florida barrier requirements from day one. Tampa Gate Company has served Saint George since 2013, and we install manual and automated systems, including full electric setups with operators, safety loops, keypads, and intercoms. If you are planning a new gate, start with our Gate Installation page to understand the full scope of what we do.
Automatic Gate Installation
Signs you need it
You want a driveway gate that opens from the car without getting out, or an existing manual gate that you want automated.
What it costs in Saint George
Automatic gate installation in Saint George typically ranges $3,500 to $9,000 depending on gate size, operator type, and access control components.
How we do it
We install the gate leaf and posts, mount the operator, run power, set safety sensors and loops, and program remotes and keypads, then test the full cycle.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through, sagging beyond repair, or you want a gate on a driveway that has never had one.
What it costs in Saint George
Driveway gate installation in Saint George typically ranges $2,500 to $7,000 for a single swing gate with manual or basic operator hardware.
How we do it
We check the driveway layout, soil, and wind exposure, set posts in concrete to the depth Saint George’s hurricane-season wind loads require, hang the gate, and adjust the swing.
Sliding Gate Installation
Signs you need it
Your driveway slopes up toward the house or you don’t have room for a swing gate to arc open.
What it costs in Saint George
Sliding gate installation in Saint George typically ranges $3,000 to $8,000 depending on gate length and whether the operator is included.
How we do it
We set the track or cantilever system, install the gate panel and roller trucks, mount the operator if required, and verify the gate travels smoothly under load.
What Gate Installation Costs in Saint George
| Item | Typical range in Saint George |
|---|---|
| Manual driveway swing gate | $2,500 – $6,000 |
| Automatic driveway gate with operator | $3,500 – $9,000 |
| Sliding gate with track and operator | $3,000 – $8,000 |
Do I need a permit for a gate in Saint George?
Most gate installations in unincorporated Pinellas County require a permit, especially when posts are set in concrete or electrical work is involved. We handle the permit paperwork for you and confirm requirements before work starts.
How long does a gate installation take in Saint George?
Most residential gate installations in Saint George take one to two days on site, depending on gate type, concrete curing time for posts, and whether the job includes an operator and electrical run. We’ll give you a written schedule before starting.
Brands We Service in Saint George
We work on Viking, Ghost Controls, DoorKing, and Elite systems, plus five other major gate brands common in Pinellas County. Because we focus on gates exclusively, we know the failure points on each brand and stock the parts that fail most often. Most Saint George repairs go faster because the right board, sensor, or limit switch is already on the truck. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Saint George, FL
| Service | Typical range in Saint George |
|---|---|
| Gate repair (hinges, latches, alignment) | $150 – $450 |
| Electric gate operator replacement | $700 – $1,600 |
| Control board replacement | $300 – $700 |
| Safety sensor or loop repair | $200 – $500 |
| Pool safety gate self-closing hardware | $120 – $350 |
| Manual driveway swing gate installation | $2,500 – $6,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $3,000 – $8,000 |
In Saint George, prices push toward the higher end when corrosion has spread into the post anchors or wiring and we have to rebuild structural or electrical components rather than just swap a part. You get a written price before any work starts, and it does not change unless you approve a change order first.
Neighborhoods We Serve in Saint George
We cover all of Saint George’s 33761 ZIP code, including the villa and townhome subdivisions along the main corridors and the older ranch-home streets near the Pinellas Trail. Response time for most gate repair calls anywhere in Saint George is typically same day or next day, depending on how early you call.
- Small-lot ranch home streets east of the Trail
- Villa and townhome subdivisions throughout 33761
- Pool-enclosure homes across Saint George
- Communities along the northern edge toward Safety Harbor
Service Area – Cities Near Saint George
Our service area extends from Saint George into the surrounding Pinellas County communities. We regularly work in Greenbriar, FL, Safety Harbor, FL, Oldsmar, FL, and Palm Harbor, FL, so if you are a few minutes down the road, the same Saint George technician can usually reach you on the same route.
Serving Saint George, FL — Our Local Coverage Area
We’re based in the Saint George area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Saint George
Most Saint George repair calls get same-day or next-day service depending on how early you call. Emergency calls for a gate stuck open or a failed operator get prioritized, because a gate that won’t close is a security problem, not a minor inconvenience. Call (866) 976-0095 as early as possible for the best chance at same-day.
Some Saint George villa and townhome communities have HOA design standards for gate style, height, and color, and those standards must be confirmed before installation. We’ll ask about your HOA during the quote and work within their requirements, or flag the issue so you can get approval before the gate goes in.
Yes. When we install an automated gate in Saint George, we handle the full electrical scope: the power run to the operator, the safety sensors, the keypad or intercom wiring, and the control board setup, all to Pinellas County code. You are not left coordinating a separate electrician for the gate circuit.
If your gate is down or you are planning a new one in Saint George, call Tampa Gate Company at (866) 976-0095 for a free estimate. We quote the price before any work starts, and we repair first before recommending replacement.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Saint George Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller