Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Pasadena, FL
Gate installation in South Pasadena is a different job than it is ten miles inland. The housing here runs to mid-century ranch homes and small 1950s-to-1970s bungalows on tight lots, many still holding their original chain-link or wrought-iron driveway gates. Between the subtropical Gulf humidity, salt-laden air off the intracoastal, and the storm-driven flooding that hits canal-front streets after a rough season, those gates rust, warp, and fall out of plumb faster than anywhere else in Pinellas. Tampa Gate Company has served South Pasadena since 2013, and we install and service gates built for exactly those conditions. Call (866) 976-0095 for a free estimate.
Why South Pasadena Homes Are Different
South Pasadena sits on a narrow strip between Boca Ciega Bay and the intracoastal, which means almost every block gets some combination of salt air, standing water after a king tide, and wind-driven rain during tropical storms. For a driveway or pool gate, that reality shows up as rusted hinges, seized rollers, and operators that have taken on moisture. The housing stock compounds it: most homes in the 33707 ZIP are older builds with original gate posts set shallow in sandy soil. When a season of storms passes through, those posts shift and the gate binds against the latch or drags across the driveway. We see it most often on properties along Pasadena Avenue and the canal-front streets east of Gulfport Boulevard, where water sits longer and salt concentrates in the soil.
Replacement parts here need to be corrosion-resistant, and realignment is a recurring job rather than a one-time fix. A gate that worked fine in January can be binding by August after a series of afternoon storms and a high-tide flood event. That’s the South Pasadena pattern: the gate itself may be sound, but the hardware and the post line have moved.
Styles & brands we work with
Our Main South Pasadena Services
Most calls we answer in South Pasadena fall into two buckets: gates that won’t open, and gate motors that have stopped responding entirely. Both are specialized jobs, and both are covered in depth on their own pages.
Gate Repair in South Pasadena
Repair work here often starts with the obvious, a bent hinge or a dragging gate leaf, and ends with the less obvious: a post that has shifted in sandy soil after a storm, or a latch that has corroded internally from salt air. We repair first, and replacement is only the recommendation when repair isn’t the right answer. For the full breakdown of what we repair and what it costs in this area, see Gate Repair in South Pasadena.
Electric Gate Repair in South Pasadena
Electric gate systems in South Pasadena live in a harsh environment, so we diagnose the entire circuit, not just the motor. A gate operator near the water can fail from a waterlogged control board, a corroded safety loop, or a breaker that has been tripping silently for weeks. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, so we know what those boards and safety sensors look like when the salt has gotten to them. The dedicated page covers the specifics: Electric Gate Repair in South Pasadena.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in South Pasadena
New gate installation in South Pasadena means solving for corrosion and storm pressure from day one, not just hanging a panel and calling it done. The older ranch and bungalow lots here don’t always have the setback or the post depth that a heavier automatic gate requires, so we account for that in the initial site measure. Our Gate Installation service covers the full arc: spec, post setting, panel fabrication, hardware, and the operator and safety system when the job calls for it. We hand every customer a written price before any work starts, and that price is the price.
Automatic Gate Installation
Signs you need it
You are still getting out of the car to open a driveway gate by hand, or a manual gate has been patched so many times that the leaf sags and scrapes.
What it costs in South Pasadena
Automatic gate installation in South Pasadena typically runs $1,995 to $5,900 for a residential driveway system, with canal-front and flood-prone lots at the higher end.
How we do it
We measure the driveway opening, check the post line for plumb and soil stability, set corrosion-resistant posts to proper depth, hang the gate leaf, and install the operator, battery backup when applicable, and safety loops before final alignment and testing.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rotted at the post line, the hinges have been welded over more than once, or the current gate simply doesn’t match the security level you need.
What it costs in South Pasadena
A new driveway gate in South Pasadena falls between $1,995 and $5,900 installed, depending on width, material, and whether you add an operator.
How we do it
We remove the old gate and hardware, inspect and reset posts as needed, hang the new leaf with sealed bearings and corrosion-resistant hinges, and adjust the latch, stops, and travel so the gate opens and closes cleanly.
Electric Gate Installation
Signs you need it
You are adding a gate operator to an existing manual gate, or replacing an operator that has failed from water intrusion or recurring electrical problems.
What it costs in South Pasadena
Electric gate installation here runs $1,995 to $5,900 for the full system, including the operator, safety loops, and wiring, with the high end covering new posts and panel.
How we do it
We install the operator on a level, reinforced base, run the low-voltage wiring through sealed conduit, set the safety loops and edge sensors, and program the control board before testing cycle speed and obstruction detection.
Sliding Gate Installation
Signs you need it
You have a very short driveway apron or a lot where a swinging gate would conflict with the street or the sidewalk, so the gate needs to slide rather than swing.
What it costs in South Pasadena
Sliding gate installation in South Pasadena runs from $2,500 to $5,900 depending on the track length, the gate material, and the operator that gets paired with it.
How we do it
We lay a level track bed, set the guide rollers and stops, hang and square the sliding leaf, mount the operator, and then adjust the travel and safety sensors until the cycle is smooth and consistent.
What Gate Installation Costs in South Pasadena
| Item | Typical range in South Pasadena |
|---|---|
| Manual gate installation (basic driveway or pool) | $995 – $2,500 |
| Automatic gate installation (operator included) | $1,995 – $5,900 |
| Sliding gate installation (track, panel, operator) | $2,500 – $5,900 |
How long does a gate installation take in South Pasadena?
Most driveway gate installations in South Pasadena take one to two days. Electric and sliding gates run two to three days when a new post line, conduit, and control wiring are part of the job. We sequence the post work first so the concrete sets before the panel and operator go on.
Do I need a permit for a new gate in South Pasadena?
Many gate projects in South Pasadena don’t require a permit for a straight replacement on existing posts, but new post lines, foundation work, or anything that changes access can. We handle the details and can tell you what applies to your street and lot before work begins.
Brands We Service in South Pasadena
We service and install LiftMaster, FAAC, BFT, and Mighty Mule systems in South Pasadena, which covers the majority of residential operators in the 33707 ZIP. We keep common control boards, safety sensors, remotes, and gate hardware on hand, so most repairs do not wait on a parts order. See our brands for the full list of systems we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Pasadena, FL
| Service | Typical range in South Pasadena |
|---|---|
| Manual gate installation | $995 – $2,500 |
| Automatic gate installation | $1,995 – $5,900 |
| Electric gate installation | $1,995 – $5,900 |
| Driveway gate installation | $1,995 – $5,900 |
| Sliding gate installation | $2,500 – $5,900 |
| Gate post replacement | $350 – $900 per post |
| Gate hinge replacement | $150 – $450 |
| Gate latch and lock replacement | $125 – $350 |
| Gate wheel and roller replacement | $100 – $300 |
| Gate frame rust repair | $250 – $750 |
| Electric gate operator replacement | $1,150 – $2,200 |
| Control board replacement | $250 – $950 |
Salt air and flood exposure push South Pasadena prices toward the high end of those ranges because the hardware has to be corrosion-rated and the post beds often need more work than they would inland. Every job is quoted in writing before we start, and that quote is what you pay.
Neighborhoods We Serve in South Pasadena
We work across the full 33707 ZIP, from the canal-front streets to the blocks closer to Pasadena Avenue and the smaller bungalow pockets. Most of our South Pasadena calls get a same-visit or next-day response, depending on the current schedule and the nature of the job.
- Boca Ciega Bay waterfront
- Pasadena Avenue corridor
- Canal-front neighborhoods east of Gulfport Boulevard
- South Pasadena core near City Hall
- Northwest neighborhoods toward Bear Creek
Service Area – Cities Near South Pasadena
South Pasadena sits in the middle of a tight cluster of Pinellas communities, and we run service across all of them. If you’re in Gulfport, FL, Saint Pete Beach, FL, Treasure Island, FL, or St. Petersburg, FL, the same gate specialist who works South Pasadena covers your area too.
Serving South Pasadena, FL — Our Local Coverage Area
We’re based in the South Pasadena area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Pasadena
We schedule South Pasadena calls throughout the week, with most diagnostics and repairs getting a same-visit or next-day slot. Storm-season backlog is real, so a waterlogged operator after a named storm may wait a day or two while we clear the most urgent canal-front jobs first. Call us and we’ll give you the next available window.
South Pasadena has several small HOAs and condo associations with specific gate height, style, and finish requirements. We work with those rules regularly, and we can tell you during the estimate whether your planned gate needs board or architectural review before installation.
We work on the full range, including the original chain-link and wrought-iron gates that are still standing on many South Pasadena lots from the 1950s and 60s. Those older gates often need post resetting and corrosion work more than outright replacement, and we repair first by default.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What South Pasadena Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman